main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers f35sqa002g-wwt: viewers · Ray
f35sqa002g-wwt-etched.glb Publish 0.1.0 · Ray
f35sqa002g-wwt-etched.step f35sqa002g-wwt: factory component page (tier=lcsc) · Ray
f35sqa002g-wwt-hero.glb f35sqa002g-wwt: hero GLB from the etched model (keeps the MPN mark) · Ray
f35sqa002g-wwt-hero.overlay.json Publish 0.1.0 · Ray
f35sqa002g-wwt.glb Publish 0.1.0 · Ray
f35sqa002g-wwt.kicad_mod Publish 0.1.0 · Ray
f35sqa002g-wwt.kicad_sym Publish 0.1.0 · Ray
f35sqa002g-wwt.lbr Publish 0.1.0 · Ray
f35sqa002g-wwt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 9 pins · Ray

F35SQA002G-WWT

FORESEE · NAND FLASH · WSON-8-EP(6x8)

F35SQA002G-WWT from FORESEE, in a WSON-8-EP(6x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS# input Active-low chip select; when high the device is deselected and SIO pins are at high impedance (standby current 10µA typ); when low the device is selected and instructions are accepted (VIL = -0.3 to 0.2VCC, VIH = 0.8VCC to VCC+0.3V); CS# must transition high-to-low before a new instruction is accepted after power-up.
2 DO/SIO1 bidirectional Serial data output in standard SPI mode (data valid on falling CLK edge, tCLQV ≤ 8ns); becomes bidirectional SIO1 I/O pin in Dual SPI and Quad SPI modes; output driver strength defaults to 100% and is adjustable to 75/50/25% via DRV1-0 bits; high impedance when CS# is high.
3 WP#/SIO2 bidirectional Active-low write-protect input; prevents Status Register (SR-1) writes when low in conjunction with Block Protect bits BP[3:0], TB and register-protect bits BPRWD, SP; becomes bidirectional SIO2 I/O pin during Quad SPI operations (QE=1 disables WP# function); setup time before CS# low tWHSL ≥ 20ns.
4 GND power_in Ground reference (0V supply return).
5 DI/SIO0 bidirectional Serial data input in standard SPI mode (data latched on rising CLK edge, setup time tDVCH ≥ 3ns, hold time tCHDX ≥ 3ns); becomes bidirectional SIO0 I/O pin in Dual SPI and Quad SPI modes; input leakage ±2µA.
6 CLK input SPI serial clock input providing timing for all serial input and output operations; supports SPI Mode 0 (CPOL=0, CPHA=0) and Mode 3 (CPOL=1, CPHA=1); maximum clock frequency 104 MHz; data is latched on the rising edge and shifted out on the falling edge.
7 HOLD#/SIO3 bidirectional Active-low hold input for Standard and Dual SPI; when asserted low (with CS# low) DO goes high-impedance and DI/CLK are ignored, allowing the SPI bus to be shared; becomes bidirectional SIO3 I/O pin during Quad SPI operations and HOLD function is unavailable; setup time tHLCH ≥ 5ns, high-Z propagation tHLQZ ≤ 25ns.
8 VCC power_in Power supply pin; operating range 2.7V to 3.6V; absolute maximum 4.6V; standby current 10µA typ / 50µA max, page-read current 10mA typ, program/erase current 15mA typ; CS# must track VCC during ramp up/down.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer FORESEE
Package WSON-8-EP(6x8)
Category Memory
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC -0.6 4.6 V 37
Voltage Applied to Any Pin VIO -0.6 V 37
Temperature under Bias TBIAS -40 125 °C 37
Storage Temperature TSTG -65 150 °C 37
Short circuit output current, I/Os IOS 5 mA 37
Supply Voltage VCC 2.7 3.6 V 37
Ambient Temperature (Industrial) TA -40 85 °C Industrial 37
Ambient Temperature (Industrial plus) TA -40 105 °C Industrial plus 37
VCC(min) to read Status Register is allowed tVSL 200 µs 37
Time delay before device fully accessible tPUW 1 ms 37
Input / Output Capacitance CIO 8 pF TA=25°C, F=1MHz, VIN=0V, VCC=3V 38
Input Capacitance CIN 8 pF TA=25°C, F=1MHz, VIN=0V, VCC=3V 38
Standby Current ICC1 10 50 µA CS# = VCC, VIN = GND or VCC 39
Page Read Current ICC2 10 25 mA 39
Program Current ICC3 15 25 mA 39
Erase Current ICC4 15 25 mA 39
Input Leakage Current ILI -2 2 µA VIN = GND or VCC 39
Output Leakage Current ILO -2 2 µA VOUT = GND or VCC 39
Input Low Voltage VIL -0.3 V 39
Output Low Voltage VOL 0.4 V IOL = 2.1mA 39
Output High Voltage VOH 2.4 V IOH = -400µA 39
Load Capacitance CL 30 pF 39
Input Rise Time tR 2.5 ns 39
Input Fall Time tF 2.5 ns 39
Clock frequency FR 104 MHz 39
Clock High, Low Time for all commands tCLH, tCLL 4 ns 39
Clock Rise Time tCLCH 0.1 V/ns 39
Clock Fall Time tCHCL 0.1 V/ns 39
Data In Setup Time tDVCH 3 ns 39
Data In Hold Time tCHDX 3 ns 40
Clock Low to Output Valid tCLQV 8 ns 40
Output Hold Time tCLQX 2 ns 40
Output Disable Time tSHQZ 20 ns 40
CS# active Setup Time tSLCH 5 ns 40
CS# active Hold Time tCHSH 5 ns 40
CS# non-active Setup Time tSHCH 5 ns 40
CS# non-active Hold Time tCHSL 5 ns 40
CS# deselect Time tSHSL 20 ns 40
HOLD# active Setup Time tHLCH 5 ns 40
HOLD# active Hold Time tCHHH 5 ns 40
HOLD# non-active Setup Time tHHCH 5 ns 40
HOLD# non-active Hold Time tCHHL 5 ns 40
HOLD# to Output Low-Z tHHQX 25 ns 40
HOLD# to Output High-Z tHLQZ 25 ns 40
WP# Setup Time before CS# Low tWHSL 20 ns 40
WP# Hold Time after CS# Low tSHWL 100 ns 40
Data Transfer from Cell to Data Register tRD 25 s 40
Data Transfer from Cell to Data Register with internal ECC enabled tRD_ECC 50 60 s 40
Program Time tPROG 350 700 s 40
Program Time with internal ECC enabled tPROG_ECC 380 750 s 40
Block Erase Time tERS 2 10 ms 40
Number of Partial Program Cycles NOP 4 cycles 40
Valid block number NVB 2008 2048 Blocks 34

CAD (KiCad official)

  • Symbol: F35SQA002G-WWT
  • Footprint: Package_SON:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm
  • 3D model: WSON-8-EP(6x8) (KiCad packages3D, STEP)
  • 3D model files: f35sqa002g-wwt-etched.step / f35sqa002g-wwt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f35sqa002g-wwt.step / f35sqa002g-wwt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: FORESEE datasheet (44 pp, sha256 b5c3657a69e533ac, retrieved 2026-11-06, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF