main
History Download
Ray Publish 0.1.0 f21a161

FT8215Q

Fortior Tech · Motor Driver ICs · QFN-24(4x4)

FT8215Q from Fortior Tech, in a QFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CP1 output Charge-pump pin; a 0.1 μF capacitor is connected between CP2 and CP1.
2 VDD5 power_out 5 V LDO output that needs a 1 μF to 4.7 μF capacitor to ground; operating range 4.8-5.2 V at 0-10 mA load.
3 GND power_in Ground.
4 VREF power_in ADC reference voltage (4.3-4.7 V, 4.5 V typ) that needs a 1 μF or larger capacitor to ground and must not be used to power external circuits.
5 DIR input Motor direction control with internal pull-up (default high): 0 gives reverse with output phase sequence U→W→V, and 1 gives forward with output phase sequence U→V→W.
6 SMP input Bus current sampling input used in single-resistor mode.
7 ASPEED input Analog voltage speed-control input, valid over 0 to VREF V when analog speed control is selected.
8 SPEED/SCL bidirectional Speed input for PWM (20 Hz-100 kHz) or CLOCK (20-1400 Hz) control, with VIH of 2.5 V min and VIL of 0.6 V max, and it serves as I2C SCL when I2C speed control is selected.
9 FG/SDA bidirectional Open-collector speed-feedback or fault (RD) output, and it serves as I2C SDA when I2C speed control is selected.
10 VCC power_in Input supply pin.
11 W output W-phase motor output.
12 W output W-phase motor output.
13 VSL output Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground.
14 VSL output Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground.
15 V power_in V-phase motor output.
16 V power_in V-phase motor output.
17 VSL output Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground.
18 VSL output Low-side bridge ground terminal that must not exceed 0.5 V relative to VSS; in single-resistor mode it connects to the sense resistor, and in dual/triple-resistor mode it is tied directly to ground.
19 U output U-phase motor output.
20 U output U-phase motor output.
21 VCC power_in Input supply, 5 V to 18 V DC, with a capacitor of at least 1 μF to ground.
22 VCC power_in Input supply pin.
23 VCP power_out Charge-pump output that needs a 1 μF to 4.7 μF capacitor to VCC.
24 CP2 output Charge-pump pin; a 0.1 μF capacitor is connected between CP2 and CP1.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Fortior Tech
Package QFN-24(4x4)
Category Power Supply Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating junction temperature Tj -40 150 ℃ 12
Storage temperature Tstg -55 150 ℃ 12
VCC voltage relative to VSS VCC -0.3 22 V 12
VDD5 voltage relative to VSS VDD5 -0.3 5 6.5 V 12
FG, U, V, W, CP1 voltage relative to VSS (printed max VCC + 0.3 V) FG,U,V,W,CP1 -0.3 V 12
VSL voltage relative to VSS VSL -0.3 0.5 V 12
VCP, CP2 voltage relative to VSS (printed max VCC + 6.0 V) VCP,CP2 -0.3 V 12
VREF/DIR/SMP/ASPEED/SPEED voltage relative to VSS (printed max VDD5 + 0.3 V) VREF,DIR,SMP,ASPEED,SPEED -0.3 V 12
VCC operating voltage VCC 5 18 V 12
VDD5 operating voltage VDD5 4.8 5 5.2 V I = 0 ~ 10mA 12
VREF reference voltage VREF 4.3 4.5 4.7 V 12
VCC operating current, average IVCC 2 A TA = 25℃ 平均值 12
VCC operating current, average IVCC 1.8 A TA = 85℃ 平均值 12
On-resistance, high-side MOS + low-side MOS Rdson 0.22 0.4 Ω 12
VCC undervoltage protection threshold VUVLO 3.2 3.5 3.8 V 12
Overcurrent protection threshold Iocp 3.5 4 4.5 A 13
Thermal shutdown hysteresis TTSD_HYS 15 20 ℃ 13
Input high voltage (printed max VDD5) VIH 2.5 V 13
Input low voltage VIL 0 0.6 V 13
PWM speed input frequency range, minimum 20 Hz 13
PWM speed input frequency range, maximum 100 kHz 13
CLOCK speed input frequency range 20 1400 Hz 13
ASPEED analog speed input voltage range (printed max VREF) ASPEED 0 V 13
Thermal resistance, junction to ambient θJA 50 ℃/W JEDEC standard, 2S2P PCB 13
Thermal resistance, junction to package surface θJA 25 ℃/W JEDEC standard, 2S2P PCB 13

CAD (KiCad official)

  • Symbol: FT8215Q
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: QFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: ft8215q-etched.step / ft8215q-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft8215q.step / ft8215q.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Fortior Tech datasheet (20 pp, sha256 b3819660764ec3a4, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF