component
F280034PTRQ1
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
4edc52c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434
{
"slug": "f280034ptrq1",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"embedded processors & controllers",
"f280034ptrq1",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280034ptrq1.kicad_sym",
"f280034ptrq1.kicad_mod",
"f280034ptrq1.glb",
"f280034ptrq1.step",
"f280034ptrq1.lbr",
"docs/hero.png",
"docs/f280034ptrq1-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280034ptrq1-hero.glb",
"f280034ptrq1-hero.overlay.json",
"f280034ptrq1-etched.glb"
],
"component": {
"mpn": "F280034PTRQ1",
"manufacturer": "Texas Instruments",
"package": "LQFP-48(7x7)",
"pin_count": 48,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontrollers (MCU/MPU/SOC)",
"datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/tms320f280034-q1.pdf",
"parts": {
"symbol": "f280034ptrq1.kicad_sym",
"footprint": "f280034ptrq1.kicad_mod",
"model_3d": "f280034ptrq1-hero.glb",
"model_3d_plain": "f280034ptrq1-etched.glb",
"model_3d_step": "f280034ptrq1-etched.step",
"model_3d_step_plain": "f280034ptrq1.step",
"lbr": "f280034ptrq1.lbr"
},
"distributor_links": {
"lcsc": "C34293542",
"digikey": "296-F280034PTRQ1-ND",
"mouser": "595-F280034PTRQ1"
},
"distributor_check": {
"checked_at": "2026-11-02T17:40:13Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-F280034PTRQ1-ND",
"status": "found"
},
"mouser": {
"pn": "595-F280034PTRQ1",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 with SCIA_TX, EPWM7_B, OUTPUTXBAR6 and AUXCLKIN alternate functions; GPIO input at reset with pull-up disabled."
},
{
"number": "2",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 with SCIA_RX, EPWM7_A and ERRORSTS alternate functions; GPIO input at reset with pull-up disabled."
},
{
"number": "3",
"name": "XRSn",
"type": "bidirectional",
"description": "Device reset input and watchdog reset output, open-drain with internal pull-up; a 2.2 kΩ to 10 kΩ resistor to VDDIO is recommended and any capacitor to VSS should be 100 nF or less."
},
{
"number": "4",
"name": "A6,B2,C6",
"type": "input",
"description": "ADC-A input 6 shared with ADC-B input 2 and ADC-C input 6; analog input must stay below VDDA + 0.3 V."
},
{
"number": "5",
"name": "A3,B3,C5,VDAC",
"type": "input",
"description": "ADC-A input 3 shared with ADC-B input 3, ADC-C input 5 and optional external DAC reference VDAC; at least 1 µF on VDAC when used as the DAC reference."
},
{
"number": "6",
"name": "A2,B6,C9",
"type": "input",
"description": "ADC-A input 2 shared with ADC-B input 6 and ADC-C input 9; analog input must stay below VDDA + 0.3 V."
},
{
"number": "7",
"name": "A15,B9,C7",
"type": "input",
"description": "ADC-A input 15 shared with ADC-B input 9 and ADC-C input 7; analog input must stay below VDDA + 0.3 V."
},
{
"number": "8",
"name": "A11,B10,C0",
"type": "input",
"description": "ADC-A input 11 shared with ADC-B input 10 and ADC-C input 0; analog input must stay below VDDA + 0.3 V."
},
{
"number": "9",
"name": "A5,B12,C2",
"type": "input",
"description": "ADC-A input 5 shared with ADC-B input 12 and ADC-C input 2; analog input must stay below VDDA + 0.3 V."
},
{
"number": "10",
"name": "A1,B7,DACB_OUT",
"type": "passive",
"description": "ADC-A input 1 shared with ADC-B input 7 and buffered DAC-B output; unused analog pin may be left unconnected or tied to VSSA through 4.7 kΩ or greater."
},
{
"number": "11",
"name": "A0,B15,C15,DACA_OUT",
"type": "passive",
"description": "ADC-A input 0 shared with ADC-B input 15, ADC-C input 15 and buffered DAC-A output."
},
{
"number": "12",
"name": "VREFHI",
"type": "input",
"description": "ADC high reference voltage; at least one 2.2 µF capacitor between VREFHI and VREFLO placed as close to the device as possible."
},
{
"number": "13",
"name": "VREFLO",
"type": "input",
"description": "ADC low reference voltage, connected to VSSA."
},
{
"number": "14",
"name": "A12,C1",
"type": "input",
"description": "ADC-A input 12 shared with ADC-C input 1; analog input must stay below VDDA + 0.3 V."
},
{
"number": "15",
"name": "A7,C3",
"type": "input",
"description": "ADC-A input 7 shared with ADC-C input 3; analog input must stay below VDDA + 0.3 V."
},
{
"number": "16",
"name": "A8,B0,C11",
"type": "input",
"description": "ADC-A input 8 shared with ADC-B input 0 and ADC-C input 11; analog input must stay below VDDA + 0.3 V."
},
{
"number": "17",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "18",
"name": "VDDA",
"type": "power_in",
"description": "3.3 V analog supply; a decoupling capacitor of at least 2.2 µF is required on this pin."
},
{
"number": "19",
"name": "A4,B8,C14",
"type": "input",
"description": "ADC-A input 4 shared with ADC-B input 8 and ADC-C input 14; analog input must stay below VDDA + 0.3 V."
},
{
"number": "20",
"name": "A9,B4,C8",
"type": "input",
"description": "ADC-A input 9 shared with ADC-B input 4 and ADC-C input 8; analog input must stay below VDDA + 0.3 V."
},
{
"number": "21",
"name": "A10,B1,C10",
"type": "input",
"description": "ADC-A input 10 shared with ADC-B input 1 and ADC-C input 10; analog input must stay below VDDA + 0.3 V."
},
{
"number": "22",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "23",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; decoupling capacitors are required on VDD even when the internal VREG is used."
},
{
"number": "24",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply."
},
{
"number": "25",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 with I2CA_SCL, SPIB_STE, LINA_RX and ADCSOCAO alternate functions."
},
{
"number": "26",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 with SPIA_SIMO, EPWM5_A, SCIA_TX and XCLKOUT alternate functions."
},
{
"number": "27",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 with OUTPUTXBAR1, EPWM8_A, SCIA_TX and ERRORSTS alternate functions; the ERRORSTS output requires an external pull-down resistor."
},
{
"number": "28",
"name": "TCK",
"type": "input",
"description": "JTAG test clock input with internal pull-up."
},
{
"number": "29",
"name": "GPIO37/TDO",
"type": "output",
"description": "JTAG test data output (default function) shared with GPIO37; TDO is tri-stated when JTAG is inactive, so an internal or external pull-up must be used."
},
{
"number": "30",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select with internal pull-up; a 2.2 kΩ external pull-up to VDDIO is recommended."
},
{
"number": "31",
"name": "GPIO35/TDI",
"type": "input",
"description": "JTAG test data input (default function) shared with GPIO35; enable the internal pull-up or add an external pull-up to avoid a floating input."
},
{
"number": "32",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 with I2CA_SDA, SPIB_CLK, EPWM8_B and ADCSOCBO alternate functions."
},
{
"number": "33",
"name": "GPIO18/X2",
"type": "bidirectional",
"description": "General-purpose I/O 18, or crystal oscillator output X2 when the crystal oscillator is enabled."
},
{
"number": "34",
"name": "GPIO19/X1",
"type": "bidirectional",
"description": "General-purpose I/O 19, or crystal oscillator / single-ended clock input X1; initialization software must configure this pin before enabling the crystal oscillator."
},
{
"number": "35",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply."
},
{
"number": "36",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; decoupling capacitors are required."
},
{
"number": "37",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to the board ground."
},
{
"number": "38",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 with EPWM3_A, MCAN_TX, CANA_TX and HIC_NWE alternate functions."
},
{
"number": "39",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 with EPWM2_B, PMBUSA_SCL, SCIA_RX and CANA_RX alternate functions."
},
{
"number": "40",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 with EPWM2_A, PMBUSA_SDA, SCIA_TX and CANA_TX alternate functions."
},
{
"number": "41",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 with EPWM1_B, I2CA_SCL, MCAN_TX and FSITXA_TDM_D1 alternate functions."
},
{
"number": "42",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 with EPWM1_A, I2CA_SDA, MCAN_RX and EQEP1_INDEX alternate functions."
},
{
"number": "43",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 with EPWM4_B, EQEP1_B, SPIB_SIMO and FSITXA_CLK alternate functions."
},
{
"number": "44",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; must be connected to the board ground."
},
{
"number": "45",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply; decoupling capacitors are required."
},
{
"number": "46",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply."
},
{
"number": "47",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 with EPWM3_B, OUTPUTXBAR3, MCAN_RX and CANA_RX alternate functions."
},
{
"number": "48",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 with EPWM4_A, OUTPUTXBAR4, SYNCOUT and EQEP1_A alternate functions."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Package variant PT (48-pin LQFP, 7 mm x 7 mm) pin assignments were taken from Figure 5-5 and cross-c"
],
"pages_sent": 143,
"cost_usd": 0.2317,
"at": "2026-11-02T17:40:02"
},
"datasheet": {
"url": "https://www.ti.com.cn/cn/lit/ds/symlink/tms320f280034-q1.pdf",
"pages": 285,
"sha256": "4385cb7a74ef5d7f",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 48,
"described": 48,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280034ptrq1.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.5
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280034ptrq1-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.0,
9.0,
1.5
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "b3efe9d794ed32830f0c3c1a31f7433cb7b27aff90ac2b2d99cf82b8987d104c",
"checked": "2026-11-02",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}