component
FM2118
Public Made by Adomby adom
Shenzhen Fuman Battery Management ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
FM2118
Shenzhen Fuman · Battery Management ICs · SOT-23-6
FM2118 from Shenzhen Fuman, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OD | output | Gate connection for the discharge-control MOSFET; output high is VDD-0.02V typ, low is 0.1V typ (0.5V max). |
| 2 | CS | input | Overcurrent detection input and charger detection pin; high-voltage design with absolute maximum of VDD-20V to VDD+0.3V. |
| 3 | OC | output | Gate connection for the charge-control MOSFET; output high is VDD-0.02V typ, low is 0.1V typ (0.5V max), absolute maximum VDD-20V to VDD+0.3V. |
| 4 | NC | unconnected | No connection; left floating. |
| 5 | VDD | power_in | Positive power supply input; VDD-VSS operating voltage 1.5V to 8V, absolute maximum VSS+10V. |
| 6 | VSS | power_in | Ground pin and negative power supply input of the IC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD-VSS operating voltage | VDSOP1 | 1.5 | 8 | V | 3 | ||
| VDD-CS operating voltage | VDSOP2 | 1.5 | 20 | V | 3 | ||
| Operating current | IDD | 3 | 6 | uA | VDD=3.9V | 3 | |
| Standby current | IOD | 0.1 | uA | VDD=2.0V | 3 | ||
| Overcharge detection voltage (FM2118B column) | VCU | 4.4 | 4.425 | 4.45 | V | FM2118B | 3 |
| Overcharge release voltage | VCR | 4.175 | 4.225 | 4.275 | V | 3 | |
| Overdischarge detection voltage | VDL | 2.45 | 2.5 | 2.55 | V | overdischarge detection voltage | 3 |
| Overdischarge release voltage | VDR | 2.62 | 2.7 | 2.78 | V | 3 | |
| Discharge overcurrent detection voltage | VDIP | 120 | 150 | 180 | mV | VDD=3.6V | 3 |
| Charge overcurrent detection voltage | VCIP | -90 | -140 | -190 | mV | VDD=3.6V | 3 |
| Load short-circuit detection voltage | VSIP | 0.7 | 1 | 1.3 | V | VDD=3.0V | 3 |
| OD pin output low voltage | VDL | 0.1 | 0.5 | V | OD output low voltage | 3 | |
| OC pin output low voltage | VCL | 0.1 | 0.5 | V | 3 | ||
| Charger start voltage for 0V battery charging | V0CH | 1.2 | V | 0V battery charging function allowed | 3 | ||
| Overcharge detection delay time | TOC | 800 | 1200 | 1600 | ms | VDD=3.9V→4.5V | 3 |
| Overdischarge detection delay time | TOD | 70 | 145 | 190 | ms | VDD=3.6V→2.0V | 3 |
| Discharge overcurrent detection delay time | TDIP | 4 | 8 | 15 | ms | VDD=3.6V, CS=0.4V | 4 |
| Charge overcurrent detection delay time | TCIP | 4 | 8 | 15 | ms | VDD=3.6V, CS=0.4V | 4 |
| Load short-circuit detection delay time | TSIP | 200 | 300 | 400 | us | VDD=3.0V, CS=0.3V | 4 |
| Input voltage between VDD and VSS | VDD | -0.3 | 10 | V | VSS-0.3 to VSS+10, VSS=0V, TA=25°C | 2 | |
| OD output pin voltage | VOD | -0.3 | 0.3 | V | VSS-0.3 to VSS+0.3 | 2 | |
| Operating temperature range | TOP | -40 | 85 | °C | 2 | ||
| Storage temperature range | TST | -40 | 125 | °C | 2 | ||
| Permissible power dissipation | PD | 250 | mW | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
FM2118 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.19 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
fm2118-etched.step/fm2118-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm2118.step/fm2118.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (7 pp, sha256
78b8c40987e81362, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).