Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FOD3184TV

onsemi · Optocouplers - Logic Output · DIP-8

FOD3184TV from onsemi, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected in the pin definition table; see review_required because footnote 9 says pins 1 and 4 must be connected to LED common.
2 Anode passive LED anode, driven with an ON input current IF(ON) of 10 to 16 mA and a maximum reverse input voltage VR of 5 V.
3 Cathode passive LED cathode, which returns the input drive current; the OFF input voltage VF(OFF) is -3.0 to 0.8 V.
4 NC unconnected Not connected in the pin definition table; see review_required because footnote 9 says pins 1 and 4 must be connected to LED common.
5 VSS power_in Negative supply voltage; a 0.1µF bypass capacitor must be connected between pins 5 and 8, and VDD-VSS is recommended at 15 to 30 V.
6 VO2 output Output voltage 2, internally connected to VO1, providing the push-pull gate drive with 3A peak output current.
7 VO1 output Output voltage 1, providing the gate drive for the MOSFET/IGBT with 3A peak output current and rail-to-rail output swing.
8 VDD power_in Positive supply voltage; recommended VDD-VSS is 15 to 30 V, with an absolute maximum VDD-VSS of -0.5 to 35 V.

Key specifications

Parameter Value
Manufacturer onsemi
Package DIP-8
Category Optocoupler/LED/Digital Tube/Photoelectric Device
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TSTG -40 125 °C 5
Operating Temperature TOPR -40 100 °C 5
Junction Temperature TJ -40 125 °C 5
Lead Solder Temperature TSOL 260 °C Wave solder, for 10 sec 5
Average Input Current IF(AVG) 25 mA Note 1: derate linearly above +79°C at 0.37mA/°C 5
LED Current Minimum Rate of Rise/Fall IF(tr, tf) 250 ns 5
Reverse Input Voltage VR 5 V 5
High Peak Output Current IOH(PEAK) 3 A Note 2: maximum pulse width 10µs 5
Low Peak Output Current IOL(PEAK) 3 A Note 2: maximum pulse width 10µs 5
Supply Voltage VDD, VSS -0.5 35 V 5
Output Voltage VO(PEAK) 0 V 5
Output Power Dissipation PO 250 mW Note 3: derate linearly above +79°C at 5.73mW/°C 5
Total Power Dissipation PD 295 mW Note 3: derate linearly above +79°C at 5.73mW/°C 5
Power Supply VDD, VSS 15 30 V 5
Input Current (ON) IF(ON) 10 16 mA 5
Input Voltage (OFF) VF(OFF) -3 0.8 V 5
Pulse Width Distortion PWD 35 65 ns 7
Propagation Delay Difference Between Any Two Parts PDD -90 90 ns 7
Propagation Delay Time to High Output Level tPLH 50 120 210 ns IF = 10mA, Rg = 10Ω, f = 250kHz, Duty Cycle = 50%, Cg = 10nF 7
Propagation Delay Time to Low Output Level tPHL 50 145 210 ns IF = 10mA, Rg = 10Ω, f = 250kHz, Duty Cycle = 50%, Cg = 10nF 7
High Level Supply Current IDDH 2.6 3.5 mA Output open, IF = 10 to 16mA 6
Low Level Supply Current IDDL 2.5 3.5 mA Output open, VF = -3.0 to 0.8V 6
Threshold Input Current Low to High IFLH 3 7.5 mA IO = 0mA, VO > 5V 6
High Level Output Current IOH -0.9 -0.5 A VOH = (VDD, VSS, 1V) 6
Low Level Output Current IOL 0.5 1 A VOL = (VDD, VSS + 1V) 6
Input Forward Voltage VF 1.1 1.43 1.8 V IF = 10mA 6
UVLO Threshold VUVLO+ 11.5 13 13.5 V VO > 5V, IF = 10mA 6
UVLO Threshold VUVLO- 10 11.5 12 V VO < 5V, IF = 10mA 6
Output High Level Common Mode Transient Immunity CMH 35 50 kV/µs TA = +25°C, If = 10mA to 16mA, VCM = 2kV, VDD = 30V 7
Output Low Level Common Mode Transient Immunity CML 35 50 kV/µs TA = +25°C, Vf = 0V, VCM = 2kV, VDD = 30V 7
High Level Output Current IOH -2.5 A VOH = (VDD, VSS, 6V) 6
Low Level Output Current IOL 2.5 A VOL = (VDD, VSS + 6V) 6
Threshold Input Voltage High to Low VFHL 0.8 V IO = 0mA, VO < 5V 6
Temperature Coefficient of Forward Voltage ΔVF/TA -1.5 mV/°C IF = 10mA 6
UVLO Hysteresis UVLOHYST 1.5 V 6
Input Reverse Breakdown Voltage BVR 5 V IR = 10µA 6
Input Capacitance CIN 25 pF f = 1MHz, VF = 0V 6
Rise Time tr 38 ns CL = 10nF, Rg = 10Ω 7
Fall Time tf 24 ns CL = 10nF, Rg = 10Ω 7
UVLO Turn On Delay tUVLO ON 2 µs 7
UVLO Turn Off Delay tUVLO OFF 0.3 µs 7
Capacitance (input to output) CI-O 1 pF Freq. = 1MHz 7
Withstand Isolation Voltage VISO 5000 Vrms TA = 25°C, R.H. < 50%, t = 1min., II-O ≤ 10µA 7

CAD (KiCad official)

  • Symbol: FOD3184TV
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: fod3184tv-etched.step / fod3184tv-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fod3184tv.step / fod3184tv.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (26 pp, sha256 2b61d1acf729b489, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF