Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FM2118

Shenzhen Fuman · Battery Management ICs · SOT-23-6

FM2118 from Shenzhen Fuman, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 OD output Gate connection for the discharge-control MOSFET; output high is VDD-0.02V typ, low is 0.1V typ (0.5V max).
2 CS input Overcurrent detection input and charger detection pin; high-voltage design with absolute maximum of VDD-20V to VDD+0.3V.
3 OC output Gate connection for the charge-control MOSFET; output high is VDD-0.02V typ, low is 0.1V typ (0.5V max), absolute maximum VDD-20V to VDD+0.3V.
4 NC unconnected No connection; left floating.
5 VDD power_in Positive power supply input; VDD-VSS operating voltage 1.5V to 8V, absolute maximum VSS+10V.
6 VSS power_in Ground pin and negative power supply input of the IC.

Key specifications

Parameter Value
Manufacturer Shenzhen Fuman
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD-VSS operating voltage VDSOP1 1.5 8 V 3
VDD-CS operating voltage VDSOP2 1.5 20 V 3
Operating current IDD 3 6 uA VDD=3.9V 3
Standby current IOD 0.1 uA VDD=2.0V 3
Overcharge detection voltage (FM2118B column) VCU 4.4 4.425 4.45 V FM2118B 3
Overcharge release voltage VCR 4.175 4.225 4.275 V 3
Overdischarge detection voltage VDL 2.45 2.5 2.55 V overdischarge detection voltage 3
Overdischarge release voltage VDR 2.62 2.7 2.78 V 3
Discharge overcurrent detection voltage VDIP 120 150 180 mV VDD=3.6V 3
Charge overcurrent detection voltage VCIP -90 -140 -190 mV VDD=3.6V 3
Load short-circuit detection voltage VSIP 0.7 1 1.3 V VDD=3.0V 3
OD pin output low voltage VDL 0.1 0.5 V OD output low voltage 3
OC pin output low voltage VCL 0.1 0.5 V 3
Charger start voltage for 0V battery charging V0CH 1.2 V 0V battery charging function allowed 3
Overcharge detection delay time TOC 800 1200 1600 ms VDD=3.9V→4.5V 3
Overdischarge detection delay time TOD 70 145 190 ms VDD=3.6V→2.0V 3
Discharge overcurrent detection delay time TDIP 4 8 15 ms VDD=3.6V, CS=0.4V 4
Charge overcurrent detection delay time TCIP 4 8 15 ms VDD=3.6V, CS=0.4V 4
Load short-circuit detection delay time TSIP 200 300 400 us VDD=3.0V, CS=0.3V 4
Input voltage between VDD and VSS VDD -0.3 10 V VSS-0.3 to VSS+10, VSS=0V, TA=25°C 2
OD output pin voltage VOD -0.3 0.3 V VSS-0.3 to VSS+0.3 2
Operating temperature range TOP -40 85 °C 2
Storage temperature range TST -40 125 °C 2
Permissible power dissipation PD 250 mW 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: FM2118
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.19 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: fm2118-etched.step / fm2118-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm2118.step / fm2118.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Fuman datasheet (7 pp, sha256 78b8c40987e81362, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF