component
FP7195XR-G1
Public Made by Adomby adom
Feeling Tech LED Drivers, ESOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FP7195XR-G1
Feeling Tech · LED Drivers · ESOP-8
FP7195XR-G1 from Feeling Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HVDD | power_in | Power supply pin and positive current sense input, operating from 6.5 V to 80 V with an absolute maximum of -0.3 V to 85 V to GND. |
| 2 | CS | input | Negative current sense input, with an absolute maximum range of HVDD-1.5 V to HVDD V. |
| 3 | COMP | input | Compensation pin where a resistor and capacitor are connected to GND to compensate the control loop, with an absolute maximum of -0.3 V to 5.5 V. |
| 4 | DIM | input | PWM and analog dimming input, where analog dimming runs from 0.1 V to 2.5 V and the absolute maximum is -0.3 V to 5.5 V. |
| 5 | LPF | input | Capacitor to ground filters the AC ripple from the dimming voltage, with an absolute maximum of -0.3 V to 5.5 V. |
| 6 | OC | input | Current detect input used with the OC resistor, with an absolute maximum of -0.3 V to 5.5 V. |
| 7 | GATE | output | Gate driver output for an external N-channel power MOSFET, with an absolute maximum range of -0.3 V to VDD. |
| 8 | VDD | power_out | Power supply pin for all internal circuits, internally regulated to 7.5 V typical with a range of 7.27 V to 7.73 V. |
| 9 | EP(GND) | power_in | Ground return for all internal circuitry, connected through the exposed pad. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Feeling Tech |
| Package | ESOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| HVDD supply voltage absolute maximum | HVDD | -0.3 | 85 | V | HVDD to GND | 4 | |
| VDD supply voltage absolute maximum | VDD | -0.3 | 10 | V | VDD to GND | 4 | |
| DIM, LPF, COMP, OC voltage absolute maximum | DIM, LPF, COMP, OC | -0.3 | 5.5 | V | 4 | ||
| Supply voltage recommended range | HVDD | 6.5 | 80 | V | 5 | ||
| Operating temperature | -25 | 85 | °C | 5 | |||
| Internally regulated voltage | VDD | 7.27 | 7.5 | 7.73 | V | HVDD=8V, IDD=0A, VDIM=0V | 5 |
| Line regulation of VDD | △VDD, line | 50 | mV | HVDD=8~80V, VDIM=5V | 5 | ||
| Load regulation of VDD | △VDD, load | 100 | mV | HVDD=8V, VDIM=5V, IDD=0~10mA | 5 | ||
| Shutdown current | ISHDN | 620 | uA | HVDD=8~80V, VDIM=0V | 5 | ||
| HVDD under voltage lockout threshold (rising) | VUVLO | 6 | V | HVDD rising | 5 | ||
| VUVLO hysteresis | VUVLO hysteresis | 0.5 | V | 5 | |||
| Current sense voltage | HVDD-VCS | 97 | 100 | 103 | mV | HVDD=12V, VDIM=5V | 5 |
| CS pin input current | ICS | 20 | uA | HVDD=24V, VCS=24V | 5 | ||
| Switching frequency | fSW | 175 | kHz | 5 | |||
| Maximum duty cycle | DMAX | 100 | % | 5 | |||
| Minimum on-time | TMIN | 150 | 250 | ns | 5 | ||
| GATE pull-up resistance | RGH | 0.7 | Ω | VGATE = 0V, VDD = 7.5V | 5 | ||
| GATE pull-down resistance | RGL | 0.7 | Ω | VGATE = VDD, VDD = 7.5V | 5 | ||
| Analog dimming disable | 2.5 | V | ILED=100% | 6 | |||
| Analog dimming enable | VEN_DIM | 0.1 | V | ILED=0.1% | 6 | ||
| Enable voltage | VEN | 0.075 | V | 6 | |||
| Shutdown voltage | VOFF | 0.05 | V | 6 | |||
| DIM shutdown delay | TDELAY | 25 | ms | 6 | |||
| SCP current sense voltage | VSCP_CS | 240 | mV | 6 | |||
| Restart delay time | TSCP | 45 | ms | 6 | |||
| Internal thermal regulation enable temperature | TTHERMAL | 160 | °C | ILED=100% | 6 | ||
| Storage temperature | TS | -40 | 150 | °C | 4 | ||
| Lead temperature (soldering, 10 sec) | 260 | °C | 10 sec soldering | 4 | |||
| Allowable power dissipation | PD | 1500 | mW | SOP-8L(EP) TA≦+25°C | 4 | ||
| Junction to case thermal resistance | θJC | 10 | °C / W | SOP-8L(EP) | 4 | ||
| Junction to ambient thermal resistance | θJA | 60 | °C / W | SOP-8L(EP) | 4 |
CAD (KiCad official)
- Symbol:
FP7195XR-G1 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
fp7195xr-g1-etched.step/fp7195xr-g1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fp7195xr-g1.step/fp7195xr-g1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Feeling Tech datasheet (15 pp, sha256
427015b4374594a6, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).