component
FGH200MAAMD
Public Made by Adomby adom
Quectel FGH200MAAMD (FGH200M) Wi-Fi HaLow IEEE 802.11ah module on the Morse Micro MM8108, 850 to 950 MHz, SDIO 2.0 / SPI and USB 2.0, 11.0 x 10.0 x 2.0 mm 38-pad LGA. Preliminary data. KiCad symbol, footprint, Fusion library and 3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434
{
"schema_version": 1,
"type": "component",
"slug": "fgh200maamd",
"title": "FGH200MAAMD",
"brief": "Quectel FGH200MAAMD (FGH200M) Wi-Fi HaLow IEEE 802.11ah module on the Morse Micro MM8108, 850 to 950 MHz, SDIO 2.0 / SPI and USB 2.0, 11.0 x 10.0 x 2.0 mm 38-pad LGA. Preliminary data. KiCad symbol, footprint, Fusion library and 3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"wifi",
"wi-fi halow",
"802.11ah",
"sub-ghz",
"module",
"lga",
"quectel",
"morse micro",
"mm8108",
"fgh200m",
"fgh200maamd"
],
"component": {
"mpn": "FGH200MAAMD",
"manufacturer": "Quectel",
"package": "LGA-38, 11.0 x 10.0 x 2.0 mm, 1.0 mm pitch",
"pin_count": 38,
"category": "RF / Wireless",
"subcategory": "Wi-Fi HaLow (IEEE 802.11ah) modules",
"body_size": {
"x_mm": 11,
"y_mm": 10,
"z_mm": 2,
"pitch_mm": 1
},
"datasheet": "https://fccid.io/XMR2025FGH200M/User-Manual/User-Manual-9080131",
"parts": {
"symbol": "fgh200maamd.kicad_sym",
"footprint": "fgh200maamd.kicad_mod",
"model_3d": "fgh200maamd-hero.glb",
"model_3d_plain": "fgh200maamd-etched.glb",
"model_3d_step": "fgh200maamd-etched.step",
"model_3d_step_plain": "fgh200maamd.step",
"lbr": "fgh200maamd.lbr"
},
"distributor_links": {
"mouser": {
"part": "277-FGH200MAAMD",
"url": "https://www.mouser.com/en/ProductDetail/Quectel/FGH200MAAMD?qs=Omd18uQ5iJG9o7b35HrJAQ%3D%3D"
},
"digikey": {
"part": "2958-FGH200MAAMDTR-ND",
"url": "https://www.digikey.com/en/products/detail/quectel/FGH200MAAMD/29288369"
},
"lcsc": false,
"lcsc_note": "2026-10-17: no LCSC/JLCPCB listing found for FGH200MAAMD (adom-parts-search)."
},
"pins": [
{
"number": "1",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "2",
"name": "ANT_WIFI",
"type": "passive",
"description": "Wi-Fi HaLow antenna interface, 50 ohm (AIO). Route as a 50 ohm line to the antenna or an RF connector; Quectel shows a pi matching network (series 0 ohm, two shunt positions not mounted) and an optional DC block."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "4",
"name": "RESET_N",
"type": "input",
"description": "Reset the module, active low (DI)"
},
{
"number": "5",
"name": "WAKEUP_IN",
"type": "input",
"description": "Wake up the module (DI). Quectel's text puts it in the VDD_IO domain and, if power saving is unused, pulls it up through 10 kohm to VDD_IO (its figures show VBAT)."
},
{
"number": "6",
"name": "JTAG_TMS",
"type": "input",
"description": "JTAG test mode select. Quectel: external 10 kohm pull-down."
},
{
"number": "7",
"name": "JTAG_TCK",
"type": "input",
"description": "JTAG test clock. Quectel: external 10 kohm pull-down."
},
{
"number": "8",
"name": "JTAG_TDO",
"type": "output",
"description": "JTAG test data output"
},
{
"number": "9",
"name": "JTAG_TDI",
"type": "input",
"description": "JTAG test data input. Quectel: external 10 kohm pull-down."
},
{
"number": "10",
"name": "VBAT",
"type": "power_in",
"description": "Module power supply, 3.0 V to 3.6 V (3.3 V typ), at least 0.5 A capability. Quectel shows 10 uF + 100 nF."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "12",
"name": "SDIO_DATA0",
"type": "bidirectional",
"description": "SDIO data 0 / SPI MISO. Quectel: 10 kohm to 100 kohm (47 kohm recommended) pull-up to VDD_IO."
},
{
"number": "13",
"name": "SDIO_DATA3",
"type": "bidirectional",
"description": "SDIO data 3 / SPI CS. Quectel: 47 kohm pull-up to VDD_IO."
},
{
"number": "14",
"name": "SDIO_DATA1",
"type": "bidirectional",
"description": "SDIO data 1 / SPI interrupt. Quectel: 47 kohm pull-up to VDD_IO."
},
{
"number": "15",
"name": "SDIO_DATA2",
"type": "bidirectional",
"description": "SDIO data 2. Quectel: 47 kohm pull-up to VDD_IO (also in SPI mode)."
},
{
"number": "16",
"name": "SDIO_CMD",
"type": "bidirectional",
"description": "SDIO command / SPI MOSI. Quectel: 47 kohm pull-up to VDD_IO."
},
{
"number": "17",
"name": "SDIO_CLK",
"type": "input",
"description": "SDIO clock / SPI clock. No pull-up."
},
{
"number": "18",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "19",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "20",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "21",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "22",
"name": "VDD_IO",
"type": "power_in",
"description": "I/O power supply, 2.25 V to 3.6 V per the electrical table (the pin table says 3.0 V to 3.6 V), 3.3 V typ; must not exceed VBAT. Quectel shows 100 nF."
},
{
"number": "23",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "24",
"name": "VBAT_TX",
"type": "power_in",
"description": "RF power amplifier supply, 3.0 V to 3.6 V (3.3 V typ), at least 1.0 A capability. Quectel shows 10 uF + 100 nF."
},
{
"number": "25",
"name": "VDD_USB",
"type": "power_in",
"description": "USB supply, 3.0 V to 3.6 V (3.3 V typ). Quectel shows 10 uF + 100 nF."
},
{
"number": "26",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "27",
"name": "USB_DM",
"type": "bidirectional",
"description": "USB 2.0 D- (90 ohm differential). Leave open when the SDIO/SPI host interface is used."
},
{
"number": "28",
"name": "USB_DP",
"type": "bidirectional",
"description": "USB 2.0 D+ (90 ohm differential). Leave open when the SDIO/SPI host interface is used."
},
{
"number": "29",
"name": "GPIO2/BUSY",
"type": "output",
"description": "GPIO2. In power-saving mode this is the BUSY output to the host (CMOS input). Quectel's figures show a 10 kohm pull-down when unused."
},
{
"number": "30",
"name": "GND",
"type": "power_in",
"description": "Ground"
},
{
"number": "31",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "32",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "33",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "34",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "35",
"name": "GPIO8",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "36",
"name": "GPIO9",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "37",
"name": "GPIO10",
"type": "bidirectional",
"description": "General-purpose I/O. Quectel: pull down through 10 kohm if unused."
},
{
"number": "38",
"name": "GND",
"type": "power_in",
"description": "Ground"
}
],
"provenance": {
"file": "provenance/provenance.json",
"datasheet": {
"url": "https://fccid.io/XMR2025FGH200M/User-Manual/User-Manual-9080131",
"source_tier": "mfr"
},
"cad": "Symbol and footprint drawn by Adom from the manufacturer documents; 3D model built by Adom from the datasheet drawing (AI-created)",
"pins": {
"total": 38,
"described": 38,
"cites_pages": true
}
},
"manufacturer_links": {
"product": "https://www.quectel.com/product/wi-fi-halow-fgh200m/",
"datasheet": "https://fccid.io/XMR2025FGH200M/User-Manual/User-Manual-9080131"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models": "models.json",
"models_3d": [
{
"file": "fgh200maamd.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = body centre",
"seat": "z = 0 (terminal underside on the PCB top)",
"extents_mm": [
11,
10,
2
],
"zmin_mm": 0,
"footprint_binding": "identity",
"classification": "AI-created",
"sha256": "d43972f0a658bc20d36ae72328c9f02f85afb77d63541131aea983ba84317f25",
"checked": "2026-10-17",
"checked_by": "step2glb features (bbox, floor) + component-hero align guard"
},
{
"file": "fgh200maamd-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = body centre",
"seat": "z = 0 (terminal underside on the PCB top)",
"extents_mm": [
11,
10,
2
],
"zmin_mm": 0,
"footprint_binding": "identity",
"classification": "AI-created",
"sha256": "39e3fad42037cb45cc54bf04d452f4678b22ae28bd67707860ee54037a54a30b",
"checked": "2026-10-17",
"checked_by": "step2glb features (bbox, floor) + component-hero align guard"
}
],
"status": "preliminary"
},
"metadata": {
"specs": {
"Manufacturer": "Quectel",
"Package": "LGA-38, 11.0 x 10.0 x 2.0 mm, 1.0 mm pitch",
"Standard": "IEEE 802.11ah (Wi-Fi HaLow), 1x1, AP / STA",
"Chipset": "Morse Micro MM8108",
"Frequency band": "850 MHz to 950 MHz, 1/2/4/8 MHz channels",
"Max output power": "26 dBm (Quectel spec); FCC grant 0.9311 W conducted max, 908 to 924 MHz",
"Max PHY rate": "43.3 Mbps",
"Host interfaces": "SDIO 2.0 / SPI x1, USB 2.0 x1",
"VBAT / VBAT_TX": "3.0 V to 3.6 V, 3.3 V typ",
"VDD_IO": "2.25 V to 3.6 V, 3.3 V typ",
"Operating temperature": "-40 C to +85 C",
"Size / weight": "11.0 x 10.0 x 2.0 mm, about 0.51 g",
"RF sensitivity / TX power per MCS": "TBD in the preliminary documents"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"FGH200MAAMD",
"fgh200maamd",
"FGH200M",
"Quectel FGH200M",
"Wi-Fi HaLow module",
"802.11ah module",
"MM8108 module"
],
"discovery_pitch": "FGH200MAAMD (Quectel) component page: pinout, KiCad symbol, footprint, Fusion library and 3D with per-file provenance.",
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"LICENSE",
"models.json",
"fgh200maamd.kicad_sym",
"fgh200maamd.kicad_mod",
"fgh200maamd.lbr",
"fgh200maamd.step",
"fgh200maamd.glb",
"fgh200maamd-etched.step",
"fgh200maamd-etched.glb",
"fgh200maamd-hero.glb",
"fgh200maamd-hero.overlay.json",
"docs/hero.png",
"viewers/symbol.html",
"viewers/footprint.html",
"provenance/provenance.json",
"provenance/fgh200maamd-features.json",
"provenance/fgh200maamd-etched.mark-plan.json",
"provenance/fgh200maamd-etched.check.json",
"provenance/fgh200maamd-etched.check.png",
"docs/models/fgh200maamd-etched.step.bottom.png",
"docs/models/fgh200maamd-etched.step.png",
"docs/models/fgh200maamd-hero.glb.png",
"docs/models/fgh200maamd.step.bottom.png",
"docs/models/fgh200maamd.step.png"
],
"visibility": {
"public": true
},
"source": {
"tool": "quectel",
"url": "https://www.quectel.com/product/wi-fi-halow-fgh200m/"
},
"updated_at": "2026-10-17T19:10:39.690Z",
"author": {
"name": "Adom"
},
"authors": [
{
"name": "Adom"
}
]
}