main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs fin1019mtcx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers fin1019mtcx: viewers · Ray
fin1019mtcx-etched.fit.json fin1019mtcx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fin1019mtcx-etched.glb fin1019mtcx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fin1019mtcx-etched.step fin1019mtcx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
fin1019mtcx.glb Publish 0.1.0 · Ray
fin1019mtcx.kicad_mod Publish 0.1.0 · Ray
fin1019mtcx.kicad_sym Publish 0.1.0 · Ray
fin1019mtcx.lbr Publish 0.1.0 · Ray
fin1019mtcx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json fin1019mtcx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md fin1019mtcx: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

FIN1019MTCX

onsemi · LVDS ICs · TSSOP-14

FIN1019MTCX from onsemi, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DE input Driver Enable (LVTTL, active HIGH). When HIGH, the LVDS driver outputs DOUT+/DOUT- are enabled; when LOW, the outputs are placed in a high-impedance state.
2 DIN input LVTTL Data Input to the differential driver. VIH ≥ 2.0V, VIL ≤ 0.8V, input current ±20 µA max.
3 NC unconnected No Connect. Leave floating.
4 ROUT output LVTTL Receiver Output. Drives LVTTL logic levels (VOH ≥ VCC−0.2V @ −100 µA, VOL ≤ 0.2V @ 100 µA); can source/sink up to 16 mA.
5 NC unconnected No Connect. Leave floating.
6 NC unconnected No Connect. Leave floating.
7 GND power_in Ground reference for both the LVDS driver and receiver blocks.
8 RE input Receiver Enable (LVTTL, active LOW). When LOW, the LVTTL receiver output ROUT is enabled; when HIGH, ROUT enters a high-impedance state.
9 RIN- input Inverting LVDS Input to the receiver. Differential input threshold
10 RIN+ input Non-Inverting LVDS Input to the receiver. Differential input threshold
11 DOUT- output Inverting LVDS driver output. Typical differential swing 350 mV (250-450 mV) into 100 Ω load; offset voltage ~1.25V.
12 DOUT+ output Non-Inverting LVDS driver output. Typical differential swing 350 mV (250-450 mV) into 100 Ω load; offset voltage ~1.25V.
13 NC unconnected No Connect. Leave floating.
14 VCC power_in Positive supply, 3.0V to 3.6V (nominal 3.3V). Supply current ICC ≤ 12.5 mA with driver enabled, ≤ 7.0 mA with driver disabled.

Key specifications

Parameter Value
Manufacturer onsemi
Package TSSOP-14
Category Interface
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • FIN1019MTCX

CAD (KiCad official)

  • Symbol: FIN1019MTCX
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: fin1019mtcx-etched.step / fin1019mtcx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fin1019mtcx.step / fin1019mtcx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 4431530bb10ccfd2, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF