FTS-105-01-L-S single-row programming header
Public Made by Adomby adom
Exact single-row header; provisional mechanical and process qualification.
name: fts-105-01-l-s description: Import and check the exact Samtec single-row programming header and custom cable mapping.
FTS-105-01-L-S
Parent skill: wiki-component.
Read README.md and provenance.json. Preserve -S through-hole single row, -01 height and -L plating. Use the single-row drawing, not the double-row default link on the product page.
The model is nominal original geometry, not manufacturer CAD. Drawing A is seating-to-tip; do not add housing height again. Review 0.71 mm recommended holes against actual finished drill tolerances. Existing board24 uses 0.65 mm and remains under review.
J11 uses a custom 3V3, SWDIO, SWCLK, NRST, GND order. The header is unkeyed and is not a standard ten-pin Cortex connector. Verify the mating cable and voltage before connecting. Preserve physical qualification gates.
---
name: fts-105-01-l-s
description: Import and check the exact Samtec single-row programming header and custom cable mapping.
---
# FTS-105-01-L-S
Parent skill: wiki-component.
Read README.md and provenance.json. Preserve -S through-hole single row, -01 height and -L plating. Use the single-row drawing, not the double-row default link on the product page.
The model is nominal original geometry, not manufacturer CAD. Drawing A is seating-to-tip; do not add housing height again. Review 0.71 mm recommended holes against actual finished drill tolerances. Existing board24 uses 0.65 mm and remains under review.
J11 uses a custom 3V3, SWDIO, SWCLK, NRST, GND order. The header is unkeyed and is not a standard ten-pin Cortex connector. Verify the mating cable and voltage before connecting. Preserve physical qualification gates.