component
FSV4825-A10-CS
Public Made by Adomby adom
Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.1
7c559e7
FSV4825-A10-CS
Forsinve · RF Transceiver ICs · SOP-16
FSV4825-A10-CS from Forsinve, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LAN_EN | input | Selects wideband or narrowband mode (宽带/窄带模式选择 in the datasheet pin table). |
| 2 | TUNE1 | passive | Band and frequency tuning reference voltage node; the resistor divider network between BAND and TUNE1 selects the band, and the potentiometer between TUNE1 and TUNE2 tunes the channel. |
| 3 | TUNE2 | input | Frequency (channel) selection input, used with the potentiometer connected between TUNE1 and TUNE2. |
| 4 | BAND | input | Band selection input, connected through the resistor divider network to TUNE1. |
| 5 | NC | unconnected | No connection (空脚). |
| 6 | FMIN | input | FM (broadcast) RF signal input. |
| 7 | RFGND | power_in | RF ground (射频接地). |
| 8 | AMIN | input | AM RF signal input. |
| 9 | PWD | input | Power reset pin (电源复位脚); the pin diagram on page 9 labels this pin RESET. |
| 10 | GND | power_in | Ground (接地). |
| 11 | GND | power_in | Ground (接地). |
| 12 | XO | output | Crystal oscillator circuit output. |
| 13 | XI | input | Crystal oscillator circuit input. |
| 14 | VDD | power_in | Power supply input; operating supply range is 2.0 to 3.6 V per the electrical characteristics. |
| 15 | AGND | power_in | Audio/power ground (音频/电源地); the pin diagram on page 9 labels this pin GND. |
| 16 | AOUT | output | Audio output (音频输出). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Forsinve |
| Package | SOP-16 |
| Category | RF And Wireless |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (Supply voltage) | VDD | 2 | 3.6 | V | 6 | ||
| 上电上升时间 (Power-up rise time) | VDDRSIE | 10 | mS | 6 | |||
| 环境温度 (Ambient temperature) | TA | -25 | 25 | 85 | °C | 6 | |
| 频率范围 (FM frequency range) | 63 | 109 | MHz | 7 | |||
| AM抑制 (AM suppression) | 40 | 55 | dB | 7 | |||
| 相邻信道选择性 (Adjacent channel selectivity) | 40 | 50 | dB | ±200 kHz | 7 | ||
| 间隔信道选择性 (Alternate channel selectivity) | 50 | 60 | dB | ±400 kHz | 7 | ||
| 音频立体声分离度 (Audio stereo separation) | 30 | dB | 7 | ||||
| 音频频率响应(LOW) (Audio frequency response, low) | 30 | Hz | -3dB | 7 | |||
| 音频输出负载电阻 (Audio output load resistance) | 10 | k | Single-ended | 7 | |||
| 去加重时间常数 (De-emphasis time constant) | 50 | 75 | ms | 7 | |||
| 中波(MW)输入频率 (MW input frequency) | 504 | 1750 | kHz | 8 | |||
| 短波(SW)输入频率 (SW input frequency) | 2.2 | 28.5 | MHz | 8 | |||
| 电源纹波抑制比 (Power supply ripple rejection) | 40 | dB | 8 | ||||
| 音频信噪比 (AM audio SNR) | 54 | dB | 8 | ||||
| AM电感量 (AM antenna inductance) | 180 | 450 | uH | 8 | |||
| 关机静态电流 (Power-down quiescent current) | IPWD | 10 | uA | 6 | |||
| 工作电流(FM模式) (Operating current, FM mode) | IFM | 19 | mA | 6 | |||
| 工作电流(AM模式) (Operating current, AM mode) | IAM | 18 | mA | 6 | |||
| 工作电流(SW模式) (Operating current, SW mode) | ISW | 18 | mA | 6 | |||
| 实用灵敏度 (Practical sensitivity, FM) | 3 | uV EMF | (S+N)/N = 26 dB | 7 | |||
| LNA输入阻抗 (LNA input impedance) | 4 | k | 7 | ||||
| LNA输入电容 (LNA input capacitance) | 5 | pF | 7 | ||||
| 音频输出电压 (FM audio output voltage) | 100 | mVRMS | 7 | ||||
| 音频信噪比 (FM audio SNR) | 52 | dB | 7 | ||||
| 音频总谐波失真 (FM audio THD) | 0.1 | 0.3 | % | 7 | |||
| 输入IP3 (Input IP3) | 105 | dBuV EMF | 7 | ||||
| 音频频率响应(High) (Audio frequency response, high) | 15 | kHz | -3dB | 7 | |||
| 灵敏度 (AM/SW sensitivity) | 20 | mV EMF | (S+N)/N = 20dB | 8 | |||
| 音频输出电压 (AM/SW audio output voltage) | 100 | mVRMS | 8 | ||||
| 音频总谐波失真 (AM/SW audio THD) | 0.3 | % | 8 |
CAD (KiCad official)
- Symbol:
FSV4825-A10-CS - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
fsv4825-a10-cs-etched.step/fsv4825-a10-cs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fsv4825-a10-cs.step/fsv4825-a10-cs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Forsinve datasheet (12 pp, sha256
6de6900877336ba5, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FSV4825-A10-CS
**Forsinve** · RF Transceiver ICs · SOP-16
FSV4825-A10-CS from Forsinve, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LAN_EN | input | Selects wideband or narrowband mode (宽带/窄带模式选择 in the datasheet pin table). |
| 2 | TUNE1 | passive | Band and frequency tuning reference voltage node; the resistor divider network between BAND and TUNE1 selects the band, and the potentiometer between TUNE1 and TUNE2 tunes the channel. |
| 3 | TUNE2 | input | Frequency (channel) selection input, used with the potentiometer connected between TUNE1 and TUNE2. |
| 4 | BAND | input | Band selection input, connected through the resistor divider network to TUNE1. |
| 5 | NC | unconnected | No connection (空脚). |
| 6 | FMIN | input | FM (broadcast) RF signal input. |
| 7 | RFGND | power_in | RF ground (射频接地). |
| 8 | AMIN | input | AM RF signal input. |
| 9 | PWD | input | Power reset pin (电源复位脚); the pin diagram on page 9 labels this pin RESET. |
| 10 | GND | power_in | Ground (接地). |
| 11 | GND | power_in | Ground (接地). |
| 12 | XO | output | Crystal oscillator circuit output. |
| 13 | XI | input | Crystal oscillator circuit input. |
| 14 | VDD | power_in | Power supply input; operating supply range is 2.0 to 3.6 V per the electrical characteristics. |
| 15 | AGND | power_in | Audio/power ground (音频/电源地); the pin diagram on page 9 labels this pin GND. |
| 16 | AOUT | output | Audio output (音频输出). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Forsinve |
| Package | SOP-16 |
| Category | RF And Wireless |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 供电电压 (Supply voltage) | VDD | 2 | | 3.6 | V | | 6 |
| 上电上升时间 (Power-up rise time) | VDDRSIE | 10 | | | mS | | 6 |
| 环境温度 (Ambient temperature) | TA | -25 | 25 | 85 | °C | | 6 |
| 频率范围 (FM frequency range) | | 63 | | 109 | MHz | | 7 |
| AM抑制 (AM suppression) | | 40 | 55 | | dB | | 7 |
| 相邻信道选择性 (Adjacent channel selectivity) | | 40 | 50 | | dB | ±200 kHz | 7 |
| 间隔信道选择性 (Alternate channel selectivity) | | 50 | 60 | | dB | ±400 kHz | 7 |
| 音频立体声分离度 (Audio stereo separation) | | 30 | | | dB | | 7 |
| 音频频率响应(LOW) (Audio frequency response, low) | | | | 30 | Hz | -3dB | 7 |
| 音频输出负载电阻 (Audio output load resistance) | | 10 | | | k | Single-ended | 7 |
| 去加重时间常数 (De-emphasis time constant) | | 50 | 75 | | ms | | 7 |
| 中波(MW)输入频率 (MW input frequency) | | 504 | | 1750 | kHz | | 8 |
| 短波(SW)输入频率 (SW input frequency) | | 2.2 | | 28.5 | MHz | | 8 |
| 电源纹波抑制比 (Power supply ripple rejection) | | 40 | | | dB | | 8 |
| 音频信噪比 (AM audio SNR) | | 54 | | | dB | | 8 |
| AM电感量 (AM antenna inductance) | | 180 | | 450 | uH | | 8 |
| 关机静态电流 (Power-down quiescent current) | IPWD | | 10 | | uA | | 6 |
| 工作电流(FM模式) (Operating current, FM mode) | IFM | | 19 | | mA | | 6 |
| 工作电流(AM模式) (Operating current, AM mode) | IAM | | 18 | | mA | | 6 |
| 工作电流(SW模式) (Operating current, SW mode) | ISW | | 18 | | mA | | 6 |
| 实用灵敏度 (Practical sensitivity, FM) | | | 3 | | uV EMF | (S+N)/N = 26 dB | 7 |
| LNA输入阻抗 (LNA input impedance) | | | 4 | | k | | 7 |
| LNA输入电容 (LNA input capacitance) | | | 5 | | pF | | 7 |
| 音频输出电压 (FM audio output voltage) | | | 100 | | mVRMS | | 7 |
| 音频信噪比 (FM audio SNR) | | | 52 | | dB | | 7 |
| 音频总谐波失真 (FM audio THD) | | | 0.1 | 0.3 | % | | 7 |
| 输入IP3 (Input IP3) | | | 105 | | dBuV EMF | | 7 |
| 音频频率响应(High) (Audio frequency response, high) | | | 15 | | kHz | -3dB | 7 |
| 灵敏度 (AM/SW sensitivity) | | | 20 | | mV EMF | (S+N)/N = 20dB | 8 |
| 音频输出电压 (AM/SW audio output voltage) | | | 100 | | mVRMS | | 8 |
| 音频总谐波失真 (AM/SW audio THD) | | | 0.3 | | % | | 8 |
## CAD (KiCad official)
- Symbol: `FSV4825-A10-CS`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `fsv4825-a10-cs-etched.step` / `fsv4825-a10-cs-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fsv4825-a10-cs.step` / `fsv4825-a10-cs.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Forsinve datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602964847667654656) (12 pp, sha256 `6de6900877336ba5`, retrieved 2026-11-11, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fsv4825-a10-cs-datasheet.pdf)