main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ft24c512a-ttr-t: viewers · Ray
ft24c512a-ttr-t-etched.glb Publish 0.1.0 · Ray
ft24c512a-ttr-t-etched.step ft24c512a-ttr-t: factory component page (tier=lcsc) · Ray
ft24c512a-ttr-t-hero.glb ft24c512a-ttr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
ft24c512a-ttr-t-hero.overlay.json Publish 0.1.0 · Ray
ft24c512a-ttr-t.glb Publish 0.1.0 · Ray
ft24c512a-ttr-t.kicad_mod Publish 0.1.0 · Ray
ft24c512a-ttr-t.kicad_sym Publish 0.1.0 · Ray
ft24c512a-ttr-t.lbr Publish 0.1.0 · Ray
ft24c512a-ttr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

FT24C512A-TTR-T

FMD(Fremont Micro Devices) · EEPROM · TSSOP-8

FT24C512A-TTR-T from FMD(Fremont Micro Devices), in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input that is hardwired to VIH or VIL and is recognized as VIL if left unconnected.
2 A1 input Device address input that is hardwired to VIH or VIL and is recognized as VIL if left unconnected.
3 A2 input Device address input that is hardwired to VIH or VIL and is recognized as VIL if left unconnected.
4 GND power_in Ground reference for the device.
5 SDA bidirectional Bi-directional serial data line with an open-drain output that can be wired-OR with other open-drain devices and is typically pulled high by an external resistor.
6 SCL input Serial clock input where the rising edge latches data into the EEPROM and the falling edge clocks data out.
7 WP input Write protect input that disables all programming when connected to VIH or VCC, while programming is allowed if left unconnected or at VIL; reads are unaffected.
8 VCC power_in Supply voltage of 1.7V to 5.5V, with a decoupling capacitor of no less than 10nF recommended.

Key specifications

Parameter Value
Manufacturer FMD(Fremont Micro Devices)
Package TSSOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1 1.7 5.5 V 11
Supply read current ICC1 0.4 1 mA VCC @ 5.5V SCL = 100 kHz 11
Supply write current ICC2 2 4 mA VCC @ 5.5V SCL = 100 kHz 11
Standby supply current ISB1 1 µA VCC @ 1.7V, VIN = VCC or VSS 11
Input leakage current IIL 3 µA VIN = VCC or VSS 11
Output leakage current ILO 3 µA VIN = VCC or VSS 11
Input low level VIL -0.6 0.3 V max = VCC×0.3 11
Input high level VIH 0.7 0.5 V min = VCC×0.7, max = VCC +0.5 11
Output low level VOL1 0.4 V VCC @ 1.7V, IOL = 0.15 mA 11
Clock frequency, SCL (1.7V) fSCL 400 kHz 1.7V 10
Clock frequency, SCL (2.5-5.5V) fSCL 1000 kHz 2.5-5.5V 10
Clock pulse width low (1.7V) tLOW 1.3 µs 1.7V 10
Clock pulse width low (2.5-5.5V) tLOW 0.6 µs 2.5-5.5V 10
Clock pulse width high (1.7V) tHIGH 0.6 µs 1.7V 10
Clock pulse width high (2.5-5.5V) tHIGH 0.3 µs 2.5-5.5V 10
Noise suppression time (1.7V) tI 100 ns 1.7V 10
Noise suppression time (2.5-5.5V) tI 50 ns 2.5-5.5V 10
Clock low to data out valid (1.7V) tAA 0.9 µs 1.7V 10
Clock low to data out valid (2.5-5.5V) tAA 0.55 µs 2.5-5.5V 10
Bus free time (1.7V) tBUF 1.3 µs 1.7V 10
Bus free time (2.5-5.5V) tBUF 0.5 µs 2.5-5.5V 10
START hold time (1.7V) tHD.STA 0.6 µs 1.7V 10
START hold time (2.5-5.5V) tHD.STA 0.25 µs 2.5-5.5V 10
START set-up time (1.7V) tSU.STA 0.6 µs 1.7V 10
START set-up time (2.5-5.5V) tSU.STA 0.25 µs 2.5-5.5V 10
Data in hold time tHD.DAT 0 µs 1.7V and 2.5-5.5V 10
Data in set-up time tSU.DAT 100 ns 1.7V and 2.5-5.5V 10
Input rise time tR 0.3 µs 1.7V and 2.5-5.5V 10
Input fall time (1.7V) tF 300 ns 1.7V 10
Input fall time (2.5-5.5V) tF 100 ns 2.5-5.5V 10
STOP set-up time (1.7V) tSU.STO 0.6 µs 1.7V 10
STOP set-up time (2.5-5.5V) tSU.STO 0.25 µs 2.5-5.5V 10
Data out hold time tDH 50 ns 1.7V and 2.5-5.5V 10
VCC slew rate at power up tPWR,R 0.1 50 V/ms 1.7V and 2.5-5.5V 10
Time required after VCC stable before commands tPUP 100 µs 1.7V and 2.5-5.5V 10
Minimum time at Vcc=0V between power cycles tPOFF 500 ms 1.7V and 2.5-5.5V 10
Write cycle time tWR 5 ms 1.7V and 2.5-5.5V 10
Endurance 1e+06 Write Cycles 25°C, Page Mode, 3.3V 10
Input voltage on any pin relative to ground -0.3 V max is VCC + 0.3V 2
Maximum voltage 8 V 2
Storage temperature -50 125 °C 2
Industrial operating temperature -40 85 °C 2
ESD protection on all pins 4000 V >4000V 2

CAD (KiCad official)

  • Symbol: FT24C512A-TTR-T
  • Footprint: Package_SO:TSSOP-8_3x3mm_P0.65mm
  • 3D model: TSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ft24c512a-ttr-t-etched.step / ft24c512a-ttr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft24c512a-ttr-t.step / ft24c512a-ttr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FMD(Fremont Micro Devices) datasheet (18 pp, sha256 066bca3721bc527b, retrieved 2026-10-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF