main
Ray Publish 0.1.0 9fbe6b1
{
  "slug": "f35sqa002g-wwt",
  "version": "0.1.0",
  "type": "component",
  "description": "FORESEE NAND FLASH, WSON-8-EP(6x8). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "f35sqa002g-wwt",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "f35sqa002g-wwt.kicad_sym",
    "f35sqa002g-wwt.kicad_mod",
    "f35sqa002g-wwt.glb",
    "f35sqa002g-wwt.step",
    "f35sqa002g-wwt.lbr",
    "docs/hero.png",
    "docs/f35sqa002g-wwt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "f35sqa002g-wwt-hero.glb",
    "f35sqa002g-wwt-hero.overlay.json",
    "f35sqa002g-wwt-etched.glb"
  ],
  "component": {
    "mpn": "F35SQA002G-WWT",
    "manufacturer": "FORESEE",
    "package": "WSON-8-EP(6x8)",
    "pin_count": 9,
    "category": "Memory",
    "subcategory": "NAND FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835467002060800",
    "parts": {
      "symbol": "f35sqa002g-wwt.kicad_sym",
      "footprint": "f35sqa002g-wwt.kicad_mod",
      "model_3d": "f35sqa002g-wwt-hero.glb",
      "model_3d_plain": "f35sqa002g-wwt-etched.glb",
      "model_3d_step": "f35sqa002g-wwt-etched.step",
      "model_3d_step_plain": "f35sqa002g-wwt.step",
      "lbr": "f35sqa002g-wwt.lbr"
    },
    "distributor_links": {
      "lcsc": "C5126829"
    },
    "distributor_check": {
      "checked_at": "2026-11-06T05:51:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS#",
        "type": "input",
        "description": "Active-low chip select; when high the device is deselected and SIO pins are at high impedance (standby current 10µA typ); when low the device is selected and instructions are accepted (VIL = -0.3 to 0.2VCC, VIH = 0.8VCC to VCC+0.3V); CS# must transition high-to-low before a new instruction is accepted after power-up."
      },
      {
        "number": "2",
        "name": "DO/SIO1",
        "type": "bidirectional",
        "description": "Serial data output in standard SPI mode (data valid on falling CLK edge, tCLQV ≤ 8ns); becomes bidirectional SIO1 I/O pin in Dual SPI and Quad SPI modes; output driver strength defaults to 100% and is adjustable to 75/50/25% via DRV1-0 bits; high impedance when CS# is high."
      },
      {
        "number": "3",
        "name": "WP#/SIO2",
        "type": "bidirectional",
        "description": "Active-low write-protect input; prevents Status Register (SR-1) writes when low in conjunction with Block Protect bits BP[3:0], TB and register-protect bits BPRWD, SP; becomes bidirectional SIO2 I/O pin during Quad SPI operations (QE=1 disables WP# function); setup time before CS# low tWHSL ≥ 20ns."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0V supply return)."
      },
      {
        "number": "5",
        "name": "DI/SIO0",
        "type": "bidirectional",
        "description": "Serial data input in standard SPI mode (data latched on rising CLK edge, setup time tDVCH ≥ 3ns, hold time tCHDX ≥ 3ns); becomes bidirectional SIO0 I/O pin in Dual SPI and Quad SPI modes; input leakage ±2µA."
      },
      {
        "number": "6",
        "name": "CLK",
        "type": "input",
        "description": "SPI serial clock input providing timing for all serial input and output operations; supports SPI Mode 0 (CPOL=0, CPHA=0) and Mode 3 (CPOL=1, CPHA=1); maximum clock frequency 104 MHz; data is latched on the rising edge and shifted out on the falling edge."
      },
      {
        "number": "7",
        "name": "HOLD#/SIO3",
        "type": "bidirectional",
        "description": "Active-low hold input for Standard and Dual SPI; when asserted low (with CS# low) DO goes high-impedance and DI/CLK are ignored, allowing the SPI bus to be shared; becomes bidirectional SIO3 I/O pin during Quad SPI operations and HOLD function is unavailable; setup time tHLCH ≥ 5ns, high-Z propagation tHLQZ ≤ 25ns."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply pin; operating range 2.7V to 3.6V; absolute maximum 4.6V; standby current 10µA typ / 50µA max, page-read current 10mA typ, program/erase current 15mA typ; CS# must track VCC during ramp up/down."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pins 2 (DO/SIO1), 3 (WP#/SIO2), 6 (HOLD#/SIO3), and 8 (DI/SIO0) have dual functionality: unidirectio"
        ],
        "pages_sent": 44,
        "cost_usd": 0.4612,
        "at": "2026-11-06T05:50:55"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589835467002060800",
        "pages": 44,
        "sha256": "b5c3657a69e533ac",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "f35sqa002g-wwt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b3671cc784d73e1338da8140b07b03ab92abaea98ce111ba81b860520c5def71",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "f35sqa002g-wwt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          8.02,
          6.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d7bb03876441a54ce9e5d240f3d6f4779930c321e3944ad4ba1fb2aefd03b013",
        "checked": "2026-11-06",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}