main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers f35sqb004g-wwt: viewers · Ray
f35sqb004g-wwt-etched.glb Publish 0.1.0 · Ray
f35sqb004g-wwt-etched.step f35sqb004g-wwt: factory component page (tier=lcsc) · Ray
f35sqb004g-wwt-hero.glb f35sqb004g-wwt: hero GLB from the etched model (keeps the MPN mark) · Ray
f35sqb004g-wwt-hero.overlay.json Publish 0.1.0 · Ray
f35sqb004g-wwt.glb Publish 0.1.0 · Ray
f35sqb004g-wwt.kicad_mod Publish 0.1.0 · Ray
f35sqb004g-wwt.kicad_sym Publish 0.1.0 · Ray
f35sqb004g-wwt.lbr Publish 0.1.0 · Ray
f35sqb004g-wwt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

F35SQB004G-WWT

FORESEE · NAND FLASH · WSON-8(6x8)

F35SQB004G-WWT from FORESEE, in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Active-low chip select: high deselects device (DO/SIO0-3 high-Z, standby current); low selects device (active power, instructions accepted); must transition high-to-low after power-up before first instruction.
2 DO/SIO1 bidirectional Serial Data Output in standard SPI (data shifted out on falling CLK edge); bidirectional SIO1 in Dual and Quad SPI for read/write at 2× or 4× data rate.
3 WP#/SIO2 bidirectional Active-low Write Protect input: prevents Status Register writes when low, used with BP3-0/TB and BPRWD/SP bits to hardware-protect up to the entire 512 MB array; becomes bidirectional SIO2 data pin during Quad SPI commands (QE=1).
4 GND power_in Ground reference for all device signals and internal logic.
5 DI/SIO0 bidirectional Serial Data Input in standard SPI (instructions, addresses, and data clocked in on rising CLK edge); bidirectional SIO0 in Dual and Quad SPI for read/write at 2× or 4× data rate.
6 CLK input Serial Clock input providing timing for all serial input and output operations; supports SPI Mode 0 (CPOL=0, CPHA=0) and Mode 3 (CPOL=1, CPHA=1) up to 166 MHz.
7 HOLD#/SIO3 bidirectional Active-low Hold input (Standard/Dual SPI): pauses device while CS# is low by driving DO to high-Z and ignoring DI/CLK; becomes bidirectional SIO3 data pin during Quad SPI commands (QE=1), disabling Hold function.
8 VCC power_in Power supply pin; operating range 2.7 V to 3.6 V; standby current 10 µA (typ.), page read current 10 mA (typ.), program/erase current 15 mA (typ.).
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer FORESEE
Package WSON-8(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 2.7 3.6 V 41
Ambient Temperature Industrial TA -40 85 °C Industrial 41
Ambient Temperature Industrial plus TA -40 105 °C Industrial plus 41
Supply Voltage VCC -0.6 4.6 V 41
Voltage Applied to Any Pin VIO -0.6 V Printed range -0.6 to VCC+0.4 41
Temperature under Bias TBIAS -40 125 °C 41
Storage Temperature TSTG -65 150 °C 41
Short circuit output current, I/Os IOS 5 mA 41
Valid block number NVB 2008 2048 Blocks 37
Standby Current ICC1 10 50 µA CS# = VCC, VIN = GND or VCC 43
Page Read Current ICC2 10 25 mA 43
Program Current ICC3 15 25 mA 43
Erase Current ICC4 15 25 mA 43
Input Leakage Current ILI -2 2 µA 43
Output Leakage Current ILO -2 2 µA 43
Input Low Voltage VIL -0.3 V Printed max 0.2VCC 43
Output Low Voltage VOL 0.4 V IOL = 2.1mA 43
Output High Voltage VOH 2.4 V IOH = -400µA 43
Input / Output Capacitance CIO 8 pF TA=25°C, F=1MHz, VIN=0V, VCC=3V 42
Input Capacitance CIN 8 pF TA=25°C, F=1MHz, VIN=0V, VCC=3V 42
Load Capacitance CL 30 pF 43
Input Rise Time tR 2.5 ns 43
Input Fall Time tF 2.5 ns 43
Clock frequency FR 166 MHz 43
Clock High, Low Time for all commands tCLH, tCLL 2.7 ns 43
Clock Rise Time tCLCH 0.1 V/ns 43
Clock Fall Time tCHCL 0.1 V/ns 43
Data In Setup Time tDVCH 2 ns 43
Data In Hold Time tCHDX 3 ns 44
Clock Low to Output Valid tCLQV 5 ns 44
Output Hold Time tCLQX 1 ns 44
Output Disable Time tSHQZ 20 ns 44
CS# active Setup Time tSLCH 5 ns 44
CS# active Hold Time tCHSH 5 ns 44
CS# non-active Setup Time tSHCH 5 ns 44
CS# non-active Hold Time tCHSL 5 ns 44
CS# deselect Time tSHSL 20 ns 44
HOLD# active Setup Time tHLCH 5 ns 44
HOLD# active Hold Time tCHHH 5 ns 44
HOLD# non-active Setup Time tHHCH 5 ns 44
HOLD# non-active Hold Time tCHHL 5 ns 44
HOLD# to Output Low-Z tHHQX 15 ns 44
HOLD# to Output High-Z tHLQZ 15 ns 44
WP# Setup Time before CS# Low tWHSL 20 ns 44
WP# Hold Time after CS# Low tSHWL 100 ns 44
Power-up: VCC(min) to read Status Register is allowed tVSL 200 µs 41
Time delay before device fully accessible tPUW 1 ms 41
Data Transfer from Cell to Data Register tRD 25 s 44
Data Transfer from Cell to Data Register with internal ECC enabled tRD_ECC 95 105 s 44
Program Time tPROG 350 770 s 44
Program Time with internal ECC enabled tPROG_ECC 450 830 s 44
Block Erase Time tERS 2 10 ms 44
Number of Partial Program Cycles NOP 1 cycles 44

CAD (KiCad official)

  • Symbol: F35SQB004G-WWT
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8(6x8) (KiCad packages3D, STEP)
  • 3D model files: f35sqb004g-wwt-etched.step / f35sqb004g-wwt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f35sqb004g-wwt.step / f35sqb004g-wwt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FORESEE datasheet (48 pp, sha256 05356b0c3ea1979f, retrieved 2026-11-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF