main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ft93c46a-udr-b: viewers · Ray
ft93c46a-udr-b-etched.glb Publish 0.1.0 · Ray
ft93c46a-udr-b-etched.step ft93c46a-udr-b: factory component page (tier=lcsc) · Ray
ft93c46a-udr-b-hero.glb ft93c46a-udr-b: hero GLB from the etched model (keeps the MPN mark) · Ray
ft93c46a-udr-b-hero.overlay.json Publish 0.1.0 · Ray
ft93c46a-udr-b.glb Publish 0.1.0 · Ray
ft93c46a-udr-b.kicad_mod Publish 0.1.0 · Ray
ft93c46a-udr-b.kicad_sym Publish 0.1.0 · Ray
ft93c46a-udr-b.lbr Publish 0.1.0 · Ray
ft93c46a-udr-b.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

FT93C46A-UDR-B

FMD(Fremont Micro Devices) · EEPROM · DIP-8

FT93C46A-UDR-B from FMD(Fremont Micro Devices), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Chip Select input that enables the device; a rising edge on CS with SCL held low starts each instruction.
2 SCL input Serial Clock input whose rising edge latches data into the EEPROM and clocks data out (up to 2 MHz at 4.5V to 5.5V).
3 DI input Serial Data Input carrying the start bit, op-code, address and data bits.
4 DO tri_state Serial Data Output that clocks out read data and indicates READY/BUSY status when CS is brought high; high impedance when CS is low.
5 GND power_in Ground.
6 ORG input Internal organization select: x16 when tied to VCC or left unconnected (internally recognized as VIH), x8 when tied to ground.
7 DC unconnected Don't Connect pin.
8 VCC power_in Power supply, 1.8V to 5.5V for the FT93C46A.

Key specifications

Parameter Value
Manufacturer FMD(Fremont Micro Devices)
Package DIP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (1.8V range) VCC1 1.8 5.5 V 10
Supply Current READ ICC 0.5 2 mA VCC = 5.0V, READ at 1.0 MHz 10
Supply Current WRITE ICC 0.5 2 mA VCC = 5.0V, WRITE at 1.0 MHz 10
Standby Current ISB1 0.1 µA VCC = 1.8V CS = 0V 10
Standby Current ISB2 1.5 µA VCC = 2.5V CS = 0V 10
Input Leakage IIL 0.1 1 µA Vin = 0V to VCC 10
Output Leakage IOL 0.1 1 µA Vin = 0V to VCC 10
Input Low Voltage VIL1 -0.6 0.8 V 4.5V ≤ VCC ≤ 5.5V 10
Input Low Voltage VIL2 -0.6 0.3 V 1.8V ≤ VCC ≤ 2.7V; max printed VCC x 0.3 (0.3 is the multiplier) 10
Output Low Voltage VOL1 0.4 V IOL = 2.1 mA 10
Output High Voltage VOH1 2.4 V 4.5V ≤ VCC ≤ 5.5V, IOH = -0.4 mA 10
Output Low Voltage VOL2 0.2 V IOL = 0.15 mA 10
SCL Clock Frequency fSCL 0 2 MHz 4.5V ≤ VCC ≤ 5.5V 9
SCL Clock Frequency fSCL 0 1 MHz 2.7V ≤ VCC ≤ 5.5V 9
SCL Clock Frequency fSCL 0 0.25 MHz 1.8V ≤ VCC ≤ 5.5V 9
SCL High Time tSCLH 1000 ns 1.8V ≤ VCC ≤ 5.5V 9
SCL Low Time tSCLL 1000 ns 1.8V ≤ VCC ≤ 5.5V 9
Minimum CS Low Time tCS 1000 ns 1.8V ≤ VCC ≤ 5.5V 9
CS Setup Time tCSS 200 ns 1.8V ≤ VCC ≤ 5.5V 9
DI Setup Time tDIS 400 ns 1.8V ≤ VCC ≤ 5.5V 9
CS Hold Time tCSH 0 ns 9
DI Hold Time tDIH 400 ns 1.8V ≤ VCC ≤ 5.5V 9
Output Delay to 1 tPD1 1000 ns 1.8V ≤ VCC ≤ 5.5V, AC Test 9
Output Delay to 0 tPD0 1000 ns 1.8V ≤ VCC ≤ 5.5V, AC Test 9
CS to Status Valid tSV 1000 ns 1.8V ≤ VCC ≤ 5.5V, AC Test 9
CS to DO in High Impedance tDF 400 ns 1.8V ≤ VCC ≤ 5.5V, AC Test, CS = VIL 9
Write Cycle Time tWC 3 10 ms 4.5V ≤ VCC ≤ 5.5V 9
Operating temperature (industrial) -40 85 °C 2
Storage temperature -50 125 °C 2
Maximum voltage 8 V 2

CAD (KiCad official)

  • Symbol: FT93C46A-UDR-B
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: ft93c46a-udr-b-etched.step / ft93c46a-udr-b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft93c46a-udr-b.step / ft93c46a-udr-b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FMD(Fremont Micro Devices) datasheet (24 pp, sha256 65559b4f3db0bd20, retrieved 2026-10-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF