main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs fp103dr-lf: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers fp103dr-lf: viewers · Ray
fp103dr-lf-etched.fit.json fp103dr-lf: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fp103dr-lf-etched.glb fp103dr-lf: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
fp103dr-lf-etched.step fp103dr-lf: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
fp103dr-lf.glb Publish 0.1.0 · Ray
fp103dr-lf.kicad_mod Publish 0.1.0 · Ray
fp103dr-lf.kicad_sym Publish 0.1.0 · Ray
fp103dr-lf.lbr Publish 0.1.0 · Ray
fp103dr-lf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json fp103dr-lf: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body… · Ray
README.md fp103dr-lf: specified limits as data (metadata.characteristics, 55 rows from the datasheet) · Ray

FP103DR-LF

Advanced Analog Technology · Operational Amplifier · SOP-8

FP103DR-LF from Advanced Analog Technology, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VO1 output OPA1 output. Op-amp output stage; can source up to 50mA typ and sink up to 10mA typ.
2 VI1 input OPA1 inverting input. Internally tied to the 2.5V VREF reference feedback path in the block diagram (this op-amp is used with the on-chip 2.5V reference on its non-inverting side).
3 VNI1 input OPA1 non-inverting input. Internally connected to the 2.5V precision VREF reference (per the functional block diagram).
4 VEE power_in IC ground or negative supply voltage. Negative supply rail for the amplifiers; typically tied to GND in single-supply operation.
5 VNI2 input OPA2 non-inverting input. General-purpose op-amp input; common-mode range 0V to (Vcc+)-1.5V.
6 VI2 input OPA2 inverting input. General-purpose op-amp input; typ input bias current 20nA.
7 VO2 output OPA2 output. Op-amp output stage; can source up to 50mA typ and sink up to 10mA typ.
8 VCC power_in Positive supply voltage. Operating range 3V to 32V (or +/-16V split); absolute max 36V. Feeds both op-amps and the internal 2.5V reference regulator.

Key specifications

Parameter Value
Manufacturer Advanced Analog Technology
Package SOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • FP103DR-LFD-LF
  • FP103DR-LF
  • FP103DR-LFP-LF

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (OPA1) Vio 1 4 mV Tamb=25℃ 5
Input Offset Voltage (OPA1) Vio 5 mV Tmin<Tamb<Tmax 5
Supply Voltage Rejection Ratio (OPA1) SVR 65 100 dB Vicm=0V, VCC=5V to 30V 5
Output Current Source (OPA1) Isource 30 50 mA VCC=+15V, VO=2V, Vid=+1V 5
Short Circuit to Ground (OPA1) Io 50 70 mA Vcc=+15V 5
Output Current Sink (OPA1) Isink 8 10 mA Vid=-1V, VCC=+15V, VO=2V 5
High Level Output Voltage (OPA1) VOH 27 28 V VCC=+30V, Tamb=25℃, RL=10K 5
High Level Output Voltage (OPA1) VOH 27 V VCC=+30V, Tmin<Tamb<Tmax, RL=10K 5
Low Level Output Voltage (OPA1) VOL 3 20 mV RL=10K, Tmin<Tamb<Tmax 5
Slew Rate at Unity Gain (OPA1) SR 0.2 0.4 V/μS Vi=0.5 to 2V, Vcc=15V, RL=2K, CL=100pF, Unity Gain 5
Gain Bandwidth Product (OPA1) GBP 0.5 0.9 MHz VCC=30V, RL=2K, CL=100pF, f=100kHz, Vin=10 mV 5
Input Offset Voltage (OPA2) Vio 1 4 mV Tamb=25℃ 6
Input Offset Voltage (OPA2) Vio 5 mV Tmin<Tamb<Tmax 6
Input Offset Current (OPA2) Iio 2 30 nA Tamb=25℃ 6
Input Offset Current (OPA2) Iio 50 nA Tmin<Tamb<Tmax 6
Input Bias Current (OPA2) Iib 20 150 nA Tamb=25℃ 6
Input Bias Current (OPA2) Iib 200 nA Tmin<Tamb<Tmax 6
Large Signal Voltage Gain (OPA2) Avd 50 100 V/mV VCC=15V, RL=2K, VO=1.4V to 11.4V 6
Large Signal Voltage Gain (OPA2) Avd 25 V/mV VCC=15V, RL=2K, VO=1.4V to 11.4V; Tmin<Tamb<Tmax 6
Supply Voltage Rejection Ratio (OPA2) SVR 65 100 dB Vcc=5V to 30V 6
Input Common Mode Voltage Range (OPA2) Vicm 0 V VCC=+30V, Tmin<Tamb<Tmax 6
Common Mode Rejection Ratio (OPA2) CMRR 70 85 dB Tamb=25℃ 6
Common Mode Rejection Ratio (OPA2) CMRR 60 dB Tmin<Tamb<Tmax 6
Output Current Source (OPA2) Isource 30 50 mA VCC=+15V, VO=2V, Vid=+1V 6
Short Circuit to Ground (OPA2) Io 50 70 mA Vcc=+15V 6
Output Current Sink (OPA2) Isink 7 10 mA Vid=-1V, VCC=+15V, VO=2V 6
High Level Output Voltage (OPA2) VOH 27 28 V VCC=+30V, Tamb=25℃, RL=10K 6
High Level Output Voltage (OPA2) VOH 27 V VCC=+30V, Tmin<Tamb<Tmax, RL=10K 6
Low Level Output Voltage (OPA2) VOL 3 20 mV RL=10K, Tmin<Tamb<Tmax 6
Slew Rate at Unity Gain (OPA2) SR 0.2 0.4 V/μS Vi=0.5 to 3V, Vcc=15V, RL=2K, CL=100pF, Unity Gain 6
Gain Bandwidth Product (OPA2) GBP 0.5 0.9 MHz VCC=30V, RL=2K, CL=100pF, f=100kHz, Vin=10mV 6
Reference Input Voltage Vref 2.475 2.5 2.525 V Tamb=25℃ 7
Reference Input Voltage Vref 2.45 2.55 V Tmin<Tamb<Tmax 7
Reference Input Voltage Deviation Over Temperature Range ΔVref 7 30 mV VKA=Vref; IK=10mA, Tmin<Tamb<Tmax 7
Minimum Cathode Current for Regulation Imin 0.2 1 mA VKA=Vref 7
Dynamic Impedance /ZKA/ 0.2 0.5 Ω VKA=Vref, ΔIK=1 to 100mA, f<1KHz 7
Total Supply Current (excluding current in voltage reference) ICC 1.2 2 mA Vcc+=30V, no load, Tmin<Tamb<Tmax 7
Operating Amplifier1 Large Signal Voltage Gain Avd 100 V/mV Vicm=0V, VCC=15V, RL=2K 5
Input Bias Current (negative input, OPA1) Iib 20 nA Tamb=25℃, Tmin<Tamb<Tmax 5
Input Offset Voltage Drift (OPA1) DVio 7 μV/℃ Tamb=25℃ 5
Total Harmonic Distortion (OPA1) THD 0.02 % f=1kHz, AV=20dB, RL=2K, VCC=30V, CL=100pF, VO=2VPP 5
Input Offset Voltage Drift (OPA2) DVio 7 μV/℃ Tamb=25℃ 6
Total Supply Current (excluding current in voltage reference) ICC 0.7 mA Vcc+=5V, no load, Tmin<Tamb<Tmax 7
Supply Voltage (Vcc) Vcc 36 V 4
Differential Input Voltage Vid 36 V 4
Input Voltage Vi -0.3 36 V 4
Maximum Junction Temperature Tj 150 ℃ 4
Storage Temperature Range -65 150 ℃ 4
SOP8 Lead Temperature 260 ℃ soldering, 10 sec 4
Power Dissipation (SOP8) 650 mW Ta=25℃ 4
Power Dissipation (SOP8) 550 mW Ta=70℃ 4
Thermal Resistance Junction to Ambient (SOP package) 175 ℃/W SOP package 4
Operating Temperature Range -20 85 ℃ Tmin~Tmax 4
Wide Operating Voltage Range 3 32 V Stated in features list (±16V) 1
Cathode Current Ik 1 100 mA Voltage reference cathode current range 7

CAD (KiCad official)

  • Symbol: FP103DR-LF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: fp103dr-lf-etched.step / fp103dr-lf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fp103dr-lf.step / fp103dr-lf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Advanced Analog Technology datasheet (13 pp, sha256 5e17118f4281ee75, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF