← Commit history
README.md+46−44
@@ -8,22 +8,22 @@ FSV4825-A10-CS from Forsinve, in a SOP-16. Pinout and pin descriptions extracted  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | LAN_EN | input | Selects wideband or narrowband mode (宽带/窄带模式选择) for the band definition tables. |-| 2 | TUNE1 | passive | Band and frequency tuning reference voltage node; the band-select divider resistor network connects between BAND and TUNE1, and the tuning potentiometer connects between TUNE1 and TUNE2. |-| 3 | TUNE2 | input | Frequency selection input, connected through the tuning potentiometer to TUNE1. |-| 4 | BAND | input | Band selection input, connected through the divider resistor network to TUNE1. |-| 5 | NC | unconnected | Empty (no-connect) pin. |-| 6 | FMIN | input | FM signal input (63-109 MHz FM band). |-| 7 | RFGND | power_in | RF ground. |-| 8 | AMIN | input | AM signal input (504-1750 kHz medium wave and 2.2-28.5 MHz short wave). |-| 9 | PWD | input | Power reset pin (电源复位脚); the package diagram on the same datasheet labels this pin RESET. |-| 10 | GND | power_in | Ground. |-| 11 | GND | power_in | Ground. |+| 1 | LAN_EN | input | Selects wideband or narrowband mode (宽带/窄带模式选择 in the datasheet pin table). |+| 2 | TUNE1 | passive | Band and frequency tuning reference voltage node; the resistor divider network between BAND and TUNE1 selects the band, and the potentiometer between TUNE1 and TUNE2 tunes the channel. |+| 3 | TUNE2 | input | Frequency (channel) selection input, used with the potentiometer connected between TUNE1 and TUNE2. |+| 4 | BAND | input | Band selection input, connected through the resistor divider network to TUNE1. |+| 5 | NC | unconnected | No connection (空脚). |+| 6 | FMIN | input | FM (broadcast) RF signal input. |+| 7 | RFGND | power_in | RF ground (射频接地). |+| 8 | AMIN | input | AM RF signal input. |+| 9 | PWD | input | Power reset pin (电源复位脚); the pin diagram on page 9 labels this pin RESET. |+| 10 | GND | power_in | Ground (接地). |+| 11 | GND | power_in | Ground (接地). | | 12 | XO | output | Crystal oscillator circuit output. | | 13 | XI | input | Crystal oscillator circuit input. |-| 14 | VDD | power_in | Power supply input; the datasheet specifies an operating supply of 2.0 to 3.6 V. |-| 15 | AGND | power_in | Audio/power ground (the package diagram labels this pin GND). |-| 16 | AOUT | output | Audio output. |+| 14 | VDD | power_in | Power supply input; operating supply range is 2.0 to 3.6 V per the electrical characteristics. |+| 15 | AGND | power_in | Audio/power ground (音频/电源地); the pin diagram on page 9 labels this pin GND. |+| 16 | AOUT | output | Audio output (音频输出). |  ## Key specifications @@ -40,35 +40,37 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage | VDD | 2 |  | 3.6 | V |  | 6 |-| Ambient temperature | TA | -25 | 25 | 85 | °C |  | 6 |-| Power-up rise time | VDDRSIE | 10 |  |  | mS |  | 6 |-| Frequency range (FM) |  | 63 |  | 109 | MHz |  | 7 |-| AM rejection |  | 40 | 55 |  | dB |  | 7 |-| Adjacent channel selectivity |  | 40 | 50 |  | dB | ±200 kHz | 7 |-| Alternate channel selectivity |  | 50 | 60 |  | dB | ±400 kHz | 7 |-| Stereo separation |  | 30 |  |  | dB |  | 7 |-| Audio total harmonic distortion |  |  | 0.1 | 0.3 | % |  | 7 |-| Audio frequency response LOW |  |  |  | 30 | Hz | -3dB | 7 |-| Audio output load resistance |  | 10 |  |  | k | Single-ended | 7 |-| Input frequency MW band |  | 504 |  | 1750 | kHz | 中波(MW) | 8 |-| Input frequency SW band |  | 2.2 |  | 28.5 | MHz | 短波(SW) | 8 |-| Power supply ripple rejection (AM/SW) |  | 40 |  |  | dB |  | 8 |-| Signal-to-noise ratio (AM/SW audio) |  | 54 |  |  | dB |  | 8 |-| AM inductance |  | 180 |  | 450 | uH |  | 8 |-| Operating current (FM mode) | IFM |  | 19 |  | mA |  | 6 |-| Operating current (AM mode) | IAM |  | 18 |  | mA |  | 6 |-| Operating current (SW mode) | Isw |  | 18 |  | mA |  | 6 |-| Power-down quiescent current | IPWD |  | 10 |  | uA |  | 6 |-| Practical sensitivity (FM) |  |  | 3 |  | uV EMF | (S+N)/N = 26 dB | 7 |-| LNA input capacitance |  |  | 5 |  | pF |  | 7 |-| Audio output voltage (FM) |  |  | 100 |  | mVRMS |  | 7 |-| Audio signal-to-noise ratio (FM) |  |  | 52 |  | dB |  | 7 |-| Input IP3 (FM) |  |  | 105 |  | dBuV EMF |  | 7 |-| Audio frequency response HIGH |  |  | 15 |  | kHz | -3dB | 7 |-| Sensitivity (AM/SW) |  |  | 20 |  | mV EMF | (S+N)/N = 20dB | 8 |-| Audio output voltage (AM/SW) |  |  | 100 |  | mVRMS |  | 8 |-| Audio total harmonic distortion (AM/SW) |  |  | 0.3 |  | % |  | 8 |+| 供电电压 (Supply voltage) | VDD | 2 |  | 3.6 | V |  | 6 |+| 上电上升时间 (Power-up rise time) | VDDRSIE | 10 |  |  | mS |  | 6 |+| 环境温度 (Ambient temperature) | TA | -25 | 25 | 85 | °C |  | 6 |+| 频率范围 (FM frequency range) |  | 63 |  | 109 | MHz |  | 7 |+| AM抑制 (AM suppression) |  | 40 | 55 |  | dB |  | 7 |+| 相邻信道选择性 (Adjacent channel selectivity) |  | 40 | 50 |  | dB | ±200 kHz | 7 |+| 间隔信道选择性 (Alternate channel selectivity) |  | 50 | 60 |  | dB | ±400 kHz | 7 |+| 音频立体声分离度 (Audio stereo separation) |  | 30 |  |  | dB |  | 7 |+| 音频频率响应(LOW) (Audio frequency response, low) |  |  |  | 30 | Hz | -3dB | 7 |+| 音频输出负载电阻 (Audio output load resistance) |  | 10 |  |  | k | Single-ended | 7 |+| 去加重时间常数 (De-emphasis time constant) |  | 50 | 75 |  | ms |  | 7 |+| 中波(MW)输入频率 (MW input frequency) |  | 504 |  | 1750 | kHz |  | 8 |+| 短波(SW)输入频率 (SW input frequency) |  | 2.2 |  | 28.5 | MHz |  | 8 |+| 电源纹波抑制比 (Power supply ripple rejection) |  | 40 |  |  | dB |  | 8 |+| 音频信噪比 (AM audio SNR) |  | 54 |  |  | dB |  | 8 |+| AM电感量 (AM antenna inductance) |  | 180 |  | 450 | uH |  | 8 |+| 关机静态电流 (Power-down quiescent current) | IPWD |  | 10 |  | uA |  | 6 |+| 工作电流(FM模式) (Operating current, FM mode) | IFM |  | 19 |  | mA |  | 6 |+| 工作电流(AM模式) (Operating current, AM mode) | IAM |  | 18 |  | mA |  | 6 |+| 工作电流(SW模式) (Operating current, SW mode) | ISW |  | 18 |  | mA |  | 6 |+| 实用灵敏度 (Practical sensitivity, FM) |  |  | 3 |  | uV EMF | (S+N)/N = 26 dB | 7 |+| LNA输入阻抗 (LNA input impedance) |  |  | 4 |  | k |  | 7 |+| LNA输入电容 (LNA input capacitance) |  |  | 5 |  | pF |  | 7 |+| 音频输出电压 (FM audio output voltage) |  |  | 100 |  | mVRMS |  | 7 |+| 音频信噪比 (FM audio SNR) |  |  | 52 |  | dB |  | 7 |+| 音频总谐波失真 (FM audio THD) |  |  | 0.1 | 0.3 | % |  | 7 |+| 输入IP3 (Input IP3) |  |  | 105 |  | dBuV EMF |  | 7 |+| 音频频率响应(High) (Audio frequency response, high) |  |  | 15 |  | kHz | -3dB | 7 |+| 灵敏度 (AM/SW sensitivity) |  |  | 20 |  | mV EMF | (S+N)/N = 20dB | 8 |+| 音频输出电压 (AM/SW audio output voltage) |  |  | 100 |  | mVRMS |  | 8 |+| 音频总谐波失真 (AM/SW audio THD) |  |  | 0.3 |  | % |  | 8 |  ## CAD (KiCad official) @@ -81,7 +83,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Forsinve datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602964847667654656) (12 pp, sha256 `6de6900877336ba5`, retrieved 2026-11-10, tier: lcsc)+- **Datasheet:** [Forsinve datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602964847667654656) (12 pp, sha256 `6de6900877336ba5`, retrieved 2026-11-11, tier: lcsc) - **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original. - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).
fsv4825-a10-cs-hero.overlay.json+436−434
@@ -1,436 +1,438 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "FSV4825-A10-CS",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 16,-      "span_mm": 9.49,-      "dash_mm": 0.2372,-      "gap_mm": 0.1424,-      "pad_stroke_mm": 0.0569-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 16,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.759,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.0,-      3.0,-      -4.65,-      4.65-    ],-    "pads_bbox_mm": [-      -3.45,-      3.45,-      -4.745,-      4.745-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "fsv4825-a10-cs-etched.glb",-    "glb_sha256": "fc9217f5ea5f44e08db23d30a5c19a8ff2e60e6b50b2277c6bfe3c26b6a65b3c",-    "footprint": "fsv4825-a10-cs.kicad_mod",-    "footprint_sha256": "f9b5075740f7816c540ae1137f025d659beaec522ed7b86b1a5274cc9a2d8a25",-    "pins": "page.json component.pins",-    "pins_sha256": "306cea723acfb9f33b23dcea8f250c68e22150c463d8bd6aad56013990c771cb"-  },-  "generator": "adom-wiki 1.8.15 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "LAN_EN",-      "x": -3.6,-      "y": -4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "2",-      "text": "TUNE1",-      "x": -3.6,-      "y": -3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "3",-      "text": "TUNE2",-      "x": -3.6,-      "y": -1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "4",-      "text": "BAND",-      "x": -3.6,-      "y": -0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "5",-      "text": "NC",-      "x": -3.6,-      "y": 0.635,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "6",-      "text": "FMIN",-      "x": -3.6,-      "y": 1.905,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "7",-      "text": "RFGND",-      "x": -3.6,-      "y": 3.175,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "8",-      "text": "AMIN",-      "x": -3.6,-      "y": 4.445,-      "align": "right",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "9",-      "text": "PWD",-      "x": 3.6,-      "y": 4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "10",-      "text": "GND",-      "x": 3.6,-      "y": 3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "11",-      "text": "GND",-      "x": 3.6,-      "y": 1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "12",-      "text": "XO",-      "x": 3.6,-      "y": 0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "13",-      "text": "XI",-      "x": 3.6,-      "y": -0.635,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "14",-      "text": "VDD",-      "x": 3.6,-      "y": -1.905,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "15",-      "text": "AGND",-      "x": 3.6,-      "y": -3.175,-      "align": "left",-      "vertical": false,-      "h": 0.6-    },-    {-      "pad": "16",-      "text": "AOUT",-      "x": 3.6,-      "y": -4.445,-      "align": "left",-      "vertical": false,-      "h": 0.6-    }+ "spec": "adom-hero 1.4",+ "mpn": "FSV4825-A10-CS",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 16,+   "span_mm": 9.49,+   "dash_mm": 0.2373,+   "gap_mm": 0.1424,+   "pad_stroke_mm": 0.0569+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 16,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.759,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.0,+   3.0,+   -4.65,+   4.65+  ],+  "pads_bbox_mm": [+   -3.45,+   3.45,+   -4.745,+   4.745   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -2.475,-        4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -0.635-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -1.905-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -3.175-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        2.475,-        -4.445-      ],-      "size_mm": [-        1.95,-        0.6-      ],-      "rot": 0.0-    }-  ]-}+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "fsv4825-a10-cs-etched.glb",+  "glb_sha256": "fc9217f5ea5f44e08db23d30a5c19a8ff2e60e6b50b2277c6bfe3c26b6a65b3c",+  "footprint": "fsv4825-a10-cs.kicad_mod",+  "footprint_sha256": "f9b5075740f7816c540ae1137f025d659beaec522ed7b86b1a5274cc9a2d8a25",+  "pins": "page.json component.pins",+  "pins_sha256": "306cea723acfb9f33b23dcea8f250c68e22150c463d8bd6aad56013990c771cb"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "LAN_EN",+   "x": -3.6,+   "y": -4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "TUNE1",+   "x": -3.6,+   "y": -3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "TUNE2",+   "x": -3.6,+   "y": -1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "BAND",+   "x": -3.6,+   "y": -0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "NC",+   "x": -3.6,+   "y": 0.635,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "FMIN",+   "x": -3.6,+   "y": 1.905,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "RFGND",+   "x": -3.6,+   "y": 3.175,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "AMIN",+   "x": -3.6,+   "y": 4.445,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "9",+   "text": "PWD",+   "x": 3.6,+   "y": 4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "10",+   "text": "GND",+   "x": 3.6,+   "y": 3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "11",+   "text": "GND",+   "x": 3.6,+   "y": 1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "12",+   "text": "XO",+   "x": 3.6,+   "y": 0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "13",+   "text": "XI",+   "x": 3.6,+   "y": -0.635,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "14",+   "text": "VDD",+   "x": 3.6,+   "y": -1.905,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "15",+   "text": "AGND",+   "x": 3.6,+   "y": -3.175,+   "align": "left",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "16",+   "text": "AOUT",+   "x": 3.6,+   "y": -4.445,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -2.475,+    4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -0.635+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -1.905+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -3.175+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    2.475,+    -4.445+   ],+   "size_mm": [+    1.95,+    0.6+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
fsv4825-a10-cs.lbr+12−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet</description> <packages> <package name="SOIC-16_3.9x9.9mm_P1.27mm">   <description>SOIC-16, 3.9 x 9.9 mm, 1.27 mm pitch</description>@@ -94,6 +94,7 @@ </packages> <symbols> <symbol name="FSV4825-A10-CS">+  <description>Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet</description>   <wire x1="-12.7" y1="10.16" x2="12.7" y2="10.16" width="0.254" layer="94"/>   <wire x1="12.7" y1="10.16" x2="12.7" y2="-12.7" width="0.254" layer="94"/>   <wire x1="12.7" y1="-12.7" x2="-12.7" y2="-12.7" width="0.254" layer="94"/>@@ -120,7 +121,7 @@ </symbols> <devicesets> <deviceset name="FSV4825-A10-CS" prefix="U">-  <description></description>+  <description>Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet</description>   <gates>     <gate name="G$1" symbol="FSV4825-A10-CS" x="0" y="0"/>   </gates>@@ -144,7 +145,15 @@         <connect gate="G$1" pin="GND@2" pad="10"/>         <connect gate="G$1" pin="PWD" pad="9"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="FSV4825-A10-CS" constant="no"/>+          <attribute name="MANUFACTURER" value="Forsinve" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602964847667654656" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/fsv4825-a10-cs" constant="no"/>+          <attribute name="LCSC_PN" value="C19191932" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
package.json+22−22
@@ -1,6 +1,6 @@ {   "slug": "fsv4825-a10-cs",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -52,7 +52,7 @@       "lcsc": "C19191932"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:13:46Z",+      "checked_at": "2026-11-11T01:26:01Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -68,67 +68,67 @@         "number": "1",         "name": "LAN_EN",         "type": "input",-        "description": "Selects wideband or narrowband mode (宽带/窄带模式选择) for the band definition tables."+        "description": "Selects wideband or narrowband mode (宽带/窄带模式选择 in the datasheet pin table)."       },       {         "number": "2",         "name": "TUNE1",         "type": "passive",-        "description": "Band and frequency tuning reference voltage node; the band-select divider resistor network connects between BAND and TUNE1, and the tuning potentiometer connects between TUNE1 and TUNE2."+        "description": "Band and frequency tuning reference voltage node; the resistor divider network between BAND and TUNE1 selects the band, and the potentiometer between TUNE1 and TUNE2 tunes the channel."       },       {         "number": "3",         "name": "TUNE2",         "type": "input",-        "description": "Frequency selection input, connected through the tuning potentiometer to TUNE1."+        "description": "Frequency (channel) selection input, used with the potentiometer connected between TUNE1 and TUNE2."       },       {         "number": "4",         "name": "BAND",         "type": "input",-        "description": "Band selection input, connected through the divider resistor network to TUNE1."+        "description": "Band selection input, connected through the resistor divider network to TUNE1."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "Empty (no-connect) pin."+        "description": "No connection (空脚)."       },       {         "number": "6",         "name": "FMIN",         "type": "input",-        "description": "FM signal input (63-109 MHz FM band)."+        "description": "FM (broadcast) RF signal input."       },       {         "number": "7",         "name": "RFGND",         "type": "power_in",-        "description": "RF ground."+        "description": "RF ground (射频接地)."       },       {         "number": "8",         "name": "AMIN",         "type": "input",-        "description": "AM signal input (504-1750 kHz medium wave and 2.2-28.5 MHz short wave)."+        "description": "AM RF signal input."       },       {         "number": "9",         "name": "PWD",         "type": "input",-        "description": "Power reset pin (电源复位脚); the package diagram on the same datasheet labels this pin RESET."+        "description": "Power reset pin (电源复位脚); the pin diagram on page 9 labels this pin RESET."       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Ground."+        "description": "Ground (接地)."       },       {         "number": "11",         "name": "GND",         "type": "power_in",-        "description": "Ground."+        "description": "Ground (接地)."       },       {         "number": "12",@@ -146,19 +146,19 @@         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Power supply input; the datasheet specifies an operating supply of 2.0 to 3.6 V."+        "description": "Power supply input; operating supply range is 2.0 to 3.6 V per the electrical characteristics."       },       {         "number": "15",         "name": "AGND",         "type": "power_in",-        "description": "Audio/power ground (the package diagram labels this pin GND)."+        "description": "Audio/power ground (音频/电源地); the pin diagram on page 9 labels this pin GND."       },       {         "number": "16",         "name": "AOUT",         "type": "output",-        "description": "Audio output."+        "description": "Audio output (音频输出)."       }     ],     "provenance": {@@ -172,11 +172,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin 9 is named PWD in the pin description table (page 10) but RESET in the package pin diagram (page; Pin 15 is named AGND in the pin table but GND in the package diagram. The table name is used here.; The datasheet gives no electrical direction for these pins, so the KiCad types (input, passive) are "+          "extractor flagged: Pin 9 is named PWD in the pin description table (page 10) but RESET in the pin diagram (page 9). The; Pin 15 is named AGND in the pin description table (page 10) but GND in the pin diagram (page 9). The; Operating temperature differs: the electrical table gives TA -25 to 85 °C, while the ordering guide "         ],         "pages_sent": 12,-        "cost_usd": 0.0359,-        "at": "2026-11-10T07:13:29"+        "cost_usd": 0.0366,+        "at": "2026-11-11T01:25:45"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602964847667654656",@@ -213,7 +213,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -231,8 +231,8 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "5edae754135cb940360c7bcb42ffe6deb338227400b197eea6907980fa63377b",-        "checked": "2026-11-10",+        "sha256": "96431270c458f80592c90acbd19841a70266614a887f44901062c1ddfb4e05cc",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+25−23
@@ -4,7 +4,7 @@   "slug": "fsv4825-a10-cs",   "title": "FSV4825-A10-CS",   "brief": "Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -34,7 +34,7 @@       "lcsc": "C19191932"     },     "distributor_check": {-      "checked_at": "2026-11-10T07:13:46Z",+      "checked_at": "2026-11-11T01:26:01Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": null,@@ -50,67 +50,67 @@         "number": "1",         "name": "LAN_EN",         "type": "input",-        "description": "Selects wideband or narrowband mode (宽带/窄带模式选择) for the band definition tables."+        "description": "Selects wideband or narrowband mode (宽带/窄带模式选择 in the datasheet pin table)."       },       {         "number": "2",         "name": "TUNE1",         "type": "passive",-        "description": "Band and frequency tuning reference voltage node; the band-select divider resistor network connects between BAND and TUNE1, and the tuning potentiometer connects between TUNE1 and TUNE2."+        "description": "Band and frequency tuning reference voltage node; the resistor divider network between BAND and TUNE1 selects the band, and the potentiometer between TUNE1 and TUNE2 tunes the channel."       },       {         "number": "3",         "name": "TUNE2",         "type": "input",-        "description": "Frequency selection input, connected through the tuning potentiometer to TUNE1."+        "description": "Frequency (channel) selection input, used with the potentiometer connected between TUNE1 and TUNE2."       },       {         "number": "4",         "name": "BAND",         "type": "input",-        "description": "Band selection input, connected through the divider resistor network to TUNE1."+        "description": "Band selection input, connected through the resistor divider network to TUNE1."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "Empty (no-connect) pin."+        "description": "No connection (空脚)."       },       {         "number": "6",         "name": "FMIN",         "type": "input",-        "description": "FM signal input (63-109 MHz FM band)."+        "description": "FM (broadcast) RF signal input."       },       {         "number": "7",         "name": "RFGND",         "type": "power_in",-        "description": "RF ground."+        "description": "RF ground (射频接地)."       },       {         "number": "8",         "name": "AMIN",         "type": "input",-        "description": "AM signal input (504-1750 kHz medium wave and 2.2-28.5 MHz short wave)."+        "description": "AM RF signal input."       },       {         "number": "9",         "name": "PWD",         "type": "input",-        "description": "Power reset pin (电源复位脚); the package diagram on the same datasheet labels this pin RESET."+        "description": "Power reset pin (电源复位脚); the pin diagram on page 9 labels this pin RESET."       },       {         "number": "10",         "name": "GND",         "type": "power_in",-        "description": "Ground."+        "description": "Ground (接地)."       },       {         "number": "11",         "name": "GND",         "type": "power_in",-        "description": "Ground."+        "description": "Ground (接地)."       },       {         "number": "12",@@ -128,19 +128,19 @@         "number": "14",         "name": "VDD",         "type": "power_in",-        "description": "Power supply input; the datasheet specifies an operating supply of 2.0 to 3.6 V."+        "description": "Power supply input; operating supply range is 2.0 to 3.6 V per the electrical characteristics."       },       {         "number": "15",         "name": "AGND",         "type": "power_in",-        "description": "Audio/power ground (the package diagram labels this pin GND)."+        "description": "Audio/power ground (音频/电源地); the pin diagram on page 9 labels this pin GND."       },       {         "number": "16",         "name": "AOUT",         "type": "output",-        "description": "Audio output."+        "description": "Audio output (音频输出)."       }     ],     "provenance": {@@ -154,11 +154,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin 9 is named PWD in the pin description table (page 10) but RESET in the package pin diagram (page; Pin 15 is named AGND in the pin table but GND in the package diagram. The table name is used here.; The datasheet gives no electrical direction for these pins, so the KiCad types (input, passive) are "+          "extractor flagged: Pin 9 is named PWD in the pin description table (page 10) but RESET in the pin diagram (page 9). The; Pin 15 is named AGND in the pin description table (page 10) but GND in the pin diagram (page 9). The; Operating temperature differs: the electrical table gives TA -25 to 85 °C, while the ordering guide "         ],         "pages_sent": 12,-        "cost_usd": 0.0359,-        "at": "2026-11-10T07:13:29"+        "cost_usd": 0.0366,+        "at": "2026-11-11T01:25:45"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602964847667654656",@@ -195,7 +195,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",-        "checked": "2026-11-10",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -213,8 +213,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "5edae754135cb940360c7bcb42ffe6deb338227400b197eea6907980fa63377b",-        "checked": "2026-11-10",+        "sha256": "96431270c458f80592c90acbd19841a70266614a887f44901062c1ddfb4e05cc",+        "checked": "2026-11-11",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -669,5 +669,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Forsinve RF Transceiver ICs, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file