component
FT93C46A-UDR-B
Public Made by Adomby adom
FMD(Fremont Micro Devices) EEPROM, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
e377598
FT93C46A-UDR-B
FMD(Fremont Micro Devices) · EEPROM · DIP-8
FT93C46A-UDR-B from FMD(Fremont Micro Devices), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input that enables the device; a rising edge on CS with SCL held low starts each instruction. |
| 2 | SCL | input | Serial Clock input whose rising edge latches data into the EEPROM and clocks data out (up to 2 MHz at 4.5V to 5.5V). |
| 3 | DI | input | Serial Data Input carrying the start bit, op-code, address and data bits. |
| 4 | DO | tri_state | Serial Data Output that clocks out read data and indicates READY/BUSY status when CS is brought high; high impedance when CS is low. |
| 5 | GND | power_in | Ground. |
| 6 | ORG | input | Internal organization select: x16 when tied to VCC or left unconnected (internally recognized as VIH), x8 when tied to ground. |
| 7 | DC | unconnected | Don't Connect pin. |
| 8 | VCC | power_in | Power supply, 1.8V to 5.5V for the FT93C46A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FMD(Fremont Micro Devices) |
| Package | DIP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (1.8V range) | VCC1 | 1.8 | 5.5 | V | 10 | ||
| Supply Current READ | ICC | 0.5 | 2 | mA | VCC = 5.0V, READ at 1.0 MHz | 10 | |
| Supply Current WRITE | ICC | 0.5 | 2 | mA | VCC = 5.0V, WRITE at 1.0 MHz | 10 | |
| Standby Current | ISB1 | 0.1 | µA | VCC = 1.8V CS = 0V | 10 | ||
| Standby Current | ISB2 | 1.5 | µA | VCC = 2.5V CS = 0V | 10 | ||
| Input Leakage | IIL | 0.1 | 1 | µA | Vin = 0V to VCC | 10 | |
| Output Leakage | IOL | 0.1 | 1 | µA | Vin = 0V to VCC | 10 | |
| Input Low Voltage | VIL1 | -0.6 | 0.8 | V | 4.5V ≤ VCC ≤ 5.5V | 10 | |
| Input Low Voltage | VIL2 | -0.6 | 0.3 | V | 1.8V ≤ VCC ≤ 2.7V; max printed VCC x 0.3 (0.3 is the multiplier) | 10 | |
| Output Low Voltage | VOL1 | 0.4 | V | IOL = 2.1 mA | 10 | ||
| Output High Voltage | VOH1 | 2.4 | V | 4.5V ≤ VCC ≤ 5.5V, IOH = -0.4 mA | 10 | ||
| Output Low Voltage | VOL2 | 0.2 | V | IOL = 0.15 mA | 10 | ||
| SCL Clock Frequency | fSCL | 0 | 2 | MHz | 4.5V ≤ VCC ≤ 5.5V | 9 | |
| SCL Clock Frequency | fSCL | 0 | 1 | MHz | 2.7V ≤ VCC ≤ 5.5V | 9 | |
| SCL Clock Frequency | fSCL | 0 | 0.25 | MHz | 1.8V ≤ VCC ≤ 5.5V | 9 | |
| SCL High Time | tSCLH | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| SCL Low Time | tSCLL | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| Minimum CS Low Time | tCS | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| CS Setup Time | tCSS | 200 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| DI Setup Time | tDIS | 400 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| CS Hold Time | tCSH | 0 | ns | 9 | |||
| DI Hold Time | tDIH | 400 | ns | 1.8V ≤ VCC ≤ 5.5V | 9 | ||
| Output Delay to 1 | tPD1 | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test | 9 | ||
| Output Delay to 0 | tPD0 | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test | 9 | ||
| CS to Status Valid | tSV | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test | 9 | ||
| CS to DO in High Impedance | tDF | 400 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test, CS = VIL | 9 | ||
| Write Cycle Time | tWC | 3 | 10 | ms | 4.5V ≤ VCC ≤ 5.5V | 9 | |
| Operating temperature (industrial) | -40 | 85 | °C | 2 | |||
| Storage temperature | -50 | 125 | °C | 2 | |||
| Maximum voltage | 8 | V | 2 |
CAD (KiCad official)
- Symbol:
FT93C46A-UDR-B - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
ft93c46a-udr-b-etched.step/ft93c46a-udr-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ft93c46a-udr-b.step/ft93c46a-udr-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FMD(Fremont Micro Devices) datasheet (24 pp, sha256
65559b4f3db0bd20, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FT93C46A-UDR-B
**FMD(Fremont Micro Devices)** · EEPROM · DIP-8
FT93C46A-UDR-B from FMD(Fremont Micro Devices), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input that enables the device; a rising edge on CS with SCL held low starts each instruction. |
| 2 | SCL | input | Serial Clock input whose rising edge latches data into the EEPROM and clocks data out (up to 2 MHz at 4.5V to 5.5V). |
| 3 | DI | input | Serial Data Input carrying the start bit, op-code, address and data bits. |
| 4 | DO | tri_state | Serial Data Output that clocks out read data and indicates READY/BUSY status when CS is brought high; high impedance when CS is low. |
| 5 | GND | power_in | Ground. |
| 6 | ORG | input | Internal organization select: x16 when tied to VCC or left unconnected (internally recognized as VIH), x8 when tied to ground. |
| 7 | DC | unconnected | Don't Connect pin. |
| 8 | VCC | power_in | Power supply, 1.8V to 5.5V for the FT93C46A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FMD(Fremont Micro Devices) |
| Package | DIP-8 |
| Category | Memory |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (1.8V range) | VCC1 | 1.8 | | 5.5 | V | | 10 |
| Supply Current READ | ICC | | 0.5 | 2 | mA | VCC = 5.0V, READ at 1.0 MHz | 10 |
| Supply Current WRITE | ICC | | 0.5 | 2 | mA | VCC = 5.0V, WRITE at 1.0 MHz | 10 |
| Standby Current | ISB1 | | | 0.1 | µA | VCC = 1.8V CS = 0V | 10 |
| Standby Current | ISB2 | | | 1.5 | µA | VCC = 2.5V CS = 0V | 10 |
| Input Leakage | IIL | | 0.1 | 1 | µA | Vin = 0V to VCC | 10 |
| Output Leakage | IOL | | 0.1 | 1 | µA | Vin = 0V to VCC | 10 |
| Input Low Voltage | VIL1 | -0.6 | | 0.8 | V | 4.5V ≤ VCC ≤ 5.5V | 10 |
| Input Low Voltage | VIL2 | -0.6 | | 0.3 | V | 1.8V ≤ VCC ≤ 2.7V; max printed VCC x 0.3 (0.3 is the multiplier) | 10 |
| Output Low Voltage | VOL1 | | | 0.4 | V | IOL = 2.1 mA | 10 |
| Output High Voltage | VOH1 | 2.4 | | | V | 4.5V ≤ VCC ≤ 5.5V, IOH = -0.4 mA | 10 |
| Output Low Voltage | VOL2 | | | 0.2 | V | IOL = 0.15 mA | 10 |
| SCL Clock Frequency | fSCL | 0 | | 2 | MHz | 4.5V ≤ VCC ≤ 5.5V | 9 |
| SCL Clock Frequency | fSCL | 0 | | 1 | MHz | 2.7V ≤ VCC ≤ 5.5V | 9 |
| SCL Clock Frequency | fSCL | 0 | | 0.25 | MHz | 1.8V ≤ VCC ≤ 5.5V | 9 |
| SCL High Time | tSCLH | 1000 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 9 |
| SCL Low Time | tSCLL | 1000 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 9 |
| Minimum CS Low Time | tCS | 1000 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 9 |
| CS Setup Time | tCSS | 200 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 9 |
| DI Setup Time | tDIS | 400 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 9 |
| CS Hold Time | tCSH | 0 | | | ns | | 9 |
| DI Hold Time | tDIH | 400 | | | ns | 1.8V ≤ VCC ≤ 5.5V | 9 |
| Output Delay to 1 | tPD1 | | | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test | 9 |
| Output Delay to 0 | tPD0 | | | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test | 9 |
| CS to Status Valid | tSV | | | 1000 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test | 9 |
| CS to DO in High Impedance | tDF | | | 400 | ns | 1.8V ≤ VCC ≤ 5.5V, AC Test, CS = VIL | 9 |
| Write Cycle Time | tWC | | 3 | 10 | ms | 4.5V ≤ VCC ≤ 5.5V | 9 |
| Operating temperature (industrial) | | -40 | | 85 | °C | | 2 |
| Storage temperature | | -50 | | 125 | °C | | 2 |
| Maximum voltage | | | | 8 | V | | 2 |
## CAD (KiCad official)
- Symbol: `FT93C46A-UDR-B`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `ft93c46a-udr-b-etched.step` / `ft93c46a-udr-b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ft93c46a-udr-b.step` / `ft93c46a-udr-b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FMD(Fremont Micro Devices) datasheet](docs/ft93c46a-udr-b-datasheet.pdf) (24 pp, sha256 `65559b4f3db0bd20`, retrieved 2026-10-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ft93c46a-udr-b-datasheet.pdf)