main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers fod8316: viewers rendered from the public page · Ray
fod8316-etched.glb Publish 0.1.0 · Ray
fod8316-etched.step fod8316: factory component page (tier=mfr) · Ray
fod8316-hero.glb fod8316: hero GLB from the etched model (keeps the MPN mark) · Ray
fod8316-hero.overlay.json Publish 0.1.0 · Ray
fod8316.glb Publish 0.1.0 · Ray
fod8316.kicad_mod Publish 0.1.0 · Ray
fod8316.kicad_sym Publish 0.1.0 · Ray
fod8316.lbr Publish 0.1.0 · Ray
fod8316.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

FOD8316

onsemi · Photoelectric Thyristor (Solid State Relays) · SOIC-16-300mil

FOD8316 from onsemi, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN+ power_in Non-inverting CMOS/TTL-compatible gate drive control input, with logic-high minimum 2.0 V, logic-low maximum 0.8 V, and absolute input range −0.5 V to VDD1.
2 VIN− power_in Inverting CMOS/TTL-compatible gate drive control input, with logic-high minimum 2.0 V, logic-low maximum 0.8 V, and absolute input range −0.5 V to VDD1.
3 VDD1 power_in Positive input supply voltage, 3 V to 5.5 V recommended (absolute maximum 6 V).
4 GND1 power_in Input-side ground reference for the input IC.
5 RESET input FAULT reset input that must be pulled low for longer than PWRESET to clear a latched fault, with the same logic thresholds as the VIN inputs.
6 FAULT output Open-drain fault output that is latched low on desaturation detection, with a maximum voltage of VDD1 and an absolute maximum current of 15 mA.
7 VLED1+ unconnected LED1 anode; the datasheet says do not connect, leave floating.
8 VLED1− passive LED1 cathode that must be connected to ground.
9 VSS power_in Negative output supply voltage for the gate driver output stage; VDD2 − VSS is recommended at 15 V to 30 V.
10 VSS power_in Negative output supply voltage for the gate driver output stage; VDD2 − VSS is recommended at 15 V to 30 V.
11 VO output Gate-drive output that drives the IGBT gate, with an absolute maximum peak output current of 3 A.
12 VS power_in Source of the pull-up PMOS transistor in the output stage, with recommended VS of VSS + 7.5 V to VDD2.
13 VDD2 power_in Positive output supply voltage, with VDD2 − VSS of 15 V to 30 V recommended (absolute maximum 35 V).
14 DESAT input Desaturation voltage input for IGBT short-circuit detection, referenced to VE, with a typical threshold of 6.5 V (6.0 V to 7.2 V).
15 VLED2+ unconnected LED2 anode; the datasheet says do not connect, leave floating.
16 VE power_in Output supply voltage and IGBT emitter reference, and the primary ground reference for UVLO and DESAT detection.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-16-300mil
Category Optocoupler/LED/Digital Tube/Photoelectric Device
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TSTG -40 125 °C 5
Operating Temperature TOPR -40 100 °C 5
Junction Temperature TJ -40 125 °C 5
Lead Wave Solder Temperature TSOL 260 °C for 10 seconds (No Solder Immersion) 5
Fault Output Current IFAULT 15 mA 5
Peak Output Current IO(PEAK) 3 A Note 1 5
Negative Output Supply Voltage VE − VSS 0 15 V Note 2 5
Positive Output Supply Voltage VDD2 − VE -0.5 35 V as printed: − (VE − VSS) in the value 5
Gate Drive Output Voltage VO(peak) -0.5 35 V 5
Output Supply Voltage VDD2 − VSS -0.5 35 V 5
Positive Input Supply Voltage VDD1 -0.5 6 V 5
Input Voltages VIN+, VIN− and VRESET -0.5 V max printed as VDD1 5
Input Power Dissipation PDI 100 mW Notes 3, 5 5
Output Power Dissipation PDO 600 mW Notes 4, 5; derate linearly above 64°C free air at 10.2 mW/°C 5
Ambient Operating Temperature TA -40 100 °C 5
Input Supply Voltage VDD1 3 5.5 V Note 6 5
Total Output Supply Voltage VDD2 − VSS 15 30 V 5
Negative Output Supply Voltage VE − VSS 0 15 V 5
Positive Output Supply Voltage VDD2 − VE 15 30 V Note 6; max printed as 30 − (VE − VSS) 5
Logic Low Input Voltages VIN+L, VIN−L, VRESETL 0.8 V 6
Logic High Input Voltages VIN+H, VIN−H, VRESETH 2 V 6
Logic Low Input Currents IIN+L, IIN−L, IRESETL -0.5 -0.001 mA VIN = 0.4 V 6
FAULT Logic Low Output Current IFAULTL 5 12 mA VFAULT = 0.4 V 6
FAULT Logic High Output Current IFAULTH -40 0.002 A VFAULT = VDD1 6
High Level Output Current IOH -1 -2.5 A VO = VDD2 − 3 V 6
High Level Output Current IOH -2.5 A VO = VDD2 − 6 V (Note 10) 6
Low Level Output Current IOL 1 3 A VO = VSS + 3 V 6
Low Level Output Current IOL 2.5 A VO = VSS + 6 V (Note 11) 6
Low Level Output Current During Fault Condition IOLF 70 125 170 mA VO − VSS = 14 V 6
Low Level Output Voltage VOL 0.1 0.5 V IO = 100 mA 6
High Level Supply Current IDD1H 14 17 mA VIN+ = VDD1 = 5.5 V, VIN− = 0 V 6
Low Level Supply Current IDD1L 2 3 mA VIN+ = VIN− = 0 V, VDD1 = 5.5 V 6
High Level Output Supply Current IDD2H 1.7 3 mA VO = Open (Note 14) 6
Low Level Output Supply Current IDD2L 1.8 2.8 mA VO = Open 6
High Level Source Current ISH 0.65 1.5 mA IO = 0 mA 6
Low Level Source Current ISL 0.6 1.4 mA IO = 0 mA 6
VE Low Level Supply Current IEL -0.8 -0.5 mA 6
VE High Level Supply Current IEH -0.5 -0.25 mA 6
Blanking Capacitor Charge Current ICHG -0.13 -0.25 -0.33 mA VDESAT = 2 V (Note 14, 15) 6
Blanking Capacitor Discharge Current IDSCHG 10 36 mA VDESAT = 7 V 6
Under Voltage Lockout Threshold (rising) VUVLO+ 10.8 11.7 12.7 V VO > 5 V @ 25°C (Note 14) 6
Under Voltage Lockout Threshold (falling) VUVLO− 9.8 10.7 11.7 V VO < 5 V @ 25°C 6
Under Voltage Lockout Threshold Hysteresis UVLOHYS 0.4 1 V @ 25°C 6
DESAT Threshold VDESAT 6 6.5 7.2 V VDD2 − VE > VULVO−, VO < 5 V (Note 14) 6
Propagation Delay Time to Logic Low Output tPHL 140 250 ns Rg = 10 , Cg = 10 nF, f = 10 kHz, Duty Cycle = 50% (Note 16) 7
Propagation Delay Time to Logic High Output tPLH 160 250 ns Rg = 10 , Cg = 10 nF, f = 10 kHz, Duty Cycle = 50% (Note 16) 7
Pulse Width Distortion PWD 20 100 ns / tPHL − tPLH / (Note 19) 7
Skew Propagation Delay Difference between Any Two Parts or Channels PDD -150 150 ns (tPHL − tPLH) (Note 20) 7
DESAT Sense to 90% VO Delay tDESAT(90%) 450 700 ns Rg = 10 , Cg = 10 nF, VDD2 − VSS = 30 V (Note 21) 7
DESAT Sense to 10% VO Delay tDESAT(10%) 2.7 4 s (Note 21) 7
DESAT Sense to Low Level FAULT Signal Delay tDESAT(FAULT) 1.4 5 s (Note 22) 7
RESET to High Level FAULT Signal Delay tRESET(FAULT) 3 6 20 s (Note 24) 7
DESAT Input Mute tDESAT(MUTE) 10 22 35 s 7
RESET Signal Pulse Width PWRESET 1.2 s 7
Common Mode Transient Immunity at Output High /CMH/ 35 50 kV/s TA = 25°C, VDD1 = 5 V, VDD2 = 25 V, VSS = Ground, VCM = 1500 Vpk (Note 28) 7
Common Mode Transient Immunity at Output Low /CML/ 35 50 kV/s TA = 25°C, VDD1 = 5V, VDD2 = 25 V, VSS = Ground, VCM = 1500 Vpk (Note 29) 7
Input−Output Isolation Voltage VISO 4243 VRMS TA = 25°C, Relative Humidity < 50 %, t = 1.0 minute, II−O ≤ 10 A, 50 Hz (Note 7, 8, 9) 6

CAD (KiCad official)

  • Symbol: FOD8316
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: fod8316-etched.step / fod8316-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fod8316.step / fod8316.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (28 pp, sha256 9a19dcf7f95068f2, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF