main
History Download
Ray Publish 0.1.0 d8bbca6

FT232HPQ-TRAY

FTDI · USB ICs · VQFN-56(8x8)

FT232HPQ-TRAY from FTDI, in a VQFN-56(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EECS bidirectional EEPROM chip select pin, tri-stated during device reset, for the optional external EEPROM that holds the device configuration.
2 EECLK output Clock output to the external EEPROM, tri-stated during device reset and outputting the EEPROM clock when not in reset; pull to VCCIO with a separate 10K resistor if no EEPROM is used.
3 EEDATA bidirectional EEPROM data I/O, which connects to the EEPROM data-in directly and to data-out via a 2.2K resistor, with the data-out pulled to VCC via a 10K resistor for correct operation.
4 TEST input IC test pin that must be connected to GND for normal operation.
5 VCCIO power_in +3.3V I/O interface power supply input; failure to connect all VCCIO pins will result in failure of the device.
6 RESET# input Active-low reset input, with a minimum pulse width of 1.5 ms, and it should be tied to VCCIO (+3.3V) if not used.
7 GPIO0 bidirectional GPIO0 or I2C_SDA pin, with default function of GPIO0 input with weak pull-down.
8 GPIO1 bidirectional GPIO1 or I2C_SCL pin, with default function of GPIO1 input with weak pull-down.
9 GPIO2 bidirectional GPIO2 or I2C_INT# pin, with default function of GPIO2 input with weak pull-down.
10 GPIO3 bidirectional GPIO3 general purpose I/O pin, with default function of GPIO3 input with weak pull-down.
11 VCORE power_in +1.2V core supply voltage input; connect to pin 33 when using the internal regulator per the Table 2 note (VREGOUT to VCORE).
12 GND power_in Ground connection.
13 VCCIO power_in +3.3V I/O interface power supply input.
14 VCCIO power_in +3.3V I/O interface power supply input.
15 OSCI input Oscillator input pin.
16 OSCO output Oscillator output pin.
17 GND power_in Ground connection.
18 VREGIN power_in +3.3V input to the integrated 1.2V voltage regulator.
19 VREGOUT power_out +1.2V output of the integrated regulator, which must connect to VCORE with a 3.3uF filter capacitor and should not power other circuits.
20 FSOURCE power_in FSOURCE input pin for EFUSE, to be left floating for normal operation.
21 VPP power_in VPP input pin for EFUSE, to be left floating for normal operation.
22 VCORE power_in +1.2V core supply voltage input.
23 ADBUS0 bidirectional Configurable ADBUS pin, default function is transmit asynchronous data output (TXD) in UART mode.
24 ADBUS1 bidirectional Configurable ADBUS pin, default function is receive asynchronous data input (RXD) in UART mode.
25 ADBUS2 bidirectional Configurable ADBUS pin, default function is RTS# handshake control output in UART mode.
26 ADBUS3 bidirectional Configurable ADBUS pin, default function is CTS# handshake control input in UART mode.
27 ADBUS4 bidirectional Configurable ADBUS pin, default function is DTR# control output in UART mode.
28 VCCIO power_in +3.3V I/O interface power supply input.
29 ADBUS5 bidirectional Configurable ADBUS pin, default function is DSR# control input in UART mode.
30 ADBUS6 bidirectional Configurable ADBUS pin, default function is DCD# control input in UART mode.
31 ADBUS7 bidirectional Configurable ADBUS pin, default function is RI# control input in UART mode; when remote wake up is enabled in the EEPROM, taking it low can resume the host from suspend.
32 ACBUS0 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
33 ACBUS1 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
34 ACBUS2 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
35 ACBUS3 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
36 VCORE power_in +1.2V core supply voltage input.
37 ACBUS4 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
38 ACBUS5 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
39 ACBUS6 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
40 VCCIO power_in +3.3V I/O interface power supply input.
41 GND power_in Ground connection.
42 ACBUS7 bidirectional Configurable ACBUS I/O pin, default TriSt-PD if no EEPROM is fitted; also the PWRSAV# USB power save input, which can be tied to VCC_USB via a 39K resistor.
43 ACBUS8 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
44 ACBUS9 bidirectional Configurable ACBUS I/O pin whose function is set in the EEPROM; default is TriSt-PU if no EEPROM is fitted.
45 NC unconnected No function is given for this pin in the datasheet text; it is labelled NC on the 56-pin schematic symbol.
46 VCORE power_in +1.2V core supply voltage input.
47 VCC_USB power_in +3.3V input to the internal USB PHY; it cannot be connected directly to the USB supply and needs a +3.3V regulator with LC filtering.
48 DM bidirectional USB Data Signal Minus.
49 DP bidirectional USB Data Signal Plus.
50 REF input Current reference pin, to be connected to GND via a 12K resistor at 1% tolerance.
51 VCC_PD power_in +3.3V input to the internal PD PHY power supply.
52 PD1_CC2 bidirectional Analog I/O for the PD1 CC2 Type-C configuration channel pin.
53 PD1_SVBUS passive Analog input for scaled-down VBUS sensing on PD1; VBUS must be divided by 10 before this pin.
54 PD1_VCONN power_in Power input for the PD1 VCONN power source; connect to 3.3V.
55 PD1_CC1 bidirectional Analog I/O for the PD1 CC1 Type-C configuration channel pin.
56 VCORE power_in +1.2V core supply voltage input.
57 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer FTDI
Package VQFN-56(8x8)
Category Communication Interface Chip/UART/485/232
Pins 57

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 Degrees C 46
Ambient Operating Temperature (Power Applied) -40 85 Degrees C Power applied 46
VCORE Supply Voltage VCORE -0.3 1.32 V 46
VCCIO IO Voltage VCCIO -0.3 4 V 46
DC Input Voltage, USBDP and USBDM -0.5 3.63 V 46
DC Input Voltage, High Impedance Bi-directional (ACBUS and ADBUS powered from VCCIO) -0.3 5.8 V 46
DC Output Current, Outputs 16 mA 46
VCORE VCC Core Operating Supply Voltage VCORE 1.08 1.2 1.32 V 46
VCCIO Operating Supply Voltage VCCIO 2.97 3.3 3.63 V 46
VREGIN Voltage regulator Input VREGIN 3 3.3 3.6 V 46
VREGOUT Voltage regulator Output VREGOUT 1.08 1.2 1.32 V 46
Regulator Current Ireg 22.37 150 mA VREGIN +3.3V and data transfer with 12Mbps 46
VREGIN Suspend Supply Current Icc1s 132.2 µA USB Suspend 46
VCC_USB operating supply current I_vcc_usb 22.36 mA Data transfer with 12Mbps 46
VCC_IO operating supply current I_vccio 1.72 mA Data transfer with 12Mbps 46
VCC_PD suspend supply current I_vcc_pd 23.5 uA PD suspend 46
Output Voltage High Voh 2.4 V Ioh = +/-2mA, I/O Drive strength = 4mA 47
Output Voltage Low Vol 0 0.4 V Iol = +/-2mA, I/O Drive strength = 4mA 47
Input low Switching Threshold Vil 0.8 V LVTTL 47
Input High Switching Threshold Vih 2 V LVTTL 47
Schmitt trigger negative going threshold voltage Vt- 0.8 1.1 V 47
Schmitt trigger positive going threshold voltage Vt+ 1.6 2 V 47
Input pull-up resistance Rpu 40 75 190 KΩ Vin = 0 47
Input pull-down resistance Rpd 40 75 190 KΩ Vin =VCCIO 47
Input Leakage Current Iin -1 1 μA Vin = 5V or 0V 47
PHY Operating Supply Voltage VCC_USB PHY 3 3.3 3.6 V 3.3V I/O 47
PHY Operating Supply Current Iccphy 60 mA Hi-speed operation at 480 MHz 47
PHY Suspend Supply Current Iccphy(susp) 2 mA USB Suspend 47
PHY Output Voltage High Voh 2.8 3.6 V 47
PHY Output Voltage Low Vol 0 0.3 V 47
PHY Input low Switching Threshold Vil 0.8 V 47
PHY Input High Switching Threshold Vih 2 V 47
Human Body Model (HBM) -2 2 kV JEDEC EIA/JESD22-A114-B, Class 2 48
Machine Mode (MM) -200 200 V JEDEC EIA/JESD22-A115-A, Class B 48
Charge Device Model (CDM) -500 500 V JEDEC EIA/JESD22-C101-D, Class-III 48
Latch-up -200 200 mA JESD78, Trigger Class-II 48
Thermal resistance junction to ambient (FT232HPQ) ѲJA 23.65 °C/W 48
Thermal resistance junction to case (FT232HPQ) ѲJC 9.35 °C/W 48

CAD (KiCad official)

  • Symbol: FT232HPQ-TRAY
  • Footprint: Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm
  • 3D model: VQFN-56(8x8) (KiCad packages3D, STEP)
  • 3D model files: ft232hpq-tray-etched.step / ft232hpq-tray-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ft232hpq-tray.step / ft232hpq-tray.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FTDI datasheet (58 pp, sha256 7b97ec4256ec2c92, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF