component
F35SQB004G-WWT
Public Made by Adomby adom
FORESEE NAND FLASH, WSON-8(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownF35SQB004G-WWT
FORESEE · NAND FLASH · WSON-8(6x8)
F35SQB004G-WWT from FORESEE, in a WSON-8(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Active-low chip select: high deselects device (DO/SIO0-3 high-Z, standby current); low selects device (active power, instructions accepted); must transition high-to-low after power-up before first instruction. |
| 2 | DO/SIO1 | bidirectional | Serial Data Output in standard SPI (data shifted out on falling CLK edge); bidirectional SIO1 in Dual and Quad SPI for read/write at 2× or 4× data rate. |
| 3 | WP#/SIO2 | bidirectional | Active-low Write Protect input: prevents Status Register writes when low, used with BP3-0/TB and BPRWD/SP bits to hardware-protect up to the entire 512 MB array; becomes bidirectional SIO2 data pin during Quad SPI commands (QE=1). |
| 4 | GND | power_in | Ground reference for all device signals and internal logic. |
| 5 | DI/SIO0 | bidirectional | Serial Data Input in standard SPI (instructions, addresses, and data clocked in on rising CLK edge); bidirectional SIO0 in Dual and Quad SPI for read/write at 2× or 4× data rate. |
| 6 | CLK | input | Serial Clock input providing timing for all serial input and output operations; supports SPI Mode 0 (CPOL=0, CPHA=0) and Mode 3 (CPOL=1, CPHA=1) up to 166 MHz. |
| 7 | HOLD#/SIO3 | bidirectional | Active-low Hold input (Standard/Dual SPI): pauses device while CS# is low by driving DO to high-Z and ignoring DI/CLK; becomes bidirectional SIO3 data pin during Quad SPI commands (QE=1), disabling Hold function. |
| 8 | VCC | power_in | Power supply pin; operating range 2.7 V to 3.6 V; standby current 10 µA (typ.), page read current 10 mA (typ.), program/erase current 15 mA (typ.). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FORESEE |
| Package | WSON-8(6x8) |
| Category | Memory |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | 3.6 | V | 41 | ||
| Ambient Temperature Industrial | TA | -40 | 85 | °C | Industrial | 41 | |
| Ambient Temperature Industrial plus | TA | -40 | 105 | °C | Industrial plus | 41 | |
| Supply Voltage | VCC | -0.6 | 4.6 | V | 41 | ||
| Voltage Applied to Any Pin | VIO | -0.6 | V | Printed range -0.6 to VCC+0.4 | 41 | ||
| Temperature under Bias | TBIAS | -40 | 125 | °C | 41 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 41 | ||
| Short circuit output current, I/Os | IOS | 5 | mA | 41 | |||
| Valid block number | NVB | 2008 | 2048 | Blocks | 37 | ||
| Standby Current | ICC1 | 10 | 50 | µA | CS# = VCC, VIN = GND or VCC | 43 | |
| Page Read Current | ICC2 | 10 | 25 | mA | 43 | ||
| Program Current | ICC3 | 15 | 25 | mA | 43 | ||
| Erase Current | ICC4 | 15 | 25 | mA | 43 | ||
| Input Leakage Current | ILI | -2 | 2 | µA | 43 | ||
| Output Leakage Current | ILO | -2 | 2 | µA | 43 | ||
| Input Low Voltage | VIL | -0.3 | V | Printed max 0.2VCC | 43 | ||
| Output Low Voltage | VOL | 0.4 | V | IOL = 2.1mA | 43 | ||
| Output High Voltage | VOH | 2.4 | V | IOH = -400µA | 43 | ||
| Input / Output Capacitance | CIO | 8 | pF | TA=25°C, F=1MHz, VIN=0V, VCC=3V | 42 | ||
| Input Capacitance | CIN | 8 | pF | TA=25°C, F=1MHz, VIN=0V, VCC=3V | 42 | ||
| Load Capacitance | CL | 30 | pF | 43 | |||
| Input Rise Time | tR | 2.5 | ns | 43 | |||
| Input Fall Time | tF | 2.5 | ns | 43 | |||
| Clock frequency | FR | 166 | MHz | 43 | |||
| Clock High, Low Time for all commands | tCLH, tCLL | 2.7 | ns | 43 | |||
| Clock Rise Time | tCLCH | 0.1 | V/ns | 43 | |||
| Clock Fall Time | tCHCL | 0.1 | V/ns | 43 | |||
| Data In Setup Time | tDVCH | 2 | ns | 43 | |||
| Data In Hold Time | tCHDX | 3 | ns | 44 | |||
| Clock Low to Output Valid | tCLQV | 5 | ns | 44 | |||
| Output Hold Time | tCLQX | 1 | ns | 44 | |||
| Output Disable Time | tSHQZ | 20 | ns | 44 | |||
| CS# active Setup Time | tSLCH | 5 | ns | 44 | |||
| CS# active Hold Time | tCHSH | 5 | ns | 44 | |||
| CS# non-active Setup Time | tSHCH | 5 | ns | 44 | |||
| CS# non-active Hold Time | tCHSL | 5 | ns | 44 | |||
| CS# deselect Time | tSHSL | 20 | ns | 44 | |||
| HOLD# active Setup Time | tHLCH | 5 | ns | 44 | |||
| HOLD# active Hold Time | tCHHH | 5 | ns | 44 | |||
| HOLD# non-active Setup Time | tHHCH | 5 | ns | 44 | |||
| HOLD# non-active Hold Time | tCHHL | 5 | ns | 44 | |||
| HOLD# to Output Low-Z | tHHQX | 15 | ns | 44 | |||
| HOLD# to Output High-Z | tHLQZ | 15 | ns | 44 | |||
| WP# Setup Time before CS# Low | tWHSL | 20 | ns | 44 | |||
| WP# Hold Time after CS# Low | tSHWL | 100 | ns | 44 | |||
| Power-up: VCC(min) to read Status Register is allowed | tVSL | 200 | µs | 41 | |||
| Time delay before device fully accessible | tPUW | 1 | ms | 41 | |||
| Data Transfer from Cell to Data Register | tRD | 25 | s | 44 | |||
| Data Transfer from Cell to Data Register with internal ECC enabled | tRD_ECC | 95 | 105 | s | 44 | ||
| Program Time | tPROG | 350 | 770 | s | 44 | ||
| Program Time with internal ECC enabled | tPROG_ECC | 450 | 830 | s | 44 | ||
| Block Erase Time | tERS | 2 | 10 | ms | 44 | ||
| Number of Partial Program Cycles | NOP | 1 | cycles | 44 |
CAD (KiCad official)
- Symbol:
F35SQB004G-WWT - Footprint:
Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm - 3D model: WSON-8(6x8) (KiCad packages3D, STEP)
- 3D model files:
f35sqb004g-wwt-etched.step/f35sqb004g-wwt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f35sqb004g-wwt.step/f35sqb004g-wwt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FORESEE datasheet (48 pp, sha256
05356b0c3ea1979f, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).