component
FIN1019MTCX
Public Made by Adomby adom
onsemi LVDS ICs, TSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownFIN1019MTCX
onsemi · LVDS ICs · TSSOP-14
FIN1019MTCX from onsemi, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DE | input | Driver Enable (LVTTL, active HIGH). When HIGH, the LVDS driver outputs DOUT+/DOUT- are enabled; when LOW, the outputs are placed in a high-impedance state. |
| 2 | DIN | input | LVTTL Data Input to the differential driver. VIH ≥ 2.0V, VIL ≤ 0.8V, input current ±20 µA max. |
| 3 | NC | unconnected | No Connect. Leave floating. |
| 4 | ROUT | output | LVTTL Receiver Output. Drives LVTTL logic levels (VOH ≥ VCC−0.2V @ −100 µA, VOL ≤ 0.2V @ 100 µA); can source/sink up to 16 mA. |
| 5 | NC | unconnected | No Connect. Leave floating. |
| 6 | NC | unconnected | No Connect. Leave floating. |
| 7 | GND | power_in | Ground reference for both the LVDS driver and receiver blocks. |
| 8 | RE | input | Receiver Enable (LVTTL, active LOW). When LOW, the LVTTL receiver output ROUT is enabled; when HIGH, ROUT enters a high-impedance state. |
| 9 | RIN- | input | Inverting LVDS Input to the receiver. Differential input threshold |
| 10 | RIN+ | input | Non-Inverting LVDS Input to the receiver. Differential input threshold |
| 11 | DOUT- | output | Inverting LVDS driver output. Typical differential swing 350 mV (250-450 mV) into 100 Ω load; offset voltage ~1.25V. |
| 12 | DOUT+ | output | Non-Inverting LVDS driver output. Typical differential swing 350 mV (250-450 mV) into 100 Ω load; offset voltage ~1.25V. |
| 13 | NC | unconnected | No Connect. Leave floating. |
| 14 | VCC | power_in | Positive supply, 3.0V to 3.6V (nominal 3.3V). Supply current ICC ≤ 12.5 mA with driver enabled, ≤ 7.0 mA with driver disabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-14 |
| Category | Interface |
| Pins | 14 |
Ordering variants
Same part, different packaging or reel option.
FIN1019MTCX
CAD (KiCad official)
- Symbol:
FIN1019MTCX - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
fin1019mtcx-etched.step/fin1019mtcx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fin1019mtcx.step/fin1019mtcx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
4431530bb10ccfd2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).