Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

FH8208C

XIN FEI HONG · Battery Management ICs · SOT-23-5

FH8208C from XIN FEI HONG, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin with no internal function stated in the datasheet.
2 GND power_in Chip ground, connected to the negative terminal of the battery cell.
3 VDD power_in Power supply pin, recommended 0 to 6.0 V between VDD and GND (absolute max 8.0 V), connected to battery positive through a 470 Ω resistor with 0.1 µF capacitor to GND.
4 VM bidirectional Charger negative voltage input (shared with pin 5), recommended -6.0 to 6.0 V relative to GND, with internal pull-up and pull-down currents and the internal MOSFET between VM and GND.
5 VM bidirectional Charger negative voltage input (shared with pin 4), recommended -6.0 to 6.0 V relative to GND, with internal pull-up and pull-down currents and the internal MOSFET between VM and GND.

Key specifications

Parameter Value
Manufacturer XIN FEI HONG
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Overcharge detection voltage VOCV 4.25 4.3 4.35 V 4
Overcharge release voltage VOCR 4.05 4.15 4.25 V 4
Overdischarge detection voltage VODV 2.35 2.45 2.55 V 4
Overdischarge release voltage VODR 2.9 3 3.1 V 4
Overcurrent detection 1 IOCI1 3 3.8 5.2 A 4
Overcurrent detection 2 IOCI2 5 7 9 A 4
Short-circuit current detection ISHORT 8 11 14 A 4
Charge current detection ICHA 2.8 3.8 5.5 A 4
Operating current IOPE 2.6 5 μA VM floating 4
Power-down current IPDN 0.6 1 μA VDD=2V 4
VM to GND on-resistance RDS(ON) 40 48 58 mΩ IVM=1.0A 4
Overcharge detection delay TOCV 30 100 300 mS 4
Overdischarge detection delay TODV 30 100 300 mS 4
Overcurrent 1 detection delay TIOV1 5 20 60 mS 4
Overcurrent 2 detection delay TIOV2 1 2.5 7.5 mS 4
Short-circuit detection delay TSHORT 50 150 450 uS 4
Supply voltage (VDD-GND), absolute maximum VDD -0.3 8 V 3
Charger input voltage (VM-GND), absolute maximum VM -8 11 V 3
Storage temperature, absolute maximum TSTG -55 145 °C 3
Junction temperature, absolute maximum TJ -40 145 °C 3
Power dissipation PMAX 400 mW T=25°C 3
ESD HBM ESD 4000 V HBM 3
Supply voltage (VDD-GND), recommended VDD 0 6 V 3
Charger input voltage (VM-GND), recommended VM -6 6 V 3
Storage temperature, recommended TSTG -40 85 °C 3
Internal pull-up current IPU 12 μA 4
Internal pull-down current IPD 16 μA VM=1.0V 4
Thermal shutdown detection temperature TSHD 155 ℃ 4
Thermal shutdown release temperature TSHR 120 ℃ 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: FH8208C
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: fh8208c-etched.step / fh8208c-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fh8208c.step / fh8208c.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XIN FEI HONG datasheet (9 pp, sha256 ea973cd60eac395d, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF