component
FP103DR-LF
Public Made by Adomby adom
Advanced Analog Technology Operational Amplifier, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
main
Ray
fp103dr-lf: specified limits as data (metadata.characteristics, 55 rows from the datasheet)
7d70c55
FP103DR-LF
Advanced Analog Technology · Operational Amplifier · SOP-8
FP103DR-LF from Advanced Analog Technology, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO1 | output | OPA1 output. Op-amp output stage; can source up to 50mA typ and sink up to 10mA typ. |
| 2 | VI1 | input | OPA1 inverting input. Internally tied to the 2.5V VREF reference feedback path in the block diagram (this op-amp is used with the on-chip 2.5V reference on its non-inverting side). |
| 3 | VNI1 | input | OPA1 non-inverting input. Internally connected to the 2.5V precision VREF reference (per the functional block diagram). |
| 4 | VEE | power_in | IC ground or negative supply voltage. Negative supply rail for the amplifiers; typically tied to GND in single-supply operation. |
| 5 | VNI2 | input | OPA2 non-inverting input. General-purpose op-amp input; common-mode range 0V to (Vcc+)-1.5V. |
| 6 | VI2 | input | OPA2 inverting input. General-purpose op-amp input; typ input bias current 20nA. |
| 7 | VO2 | output | OPA2 output. Op-amp output stage; can source up to 50mA typ and sink up to 10mA typ. |
| 8 | VCC | power_in | Positive supply voltage. Operating range 3V to 32V (or +/-16V split); absolute max 36V. Feeds both op-amps and the internal 2.5V reference regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Advanced Analog Technology |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
FP103DR-LFD-LFFP103DR-LFFP103DR-LFP-LF
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (OPA1) | Vio | 1 | 4 | mV | Tamb=25℃ | 5 | |
| Input Offset Voltage (OPA1) | Vio | 5 | mV | Tmin<Tamb<Tmax | 5 | ||
| Supply Voltage Rejection Ratio (OPA1) | SVR | 65 | 100 | dB | Vicm=0V, VCC=5V to 30V | 5 | |
| Output Current Source (OPA1) | Isource | 30 | 50 | mA | VCC=+15V, VO=2V, Vid=+1V | 5 | |
| Short Circuit to Ground (OPA1) | Io | 50 | 70 | mA | Vcc=+15V | 5 | |
| Output Current Sink (OPA1) | Isink | 8 | 10 | mA | Vid=-1V, VCC=+15V, VO=2V | 5 | |
| High Level Output Voltage (OPA1) | VOH | 27 | 28 | V | VCC=+30V, Tamb=25℃, RL=10K | 5 | |
| High Level Output Voltage (OPA1) | VOH | 27 | V | VCC=+30V, Tmin<Tamb<Tmax, RL=10K | 5 | ||
| Low Level Output Voltage (OPA1) | VOL | 3 | 20 | mV | RL=10K, Tmin<Tamb<Tmax | 5 | |
| Slew Rate at Unity Gain (OPA1) | SR | 0.2 | 0.4 | V/μS | Vi=0.5 to 2V, Vcc=15V, RL=2K, CL=100pF, Unity Gain | 5 | |
| Gain Bandwidth Product (OPA1) | GBP | 0.5 | 0.9 | MHz | VCC=30V, RL=2K, CL=100pF, f=100kHz, Vin=10 mV | 5 | |
| Input Offset Voltage (OPA2) | Vio | 1 | 4 | mV | Tamb=25℃ | 6 | |
| Input Offset Voltage (OPA2) | Vio | 5 | mV | Tmin<Tamb<Tmax | 6 | ||
| Input Offset Current (OPA2) | Iio | 2 | 30 | nA | Tamb=25℃ | 6 | |
| Input Offset Current (OPA2) | Iio | 50 | nA | Tmin<Tamb<Tmax | 6 | ||
| Input Bias Current (OPA2) | Iib | 20 | 150 | nA | Tamb=25℃ | 6 | |
| Input Bias Current (OPA2) | Iib | 200 | nA | Tmin<Tamb<Tmax | 6 | ||
| Large Signal Voltage Gain (OPA2) | Avd | 50 | 100 | V/mV | VCC=15V, RL=2K, VO=1.4V to 11.4V | 6 | |
| Large Signal Voltage Gain (OPA2) | Avd | 25 | V/mV | VCC=15V, RL=2K, VO=1.4V to 11.4V; Tmin<Tamb<Tmax | 6 | ||
| Supply Voltage Rejection Ratio (OPA2) | SVR | 65 | 100 | dB | Vcc=5V to 30V | 6 | |
| Input Common Mode Voltage Range (OPA2) | Vicm | 0 | V | VCC=+30V, Tmin<Tamb<Tmax | 6 | ||
| Common Mode Rejection Ratio (OPA2) | CMRR | 70 | 85 | dB | Tamb=25℃ | 6 | |
| Common Mode Rejection Ratio (OPA2) | CMRR | 60 | dB | Tmin<Tamb<Tmax | 6 | ||
| Output Current Source (OPA2) | Isource | 30 | 50 | mA | VCC=+15V, VO=2V, Vid=+1V | 6 | |
| Short Circuit to Ground (OPA2) | Io | 50 | 70 | mA | Vcc=+15V | 6 | |
| Output Current Sink (OPA2) | Isink | 7 | 10 | mA | Vid=-1V, VCC=+15V, VO=2V | 6 | |
| High Level Output Voltage (OPA2) | VOH | 27 | 28 | V | VCC=+30V, Tamb=25℃, RL=10K | 6 | |
| High Level Output Voltage (OPA2) | VOH | 27 | V | VCC=+30V, Tmin<Tamb<Tmax, RL=10K | 6 | ||
| Low Level Output Voltage (OPA2) | VOL | 3 | 20 | mV | RL=10K, Tmin<Tamb<Tmax | 6 | |
| Slew Rate at Unity Gain (OPA2) | SR | 0.2 | 0.4 | V/μS | Vi=0.5 to 3V, Vcc=15V, RL=2K, CL=100pF, Unity Gain | 6 | |
| Gain Bandwidth Product (OPA2) | GBP | 0.5 | 0.9 | MHz | VCC=30V, RL=2K, CL=100pF, f=100kHz, Vin=10mV | 6 | |
| Reference Input Voltage | Vref | 2.475 | 2.5 | 2.525 | V | Tamb=25℃ | 7 |
| Reference Input Voltage | Vref | 2.45 | 2.55 | V | Tmin<Tamb<Tmax | 7 | |
| Reference Input Voltage Deviation Over Temperature Range | ΔVref | 7 | 30 | mV | VKA=Vref; IK=10mA, Tmin<Tamb<Tmax | 7 | |
| Minimum Cathode Current for Regulation | Imin | 0.2 | 1 | mA | VKA=Vref | 7 | |
| Dynamic Impedance | /ZKA/ | 0.2 | 0.5 | Ω | VKA=Vref, ΔIK=1 to 100mA, f<1KHz | 7 | |
| Total Supply Current (excluding current in voltage reference) | ICC | 1.2 | 2 | mA | Vcc+=30V, no load, Tmin<Tamb<Tmax | 7 | |
| Operating Amplifier1 Large Signal Voltage Gain | Avd | 100 | V/mV | Vicm=0V, VCC=15V, RL=2K | 5 | ||
| Input Bias Current (negative input, OPA1) | Iib | 20 | nA | Tamb=25℃, Tmin<Tamb<Tmax | 5 | ||
| Input Offset Voltage Drift (OPA1) | DVio | 7 | μV/℃ | Tamb=25℃ | 5 | ||
| Total Harmonic Distortion (OPA1) | THD | 0.02 | % | f=1kHz, AV=20dB, RL=2K, VCC=30V, CL=100pF, VO=2VPP | 5 | ||
| Input Offset Voltage Drift (OPA2) | DVio | 7 | μV/℃ | Tamb=25℃ | 6 | ||
| Total Supply Current (excluding current in voltage reference) | ICC | 0.7 | mA | Vcc+=5V, no load, Tmin<Tamb<Tmax | 7 | ||
| Supply Voltage (Vcc) | Vcc | 36 | V | 4 | |||
| Differential Input Voltage | Vid | 36 | V | 4 | |||
| Input Voltage | Vi | -0.3 | 36 | V | 4 | ||
| Maximum Junction Temperature | Tj | 150 | ℃ | 4 | |||
| Storage Temperature Range | -65 | 150 | ℃ | 4 | |||
| SOP8 Lead Temperature | 260 | ℃ | soldering, 10 sec | 4 | |||
| Power Dissipation (SOP8) | 650 | mW | Ta=25℃ | 4 | |||
| Power Dissipation (SOP8) | 550 | mW | Ta=70℃ | 4 | |||
| Thermal Resistance Junction to Ambient (SOP package) | 175 | ℃/W | SOP package | 4 | |||
| Operating Temperature Range | -20 | 85 | ℃ | Tmin~Tmax | 4 | ||
| Wide Operating Voltage Range | 3 | 32 | V | Stated in features list (±16V) | 1 | ||
| Cathode Current | Ik | 1 | 100 | mA | Voltage reference cathode current range | 7 |
CAD (KiCad official)
- Symbol:
FP103DR-LF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
fp103dr-lf-etched.step/fp103dr-lf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fp103dr-lf.step/fp103dr-lf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Advanced Analog Technology datasheet (13 pp, sha256
5e17118f4281ee75, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# FP103DR-LF
**Advanced Analog Technology** · Operational Amplifier · SOP-8
FP103DR-LF from Advanced Analog Technology, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VO1 | output | OPA1 output. Op-amp output stage; can source up to 50mA typ and sink up to 10mA typ. |
| 2 | VI1 | input | OPA1 inverting input. Internally tied to the 2.5V VREF reference feedback path in the block diagram (this op-amp is used with the on-chip 2.5V reference on its non-inverting side). |
| 3 | VNI1 | input | OPA1 non-inverting input. Internally connected to the 2.5V precision VREF reference (per the functional block diagram). |
| 4 | VEE | power_in | IC ground or negative supply voltage. Negative supply rail for the amplifiers; typically tied to GND in single-supply operation. |
| 5 | VNI2 | input | OPA2 non-inverting input. General-purpose op-amp input; common-mode range 0V to (Vcc+)-1.5V. |
| 6 | VI2 | input | OPA2 inverting input. General-purpose op-amp input; typ input bias current 20nA. |
| 7 | VO2 | output | OPA2 output. Op-amp output stage; can source up to 50mA typ and sink up to 10mA typ. |
| 8 | VCC | power_in | Positive supply voltage. Operating range 3V to 32V (or +/-16V split); absolute max 36V. Feeds both op-amps and the internal 2.5V reference regulator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Advanced Analog Technology |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `FP103DR-LFD-LF`
- `FP103DR-LF`
- `FP103DR-LFP-LF`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (OPA1) | Vio | | 1 | 4 | mV | Tamb=25℃ | 5 |
| Input Offset Voltage (OPA1) | Vio | | | 5 | mV | Tmin<Tamb<Tmax | 5 |
| Supply Voltage Rejection Ratio (OPA1) | SVR | 65 | 100 | | dB | Vicm=0V, VCC=5V to 30V | 5 |
| Output Current Source (OPA1) | Isource | 30 | 50 | | mA | VCC=+15V, VO=2V, Vid=+1V | 5 |
| Short Circuit to Ground (OPA1) | Io | 50 | 70 | | mA | Vcc=+15V | 5 |
| Output Current Sink (OPA1) | Isink | 8 | 10 | | mA | Vid=-1V, VCC=+15V, VO=2V | 5 |
| High Level Output Voltage (OPA1) | VOH | 27 | 28 | | V | VCC=+30V, Tamb=25℃, RL=10K | 5 |
| High Level Output Voltage (OPA1) | VOH | 27 | | | V | VCC=+30V, Tmin<Tamb<Tmax, RL=10K | 5 |
| Low Level Output Voltage (OPA1) | VOL | | 3 | 20 | mV | RL=10K, Tmin<Tamb<Tmax | 5 |
| Slew Rate at Unity Gain (OPA1) | SR | 0.2 | 0.4 | | V/μS | Vi=0.5 to 2V, Vcc=15V, RL=2K, CL=100pF, Unity Gain | 5 |
| Gain Bandwidth Product (OPA1) | GBP | 0.5 | 0.9 | | MHz | VCC=30V, RL=2K, CL=100pF, f=100kHz, Vin=10 mV | 5 |
| Input Offset Voltage (OPA2) | Vio | | 1 | 4 | mV | Tamb=25℃ | 6 |
| Input Offset Voltage (OPA2) | Vio | | | 5 | mV | Tmin<Tamb<Tmax | 6 |
| Input Offset Current (OPA2) | Iio | | 2 | 30 | nA | Tamb=25℃ | 6 |
| Input Offset Current (OPA2) | Iio | | | 50 | nA | Tmin<Tamb<Tmax | 6 |
| Input Bias Current (OPA2) | Iib | | 20 | 150 | nA | Tamb=25℃ | 6 |
| Input Bias Current (OPA2) | Iib | | | 200 | nA | Tmin<Tamb<Tmax | 6 |
| Large Signal Voltage Gain (OPA2) | Avd | 50 | 100 | | V/mV | VCC=15V, RL=2K, VO=1.4V to 11.4V | 6 |
| Large Signal Voltage Gain (OPA2) | Avd | 25 | | | V/mV | VCC=15V, RL=2K, VO=1.4V to 11.4V; Tmin<Tamb<Tmax | 6 |
| Supply Voltage Rejection Ratio (OPA2) | SVR | 65 | 100 | | dB | Vcc=5V to 30V | 6 |
| Input Common Mode Voltage Range (OPA2) | Vicm | 0 | | | V | VCC=+30V, Tmin<Tamb<Tmax | 6 |
| Common Mode Rejection Ratio (OPA2) | CMRR | 70 | 85 | | dB | Tamb=25℃ | 6 |
| Common Mode Rejection Ratio (OPA2) | CMRR | 60 | | | dB | Tmin<Tamb<Tmax | 6 |
| Output Current Source (OPA2) | Isource | 30 | 50 | | mA | VCC=+15V, VO=2V, Vid=+1V | 6 |
| Short Circuit to Ground (OPA2) | Io | 50 | 70 | | mA | Vcc=+15V | 6 |
| Output Current Sink (OPA2) | Isink | 7 | 10 | | mA | Vid=-1V, VCC=+15V, VO=2V | 6 |
| High Level Output Voltage (OPA2) | VOH | 27 | 28 | | V | VCC=+30V, Tamb=25℃, RL=10K | 6 |
| High Level Output Voltage (OPA2) | VOH | 27 | | | V | VCC=+30V, Tmin<Tamb<Tmax, RL=10K | 6 |
| Low Level Output Voltage (OPA2) | VOL | | 3 | 20 | mV | RL=10K, Tmin<Tamb<Tmax | 6 |
| Slew Rate at Unity Gain (OPA2) | SR | 0.2 | 0.4 | | V/μS | Vi=0.5 to 3V, Vcc=15V, RL=2K, CL=100pF, Unity Gain | 6 |
| Gain Bandwidth Product (OPA2) | GBP | 0.5 | 0.9 | | MHz | VCC=30V, RL=2K, CL=100pF, f=100kHz, Vin=10mV | 6 |
| Reference Input Voltage | Vref | 2.475 | 2.5 | 2.525 | V | Tamb=25℃ | 7 |
| Reference Input Voltage | Vref | 2.45 | | 2.55 | V | Tmin<Tamb<Tmax | 7 |
| Reference Input Voltage Deviation Over Temperature Range | ΔVref | | 7 | 30 | mV | VKA=Vref; IK=10mA, Tmin<Tamb<Tmax | 7 |
| Minimum Cathode Current for Regulation | Imin | | 0.2 | 1 | mA | VKA=Vref | 7 |
| Dynamic Impedance | /ZKA/ | | 0.2 | 0.5 | Ω | VKA=Vref, ΔIK=1 to 100mA, f<1KHz | 7 |
| Total Supply Current (excluding current in voltage reference) | ICC | | 1.2 | 2 | mA | Vcc+=30V, no load, Tmin<Tamb<Tmax | 7 |
| Operating Amplifier1 Large Signal Voltage Gain | Avd | | 100 | | V/mV | Vicm=0V, VCC=15V, RL=2K | 5 |
| Input Bias Current (negative input, OPA1) | Iib | | 20 | | nA | Tamb=25℃, Tmin<Tamb<Tmax | 5 |
| Input Offset Voltage Drift (OPA1) | DVio | | 7 | | μV/℃ | Tamb=25℃ | 5 |
| Total Harmonic Distortion (OPA1) | THD | | 0.02 | | % | f=1kHz, AV=20dB, RL=2K, VCC=30V, CL=100pF, VO=2VPP | 5 |
| Input Offset Voltage Drift (OPA2) | DVio | | 7 | | μV/℃ | Tamb=25℃ | 6 |
| Total Supply Current (excluding current in voltage reference) | ICC | | 0.7 | | mA | Vcc+=5V, no load, Tmin<Tamb<Tmax | 7 |
| Supply Voltage (Vcc) | Vcc | | | 36 | V | | 4 |
| Differential Input Voltage | Vid | | | 36 | V | | 4 |
| Input Voltage | Vi | -0.3 | | 36 | V | | 4 |
| Maximum Junction Temperature | Tj | | | 150 | ℃ | | 4 |
| Storage Temperature Range | | -65 | | 150 | ℃ | | 4 |
| SOP8 Lead Temperature | | | | 260 | ℃ | soldering, 10 sec | 4 |
| Power Dissipation (SOP8) | | | | 650 | mW | Ta=25℃ | 4 |
| Power Dissipation (SOP8) | | | | 550 | mW | Ta=70℃ | 4 |
| Thermal Resistance Junction to Ambient (SOP package) | | | 175 | | ℃/W | SOP package | 4 |
| Operating Temperature Range | | -20 | | 85 | ℃ | Tmin~Tmax | 4 |
| Wide Operating Voltage Range | | 3 | | 32 | V | Stated in features list (±16V) | 1 |
| Cathode Current | Ik | 1 | | 100 | mA | Voltage reference cathode current range | 7 |
## CAD (KiCad official)
- Symbol: `FP103DR-LF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `fp103dr-lf-etched.step` / `fp103dr-lf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fp103dr-lf.step` / `fp103dr-lf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Advanced Analog Technology datasheet](docs/fp103dr-lf-datasheet.pdf) (13 pp, sha256 `5e17118f4281ee75`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/fp103dr-lf-datasheet.pdf)