main
Ray fm8502d: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) ae10b0b
{
  "schema_version": 1,
  "type": "component",
  "slug": "fm8502d",
  "title": "FM8502D",
  "brief": "Shenzhen Fuman LED Drivers, SOP-7. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "led-drv",
    "fm8502d"
  ],
  "component": {
    "mpn": "FM8502D",
    "manufacturer": "Shenzhen Fuman",
    "package": "SOP-7",
    "pin_count": 7,
    "category": "LED-drv",
    "subcategory": "LED Drivers",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121830_Shenzhen-Fuman-Elec-FM8502D_C2938797.pdf",
    "parts": {
      "symbol": "fm8502d.kicad_sym",
      "footprint": "fm8502d.kicad_mod",
      "model_3d": "fm8502d-etched.glb",
      "model_3d_plain": "fm8502d.glb",
      "model_3d_step": "fm8502d-etched.step",
      "model_3d_step_plain": "fm8502d.step",
      "lbr": "fm8502d.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Chip ground reference. All small-signal grounds and the CS sense-resistor low side should return here, tied to the bulk-cap negative terminal at a single point."
      },
      {
        "number": "2",
        "name": "ROVP",
        "type": "input",
        "description": "Open-circuit (output) over-voltage protection setpoint. An external resistor to GND sinks ~30 uA (22-38 uA) from this pin to program Vovp. Pin doubles as an Enable input: below ~240 mV the chip disables switching (Iout=0); above ~400 mV (VEnable) switching resumes, enabling switch-based color-temperature dimming. Leave floating if OVP/Enable is not used."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect. Must be left floating (open) to preserve the required creepage distance between HV-adjacent pins and the low-voltage pins."
      },
      {
        "number": "4",
        "name": "HV",
        "type": "power_in",
        "description": "High-voltage supply input, rated up to 700 V absolute max. Connects (typically through the rectified bulk-cap positive rail) to the internal high-voltage JFET that charges the internal VCC. Turn-on threshold Vhv_ON = 7.5-9 V; UVLO Vhv_OFF = 5.9-7.5 V. Route away from CS and ROVP traces."
      },
      {
        "number": "5",
        "name": "DRAIN",
        "type": "power_out",
        "description": "Drain of the internal 500 V power MOSFET (one of two paralleled DRAIN pins, 5 and 6). Connects to the switching node of the buck inductor. For the FM8502D variant, RDS(on) is ~3 Ω and peak drain current rating is 1100 mA @ TJ=100 °C. Increase copper area for thermal dissipation, but not excessively (EMI trade-off)."
      },
      {
        "number": "6",
        "name": "DRAIN",
        "type": "power_out",
        "description": "Drain of the internal 500 V power MOSFET (second of two paralleled DRAIN pins, 5 and 6). Tie to pin 5 at the switching node. Absolute max drain voltage -0.3 to 500 V."
      },
      {
        "number": "7",
        "name": "CS",
        "type": "input",
        "description": "Current sense input. External sense resistor Rcs from source of the internal MOSFET to GND; CS taps the top of Rcs. Peak-current comparator threshold Vcs_TH = 373 mV (365-381 mV), with 500 ns leading-edge blanking and 200 ns turn-off delay. LED current is Ipk/2 = 0.373 V / (2·Rcs). Absolute max -0.3 to 8 V."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2201121830_Shenzhen-Fuman-Elec-FM8502D_C2938797.pdf",
        "pages": 9,
        "sha256": "22da0f69a6eb4874",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "fm8502d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "4c9435ffd3683a4ae45655e397c25900eda4f6782a526780f4f7b7b99a32dca7",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "fm8502d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.4,
          4.9,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "dcb66a660f6358a858758665966e4c83732452ab4cf9600971a209d442b4d1a2",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Shenzhen Fuman",
      "Package": "SOP-7",
      "Category": "LED-drv",
      "Pins": "7"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "fm8502d"
  ],
  "discovery_pitch": "FM8502D (Shenzhen Fuman) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "fm8502d.kicad_sym",
    "fm8502d.kicad_mod",
    "fm8502d.glb",
    "fm8502d.step",
    "fm8502d.lbr",
    "docs/hero.png",
    "docs/fm8502d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "fm8502d-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "FM8502DD",
      "kind": "packaging"
    },
    {
      "mpn": "FM8502DDD",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T20:43:13.502Z"
}