component
FH8208C
Public Made by Adomby adom
XIN FEI HONG Battery Management ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
9485c26
FH8208C
XIN FEI HONG · Battery Management ICs · SOT-23-5
FH8208C from XIN FEI HONG, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin with no internal function stated in the datasheet. |
| 2 | GND | power_in | Chip ground, connected to the negative terminal of the battery cell. |
| 3 | VDD | power_in | Power supply pin, recommended 0 to 6.0 V between VDD and GND (absolute max 8.0 V), connected to battery positive through a 470 Ω resistor with 0.1 µF capacitor to GND. |
| 4 | VM | bidirectional | Charger negative voltage input (shared with pin 5), recommended -6.0 to 6.0 V relative to GND, with internal pull-up and pull-down currents and the internal MOSFET between VM and GND. |
| 5 | VM | bidirectional | Charger negative voltage input (shared with pin 4), recommended -6.0 to 6.0 V relative to GND, with internal pull-up and pull-down currents and the internal MOSFET between VM and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XIN FEI HONG |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Overcharge detection voltage | VOCV | 4.25 | 4.3 | 4.35 | V | 4 | |
| Overcharge release voltage | VOCR | 4.05 | 4.15 | 4.25 | V | 4 | |
| Overdischarge detection voltage | VODV | 2.35 | 2.45 | 2.55 | V | 4 | |
| Overdischarge release voltage | VODR | 2.9 | 3 | 3.1 | V | 4 | |
| Overcurrent detection 1 | IOCI1 | 3 | 3.8 | 5.2 | A | 4 | |
| Overcurrent detection 2 | IOCI2 | 5 | 7 | 9 | A | 4 | |
| Short-circuit current detection | ISHORT | 8 | 11 | 14 | A | 4 | |
| Charge current detection | ICHA | 2.8 | 3.8 | 5.5 | A | 4 | |
| Operating current | IOPE | 2.6 | 5 | μA | VM floating | 4 | |
| Power-down current | IPDN | 0.6 | 1 | μA | VDD=2V | 4 | |
| VM to GND on-resistance | RDS(ON) | 40 | 48 | 58 | mΩ | IVM=1.0A | 4 |
| Overcharge detection delay | TOCV | 30 | 100 | 300 | mS | 4 | |
| Overdischarge detection delay | TODV | 30 | 100 | 300 | mS | 4 | |
| Overcurrent 1 detection delay | TIOV1 | 5 | 20 | 60 | mS | 4 | |
| Overcurrent 2 detection delay | TIOV2 | 1 | 2.5 | 7.5 | mS | 4 | |
| Short-circuit detection delay | TSHORT | 50 | 150 | 450 | uS | 4 | |
| Supply voltage (VDD-GND), absolute maximum | VDD | -0.3 | 8 | V | 3 | ||
| Charger input voltage (VM-GND), absolute maximum | VM | -8 | 11 | V | 3 | ||
| Storage temperature, absolute maximum | TSTG | -55 | 145 | °C | 3 | ||
| Junction temperature, absolute maximum | TJ | -40 | 145 | °C | 3 | ||
| Power dissipation | PMAX | 400 | mW | T=25°C | 3 | ||
| ESD HBM | ESD | 4000 | V | HBM | 3 | ||
| Supply voltage (VDD-GND), recommended | VDD | 0 | 6 | V | 3 | ||
| Charger input voltage (VM-GND), recommended | VM | -6 | 6 | V | 3 | ||
| Storage temperature, recommended | TSTG | -40 | 85 | °C | 3 | ||
| Internal pull-up current | IPU | 12 | μA | 4 | |||
| Internal pull-down current | IPD | 16 | μA | VM=1.0V | 4 | ||
| Thermal shutdown detection temperature | TSHD | 155 | ℃ | 4 | |||
| Thermal shutdown release temperature | TSHR | 120 | ℃ | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
FH8208C - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
fh8208c-etched.step/fh8208c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fh8208c.step/fh8208c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XIN FEI HONG datasheet (9 pp, sha256
ea973cd60eac395d, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# FH8208C
**XIN FEI HONG** · Battery Management ICs · SOT-23-5
FH8208C from XIN FEI HONG, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin with no internal function stated in the datasheet. |
| 2 | GND | power_in | Chip ground, connected to the negative terminal of the battery cell. |
| 3 | VDD | power_in | Power supply pin, recommended 0 to 6.0 V between VDD and GND (absolute max 8.0 V), connected to battery positive through a 470 Ω resistor with 0.1 µF capacitor to GND. |
| 4 | VM | bidirectional | Charger negative voltage input (shared with pin 5), recommended -6.0 to 6.0 V relative to GND, with internal pull-up and pull-down currents and the internal MOSFET between VM and GND. |
| 5 | VM | bidirectional | Charger negative voltage input (shared with pin 4), recommended -6.0 to 6.0 V relative to GND, with internal pull-up and pull-down currents and the internal MOSFET between VM and GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XIN FEI HONG |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Overcharge detection voltage | VOCV | 4.25 | 4.3 | 4.35 | V | | 4 |
| Overcharge release voltage | VOCR | 4.05 | 4.15 | 4.25 | V | | 4 |
| Overdischarge detection voltage | VODV | 2.35 | 2.45 | 2.55 | V | | 4 |
| Overdischarge release voltage | VODR | 2.9 | 3 | 3.1 | V | | 4 |
| Overcurrent detection 1 | IOCI1 | 3 | 3.8 | 5.2 | A | | 4 |
| Overcurrent detection 2 | IOCI2 | 5 | 7 | 9 | A | | 4 |
| Short-circuit current detection | ISHORT | 8 | 11 | 14 | A | | 4 |
| Charge current detection | ICHA | 2.8 | 3.8 | 5.5 | A | | 4 |
| Operating current | IOPE | | 2.6 | 5 | μA | VM floating | 4 |
| Power-down current | IPDN | | 0.6 | 1 | μA | VDD=2V | 4 |
| VM to GND on-resistance | RDS(ON) | 40 | 48 | 58 | mΩ | IVM=1.0A | 4 |
| Overcharge detection delay | TOCV | 30 | 100 | 300 | mS | | 4 |
| Overdischarge detection delay | TODV | 30 | 100 | 300 | mS | | 4 |
| Overcurrent 1 detection delay | TIOV1 | 5 | 20 | 60 | mS | | 4 |
| Overcurrent 2 detection delay | TIOV2 | 1 | 2.5 | 7.5 | mS | | 4 |
| Short-circuit detection delay | TSHORT | 50 | 150 | 450 | uS | | 4 |
| Supply voltage (VDD-GND), absolute maximum | VDD | -0.3 | | 8 | V | | 3 |
| Charger input voltage (VM-GND), absolute maximum | VM | -8 | | 11 | V | | 3 |
| Storage temperature, absolute maximum | TSTG | -55 | | 145 | °C | | 3 |
| Junction temperature, absolute maximum | TJ | -40 | | 145 | °C | | 3 |
| Power dissipation | PMAX | | | 400 | mW | T=25°C | 3 |
| ESD HBM | ESD | | | 4000 | V | HBM | 3 |
| Supply voltage (VDD-GND), recommended | VDD | 0 | | 6 | V | | 3 |
| Charger input voltage (VM-GND), recommended | VM | -6 | | 6 | V | | 3 |
| Storage temperature, recommended | TSTG | -40 | | 85 | °C | | 3 |
| Internal pull-up current | IPU | | 12 | | μA | | 4 |
| Internal pull-down current | IPD | | 16 | | μA | VM=1.0V | 4 |
| Thermal shutdown detection temperature | TSHD | | 155 | | ℃ | | 4 |
| Thermal shutdown release temperature | TSHR | | 120 | | ℃ | | 4 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `FH8208C`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `fh8208c-etched.step` / `fh8208c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `fh8208c.step` / `fh8208c.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [XIN FEI HONG datasheet](docs/fh8208c-datasheet.pdf) (9 pp, sha256 `ea973cd60eac395d`, retrieved 2026-11-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/fh8208c-datasheet.pdf)