component
FOD3184TV
Public Made by Adomby adom
onsemi Optocouplers - Logic Output, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FOD3184TV
onsemi · Optocouplers - Logic Output · DIP-8
FOD3184TV from onsemi, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected in the pin definition table; see review_required because footnote 9 says pins 1 and 4 must be connected to LED common. |
| 2 | Anode | passive | LED anode, driven with an ON input current IF(ON) of 10 to 16 mA and a maximum reverse input voltage VR of 5 V. |
| 3 | Cathode | passive | LED cathode, which returns the input drive current; the OFF input voltage VF(OFF) is -3.0 to 0.8 V. |
| 4 | NC | unconnected | Not connected in the pin definition table; see review_required because footnote 9 says pins 1 and 4 must be connected to LED common. |
| 5 | VSS | power_in | Negative supply voltage; a 0.1µF bypass capacitor must be connected between pins 5 and 8, and VDD-VSS is recommended at 15 to 30 V. |
| 6 | VO2 | output | Output voltage 2, internally connected to VO1, providing the push-pull gate drive with 3A peak output current. |
| 7 | VO1 | output | Output voltage 1, providing the gate drive for the MOSFET/IGBT with 3A peak output current and rail-to-rail output swing. |
| 8 | VDD | power_in | Positive supply voltage; recommended VDD-VSS is 15 to 30 V, with an absolute maximum VDD-VSS of -0.5 to 35 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | DIP-8 |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | TSTG | -40 | 125 | °C | 5 | ||
| Operating Temperature | TOPR | -40 | 100 | °C | 5 | ||
| Junction Temperature | TJ | -40 | 125 | °C | 5 | ||
| Lead Solder Temperature | TSOL | 260 | °C | Wave solder, for 10 sec | 5 | ||
| Average Input Current | IF(AVG) | 25 | mA | Note 1: derate linearly above +79°C at 0.37mA/°C | 5 | ||
| LED Current Minimum Rate of Rise/Fall | IF(tr, tf) | 250 | ns | 5 | |||
| Reverse Input Voltage | VR | 5 | V | 5 | |||
| High Peak Output Current | IOH(PEAK) | 3 | A | Note 2: maximum pulse width 10µs | 5 | ||
| Low Peak Output Current | IOL(PEAK) | 3 | A | Note 2: maximum pulse width 10µs | 5 | ||
| Supply Voltage | VDD, VSS | -0.5 | 35 | V | 5 | ||
| Output Voltage | VO(PEAK) | 0 | V | 5 | |||
| Output Power Dissipation | PO | 250 | mW | Note 3: derate linearly above +79°C at 5.73mW/°C | 5 | ||
| Total Power Dissipation | PD | 295 | mW | Note 3: derate linearly above +79°C at 5.73mW/°C | 5 | ||
| Power Supply | VDD, VSS | 15 | 30 | V | 5 | ||
| Input Current (ON) | IF(ON) | 10 | 16 | mA | 5 | ||
| Input Voltage (OFF) | VF(OFF) | -3 | 0.8 | V | 5 | ||
| Pulse Width Distortion | PWD | 35 | 65 | ns | 7 | ||
| Propagation Delay Difference Between Any Two Parts | PDD | -90 | 90 | ns | 7 | ||
| Propagation Delay Time to High Output Level | tPLH | 50 | 120 | 210 | ns | IF = 10mA, Rg = 10Ω, f = 250kHz, Duty Cycle = 50%, Cg = 10nF | 7 |
| Propagation Delay Time to Low Output Level | tPHL | 50 | 145 | 210 | ns | IF = 10mA, Rg = 10Ω, f = 250kHz, Duty Cycle = 50%, Cg = 10nF | 7 |
| High Level Supply Current | IDDH | 2.6 | 3.5 | mA | Output open, IF = 10 to 16mA | 6 | |
| Low Level Supply Current | IDDL | 2.5 | 3.5 | mA | Output open, VF = -3.0 to 0.8V | 6 | |
| Threshold Input Current Low to High | IFLH | 3 | 7.5 | mA | IO = 0mA, VO > 5V | 6 | |
| High Level Output Current | IOH | -0.9 | -0.5 | A | VOH = (VDD, VSS, 1V) | 6 | |
| Low Level Output Current | IOL | 0.5 | 1 | A | VOL = (VDD, VSS + 1V) | 6 | |
| Input Forward Voltage | VF | 1.1 | 1.43 | 1.8 | V | IF = 10mA | 6 |
| UVLO Threshold | VUVLO+ | 11.5 | 13 | 13.5 | V | VO > 5V, IF = 10mA | 6 |
| UVLO Threshold | VUVLO- | 10 | 11.5 | 12 | V | VO < 5V, IF = 10mA | 6 |
| Output High Level Common Mode Transient Immunity | CMH | 35 | 50 | kV/µs | TA = +25°C, If = 10mA to 16mA, VCM = 2kV, VDD = 30V | 7 | |
| Output Low Level Common Mode Transient Immunity | CML | 35 | 50 | kV/µs | TA = +25°C, Vf = 0V, VCM = 2kV, VDD = 30V | 7 | |
| High Level Output Current | IOH | -2.5 | A | VOH = (VDD, VSS, 6V) | 6 | ||
| Low Level Output Current | IOL | 2.5 | A | VOL = (VDD, VSS + 6V) | 6 | ||
| Threshold Input Voltage High to Low | VFHL | 0.8 | V | IO = 0mA, VO < 5V | 6 | ||
| Temperature Coefficient of Forward Voltage | ΔVF/TA | -1.5 | mV/°C | IF = 10mA | 6 | ||
| UVLO Hysteresis | UVLOHYST | 1.5 | V | 6 | |||
| Input Reverse Breakdown Voltage | BVR | 5 | V | IR = 10µA | 6 | ||
| Input Capacitance | CIN | 25 | pF | f = 1MHz, VF = 0V | 6 | ||
| Rise Time | tr | 38 | ns | CL = 10nF, Rg = 10Ω | 7 | ||
| Fall Time | tf | 24 | ns | CL = 10nF, Rg = 10Ω | 7 | ||
| UVLO Turn On Delay | tUVLO ON | 2 | µs | 7 | |||
| UVLO Turn Off Delay | tUVLO OFF | 0.3 | µs | 7 | |||
| Capacitance (input to output) | CI-O | 1 | pF | Freq. = 1MHz | 7 | ||
| Withstand Isolation Voltage | VISO | 5000 | Vrms | TA = 25°C, R.H. < 50%, t = 1min., II-O ≤ 10µA | 7 |
CAD (KiCad official)
- Symbol:
FOD3184TV - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
fod3184tv-etched.step/fod3184tv-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fod3184tv.step/fod3184tv.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (26 pp, sha256
2b61d1acf729b489, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).