main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ft24c128a-tsr-t: viewers · Ray
ft24c128a-tsr-t-etched.glb Publish 0.1.0 · Ray
ft24c128a-tsr-t-etched.step ft24c128a-tsr-t: factory component page (tier=lcsc) · Ray
ft24c128a-tsr-t-hero.glb ft24c128a-tsr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
ft24c128a-tsr-t-hero.overlay.json Publish 0.1.0 · Ray
ft24c128a-tsr-t.glb Publish 0.1.0 · Ray
ft24c128a-tsr-t.kicad_mod Publish 0.1.0 · Ray
ft24c128a-tsr-t.kicad_sym Publish 0.1.0 · Ray
ft24c128a-tsr-t.lbr Publish 0.1.0 · Ray
ft24c128a-tsr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

FT24C128A-TSR-T

FMD(Fremont Micro Devices) · EEPROM · SOP-8

FT24C128A-TSR-T from FMD(Fremont Micro Devices), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input Device address input hardwired to VIH or VIL to match the device address; if left unconnected it is internally recognized as VIL.
2 A1 input Device address input hardwired to VIH or VIL to match the device address; if left unconnected it is internally recognized as VIL.
3 A2 input Device address input hardwired to VIH or VIL to match the device address; if left unconnected it is internally recognized as VIL.
4 GND power_in Ground reference pin; the datasheet labels it GND in the pin figure but gives no further description.
5 SDA bidirectional Bi-directional serial data line with open-drain output, typically pulled high by an external resistor and wire-OR-able with other open-drain devices; data changes only while SCL is at VIL.
6 SCL input Serial clock input whose rising edge latches data into the EEPROM and falling edge clocks data out; it is a Schmitt-trigger, noise-filtered input.
7 WP input Write protect input: programming is allowed when left unconnected or at VIL and all programming is disabled when connected to VIH or VCC, with read operations unaffected.
8 VCC power_in Supply voltage from 1.7 V to 5.5 V; a decoupling capacitor of no less than 10 nF should be connected to the VCC pad.

Key specifications

Parameter Value
Manufacturer FMD(Fremont Micro Devices)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1 1.7 5.5 V 10
Input low level VIL -0.6 V 10
Input leakage current IIL 3 µA VIN = VCC or VSS 10
Output leakage current ILO 3 µA VIN = VCC or VSS 10
Supply read current ICC1 0.3 1 mA VCC @ 5.5V SCL = 100 kHz 10
Supply write current ICC2 1 3 mA VCC @ 5.5V SCL = 100 kHz 10
Standby supply current ISB1 1 µA VCC @ 1.7V, VIN = VCC or VSS 10
Output low level VOL1 0.4 V VCC @ 1.7V, IOL = 0.15 mA 10
Operating temperature range (industrial) -40 85 °C 2
Storage temperature -50 125 °C 2
Input voltage on any pin relative to ground -0.3 V relative to ground 2
Maximum voltage 8 V 2
ESD protection on all pins 4000 V all pins; printed as >4000V 2
Clock frequency, SCL (1.7V) fSCL 400 kHz VCC 1.7V column 9
Clock frequency, SCL (2.5-5.5V) fSCL 1000 kHz VCC 2.5-5.5V column 9
Clock pulse width low (1.7V) tLOW 1.3 µs VCC 1.7V column 9
Clock pulse width low (2.5-5.5V) tLOW 0.6 µs VCC 2.5-5.5V column 9
Clock pulse width high (1.7V) tHIGH 0.6 µs VCC 1.7V column 9
Clock pulse width high (2.5-5.5V) tHIGH 0.3 µs VCC 2.5-5.5V column 9
Noise suppression time (1.7V) tI 100 ns VCC 1.7V column 9
Noise suppression time (2.5-5.5V) tI 50 ns VCC 2.5-5.5V column 9
Clock low to data out valid (1.7V) tAA 0.9 µs VCC 1.7V column 9
Clock low to data out valid (2.5-5.5V) tAA 0.55 µs VCC 2.5-5.5V column 9
Bus free time before new transmission (1.7V) tBUF 1.3 µs VCC 1.7V column 9
Bus free time before new transmission (2.5-5.5V) tBUF 0.5 µs VCC 2.5-5.5V column 9
START hold time (1.7V) tHD.STA 0.6 µs VCC 1.7V column 9
START hold time (2.5-5.5V) tHD.STA 0.25 µs VCC 2.5-5.5V column 9
START set-up time (1.7V) tSU.STA 0.6 µs VCC 1.7V column 9
START set-up time (2.5-5.5V) tSU.STA 0.25 µs VCC 2.5-5.5V column 9
Data in hold time (1.7V) tHD.DAT 0 ns VCC 1.7V column 9
Data in hold time (2.5-5.5V) tHD.DAT 0 ns VCC 2.5-5.5V column 9
Data in set-up time (1.7V) tSU.DAT 100 ns VCC 1.7V column 9
Data in set-up time (2.5-5.5V) tSU.DAT 100 ns VCC 2.5-5.5V column 9
Input rise time (1.7V) tR 300 ns VCC 1.7V column 9
Input rise time (2.5-5.5V) tR 100 ns VCC 2.5-5.5V column 9
Input fall time (1.7V) tF 300 ns VCC 1.7V column 9
Input fall time (2.5-5.5V) tF 100 ns VCC 2.5-5.5V column 9
STOP set-up time (1.7V) tSU.STO 0.6 µs VCC 1.7V column 9
STOP set-up time (2.5-5.5V) tSU.STO 0.25 µs VCC 2.5-5.5V column 9
Data out hold time (1.7V) tDH 50 ns VCC 1.7V column 9
Data out hold time (2.5-5.5V) tDH 50 ns VCC 2.5-5.5V column 9
VCC slew rate at power up (1.7V) tPWR,R 0.1 50 V/ms VCC 1.7V column 9
VCC slew rate at power up (2.5-5.5V) tPWR,R 0.1 50 V/ms VCC 2.5-5.5V column 9
Time required after VCC stable before device accepts commands (1.7V) tPUP 100 µs VCC 1.7V column 9
Time required after VCC stable before device accepts commands (2.5-5.5V) tPUP 100 µs VCC 2.5-5.5V column 9
Minimum time at VCC=0V between power cycles tPOFF 500 ms 9
Write cycle time tWR 5 ms 9
Endurance 1e+06 Write Cycles 25oC, Page Mode, 3.3V 9

CAD (KiCad official)

  • Symbol: FT24C128A-TSR-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ft24c128a-tsr-t-etched.step / ft24c128a-tsr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft24c128a-tsr-t.step / ft24c128a-tsr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FMD(Fremont Micro Devices) datasheet (18 pp, sha256 36c456866cdf8ed4, retrieved 2026-11-04, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF