main
Ray Publish 0.1.0 001c600
{
  "slug": "ft8132q",
  "version": "0.1.0",
  "type": "component",
  "description": "Fortior Tech Motor Driver ICs, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "ft8132q",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ft8132q.kicad_sym",
    "ft8132q.kicad_mod",
    "ft8132q.glb",
    "ft8132q.step",
    "ft8132q.lbr",
    "docs/hero.png",
    "docs/ft8132q-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ft8132q-hero.glb",
    "ft8132q-hero.overlay.json",
    "ft8132q-etched.glb"
  ],
  "component": {
    "mpn": "FT8132Q",
    "manufacturer": "Fortior Tech",
    "package": "QFN-24(4x4)",
    "pin_count": 25,
    "category": "Power Supply Chip",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/3c3252632ec78a03c72df485b5933891.pdf",
    "parts": {
      "symbol": "ft8132q.kicad_sym",
      "footprint": "ft8132q.kicad_mod",
      "model_3d": "ft8132q-hero.glb",
      "model_3d_plain": "ft8132q-etched.glb",
      "model_3d_step": "ft8132q-etched.step",
      "model_3d_step_plain": "ft8132q.step",
      "lbr": "ft8132q.lbr"
    },
    "distributor_links": {
      "lcsc": "C5126659"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T00:41:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "ASPEED",
        "type": "input",
        "description": "Analog speed-control input, valid over 0 to VDD5 V, active when analog-voltage speed mode is selected."
      },
      {
        "number": "2",
        "name": "DIR",
        "type": "input",
        "description": "Motor direction input with internal pull-up, default high: 0 gives reverse phase sequence U-->W-->V and 1 gives forward U-->V-->W."
      },
      {
        "number": "3",
        "name": "L_U",
        "type": "output",
        "description": "3P3N pre-driver low-side U-phase output with an internal 25kΩ pull-down resistor."
      },
      {
        "number": "4",
        "name": "L_V",
        "type": "output",
        "description": "3P3N pre-driver low-side V-phase output with an internal 25kΩ pull-down resistor."
      },
      {
        "number": "5",
        "name": "L_W",
        "type": "output",
        "description": "3P3N pre-driver low-side W-phase output with an internal 25kΩ pull-down resistor."
      },
      {
        "number": "6",
        "name": "H_PU",
        "type": "output",
        "description": "3P3N pre-driver high-side U-phase output with an internal 50kΩ pull-up resistor."
      },
      {
        "number": "7",
        "name": "H_PV",
        "type": "output",
        "description": "3P3N pre-driver high-side V-phase output with an internal 50kΩ pull-up resistor."
      },
      {
        "number": "8",
        "name": "H_PW",
        "type": "output",
        "description": "3P3N pre-driver high-side W-phase output with an internal 50kΩ pull-up resistor."
      },
      {
        "number": "9",
        "name": "VCC",
        "type": "power_in",
        "description": "Input supply, 6V to 28V DC, with at least a 10μF capacitor to ground."
      },
      {
        "number": "10",
        "name": "FG/RD/SDA",
        "type": "bidirectional",
        "description": "Speed feedback FG output or fault-indication RD output (open-drain), and I2C data line SDA (open-drain) in I2C mode."
      },
      {
        "number": "11",
        "name": "SPEED",
        "type": "input",
        "description": "Motor speed input for PWM or CLOCK speed control, which serves as the SCL clock line in I2C mode."
      },
      {
        "number": "12",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "13",
        "name": "VDD5",
        "type": "power_out",
        "description": "5V LDO output that needs a 1μF to 4.7μF capacitor to ground and is not to be used to power external circuits."
      },
      {
        "number": "14",
        "name": "HBIAS",
        "type": "power_out",
        "description": "Hall bias supply, switched internally from VDD5, with a maximum load capability of 10mA."
      },
      {
        "number": "15",
        "name": "A2M/FAULTN",
        "type": "bidirectional",
        "description": "AMP2 negative input, or open-drain fault-indication output FAULTN when used as the fault pin."
      },
      {
        "number": "16",
        "name": "A2P/HWP",
        "type": "input",
        "description": "AMP2 positive input, or W-phase Hall-sensor positive input."
      },
      {
        "number": "17",
        "name": "EW/HWM",
        "type": "input",
        "description": "W-phase back-EMF divider input, or W-phase Hall-sensor negative input or Hall-IC input."
      },
      {
        "number": "18",
        "name": "EV/HVM",
        "type": "input",
        "description": "V-phase back-EMF divider input, or V-phase Hall-sensor negative input or Hall-IC input."
      },
      {
        "number": "19",
        "name": "A1P/HVP",
        "type": "input",
        "description": "AMP1 positive input, or V-phase Hall-sensor positive input."
      },
      {
        "number": "20",
        "name": "A1M/HUM",
        "type": "input",
        "description": "AMP1 negative input, or U-phase Hall-sensor negative input."
      },
      {
        "number": "21",
        "name": "EU/HUP",
        "type": "input",
        "description": "U-phase back-EMF divider input, or U-phase Hall-sensor positive input or Hall-IC input."
      },
      {
        "number": "22",
        "name": "A0M",
        "type": "input",
        "description": "AMP0 negative input."
      },
      {
        "number": "23",
        "name": "A0P",
        "type": "input",
        "description": "AMP0 positive input."
      },
      {
        "number": "24",
        "name": "ICP",
        "type": "input",
        "description": "Overcurrent-protection input, used for current sampling when ICP overcurrent mode is selected."
      },
      {
        "number": "25",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 10, 15, 21, 17, 18, 16, 19, 20 and 13 are multi-function pins. The datasheet lists them as mult; The datasheet pin-list table for QFN24 is on page 11 and gives the pin numbers and functions. The QF"
        ],
        "pages_sent": 26,
        "cost_usd": 0.0265,
        "at": "2026-10-28T00:40:48"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/3c3252632ec78a03c72df485b5933891.pdf",
        "pages": 26,
        "sha256": "93b3ecc09d8a92eb",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ft8132q.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "096fc110543e6d324c5120c2d38e3dca87a389da9b6fac234f1fe40856295ef4",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ft8132q-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e2a0e8d487f4e6faf5b612f022f7045bc4792c029047c2b7cdf95c8e5043d24a",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}