Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FP7195XR-G1

Feeling Tech · LED Drivers · ESOP-8

FP7195XR-G1 from Feeling Tech, in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HVDD power_in Power supply pin and positive current sense input, operating from 6.5 V to 80 V with an absolute maximum of -0.3 V to 85 V to GND.
2 CS input Negative current sense input, with an absolute maximum range of HVDD-1.5 V to HVDD V.
3 COMP input Compensation pin where a resistor and capacitor are connected to GND to compensate the control loop, with an absolute maximum of -0.3 V to 5.5 V.
4 DIM input PWM and analog dimming input, where analog dimming runs from 0.1 V to 2.5 V and the absolute maximum is -0.3 V to 5.5 V.
5 LPF input Capacitor to ground filters the AC ripple from the dimming voltage, with an absolute maximum of -0.3 V to 5.5 V.
6 OC input Current detect input used with the OC resistor, with an absolute maximum of -0.3 V to 5.5 V.
7 GATE output Gate driver output for an external N-channel power MOSFET, with an absolute maximum range of -0.3 V to VDD.
8 VDD power_out Power supply pin for all internal circuits, internally regulated to 7.5 V typical with a range of 7.27 V to 7.73 V.
9 EP(GND) power_in Ground return for all internal circuitry, connected through the exposed pad.

Key specifications

Parameter Value
Manufacturer Feeling Tech
Package ESOP-8
Category Display Modules / LED Drivers / Display Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
HVDD supply voltage absolute maximum HVDD -0.3 85 V HVDD to GND 4
VDD supply voltage absolute maximum VDD -0.3 10 V VDD to GND 4
DIM, LPF, COMP, OC voltage absolute maximum DIM, LPF, COMP, OC -0.3 5.5 V 4
Supply voltage recommended range HVDD 6.5 80 V 5
Operating temperature -25 85 °C 5
Internally regulated voltage VDD 7.27 7.5 7.73 V HVDD=8V, IDD=0A, VDIM=0V 5
Line regulation of VDD △VDD, line 50 mV HVDD=8~80V, VDIM=5V 5
Load regulation of VDD △VDD, load 100 mV HVDD=8V, VDIM=5V, IDD=0~10mA 5
Shutdown current ISHDN 620 uA HVDD=8~80V, VDIM=0V 5
HVDD under voltage lockout threshold (rising) VUVLO 6 V HVDD rising 5
VUVLO hysteresis VUVLO hysteresis 0.5 V 5
Current sense voltage HVDD-VCS 97 100 103 mV HVDD=12V, VDIM=5V 5
CS pin input current ICS 20 uA HVDD=24V, VCS=24V 5
Switching frequency fSW 175 kHz 5
Maximum duty cycle DMAX 100 % 5
Minimum on-time TMIN 150 250 ns 5
GATE pull-up resistance RGH 0.7 Ω VGATE = 0V, VDD = 7.5V 5
GATE pull-down resistance RGL 0.7 Ω VGATE = VDD, VDD = 7.5V 5
Analog dimming disable 2.5 V ILED=100% 6
Analog dimming enable VEN_DIM 0.1 V ILED=0.1% 6
Enable voltage VEN 0.075 V 6
Shutdown voltage VOFF 0.05 V 6
DIM shutdown delay TDELAY 25 ms 6
SCP current sense voltage VSCP_CS 240 mV 6
Restart delay time TSCP 45 ms 6
Internal thermal regulation enable temperature TTHERMAL 160 °C ILED=100% 6
Storage temperature TS -40 150 °C 4
Lead temperature (soldering, 10 sec) 260 °C 10 sec soldering 4
Allowable power dissipation PD 1500 mW SOP-8L(EP) TA≦+25°C 4
Junction to case thermal resistance θJC 10 °C / W SOP-8L(EP) 4
Junction to ambient thermal resistance θJA 60 °C / W SOP-8L(EP) 4

CAD (KiCad official)

  • Symbol: FP7195XR-G1
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: fp7195xr-g1-etched.step / fp7195xr-g1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fp7195xr-g1.step / fp7195xr-g1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Feeling Tech datasheet (15 pp, sha256 427015b4374594a6, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF