main
Ray Publish 0.1.0 f21a161
{
  "slug": "ft8215q",
  "version": "0.1.0",
  "type": "component",
  "description": "Fortior Tech Motor Driver ICs, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ft8215q",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ft8215q.kicad_sym",
    "ft8215q.kicad_mod",
    "ft8215q.glb",
    "ft8215q.step",
    "ft8215q.lbr",
    "docs/hero.png",
    "docs/ft8215q-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ft8215q-hero.glb",
    "ft8215q-hero.overlay.json",
    "ft8215q-etched.glb"
  ],
  "component": {
    "mpn": "FT8215Q",
    "manufacturer": "Fortior Tech",
    "package": "QFN-24(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/52a95e3b7133e833a5fe563b27ad3c96.pdf",
    "parts": {
      "symbol": "ft8215q.kicad_sym",
      "footprint": "ft8215q.kicad_mod",
      "model_3d": "ft8215q-hero.glb",
      "model_3d_plain": "ft8215q-etched.glb",
      "model_3d_step": "ft8215q-etched.step",
      "model_3d_step_plain": "ft8215q.step",
      "lbr": "ft8215q.lbr"
    },
    "distributor_links": {
      "lcsc": "C5126649"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T04:43:19Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CP1",
        "type": "output",
        "description": "Charge-pump pin; a 0.1 μF capacitor is connected between CP2 and CP1."
      },
      {
        "number": "2",
        "name": "VDD5",
        "type": "power_out",
        "description": "5 V LDO output that needs a 1 μF to 4.7 μF capacitor to ground; operating range 4.8-5.2 V at 0-10 mA load."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "4",
        "name": "VREF",
        "type": "power_in",
        "description": "ADC reference voltage (4.3-4.7 V, 4.5 V typ) that needs a 1 μF or larger capacitor to ground and must not be used to power external circuits."
      },
      {
        "number": "5",
        "name": "DIR",
        "type": "input",
        "description": "Motor direction control with internal pull-up (default high): 0 gives reverse with output phase sequence U→W→V, and 1 gives forward with output phase sequence U→V→W."
      },
      {
        "number": "6",
        "name": "SMP",
        "type": "input",
        "description": "Bus current sampling input used in single-resistor mode."
      },
      {
        "number": "7",
        "name": "ASPEED",
        "type": "input",
        "description": "Analog voltage speed-control input, valid over 0 to VREF V when analog speed control is selected."
      },
      {
        "number": "8",
        "name": "SPEED/SCL",
        "type": "bidirectional",
        "description": "Speed input for PWM (20 Hz-100 kHz) or CLOCK (20-1400 Hz) control, with VIH of 2.5 V min and VIL of 0.6 V max, and it serves as I2C SCL when I2C speed control is selected."
      },
      {
        "number": "9",
        "name": "FG/SDA",
        "type": "bidirectional",
        "description": "Open-collector speed-feedback or fault (RD) output, and it serves as I2C SDA when I2C speed control is selected."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply pin."
      },
      {
        "number": "11",
        "name": "W",
        "type": "output",
        "description": "W-phase motor output."
      },
      {
        "number": "12",
        "name": "W",
        "type": "output",
        "description": "W-phase motor output."
      },
      {
        "number": "13",
        "name": "VSL",
        "type": "output",
        "description": "Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground."
      },
      {
        "number": "14",
        "name": "VSL",
        "type": "output",
        "description": "Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground."
      },
      {
        "number": "15",
        "name": "V",
        "type": "power_in",
        "description": "V-phase motor output."
      },
      {
        "number": "16",
        "name": "V",
        "type": "power_in",
        "description": "V-phase motor output."
      },
      {
        "number": "17",
        "name": "VSL",
        "type": "output",
        "description": "Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground."
      },
      {
        "number": "18",
        "name": "VSL",
        "type": "output",
        "description": "Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground."
      },
      {
        "number": "19",
        "name": "U",
        "type": "output",
        "description": "U-phase motor output."
      },
      {
        "number": "20",
        "name": "U",
        "type": "output",
        "description": "U-phase motor output."
      },
      {
        "number": "21",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply, 5 V to 18 V DC, with a capacitor of at least 1 μF to ground."
      },
      {
        "number": "22",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply pin."
      },
      {
        "number": "23",
        "name": "VCP",
        "type": "power_out",
        "description": "Charge-pump output that needs a 1 μF to 4.7 μF capacitor to VCC."
      },
      {
        "number": "24",
        "name": "CP2",
        "type": "output",
        "description": "Charge-pump pin; a 0.1 μF capacitor is connected between CP2 and CP1."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin-number-to-position mapping for the QFN24 pin diagram (page 7) is garbled in the extracted te; KiCad type mapping is my judgment: the datasheet uses AO, AI, DO, DI, DB and P codes. I mapped AO to; Pins 11/12, 15/16, 19/20, 13/14 and 17/18 are duplicate-name pins listed separately in the table, so",
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0617,
        "at": "2026-11-05T04:43:07"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/52a95e3b7133e833a5fe563b27ad3c96.pdf",
        "pages": 20,
        "sha256": "b3819660764ec3a4",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ft8215q.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ft8215q-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8f8bbbead3f941a547cffa97e72b3da158f62b4e47ef63d87bcaa4ff9b66bb8d",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "QFN24_4X4",
      "source_page": 9,
      "D": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "E1": {
        "nom_mm": 4.0,
        "range_mm": [
          3.9,
          4.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.75,
        "range_mm": [
          0.7,
          0.8
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ft8215q.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}