component
F280025PTQR
Public Made by Adomby adom
Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Set visibility: public
fe96e0f
12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094
{
"schema_version": 1,
"type": "component",
"slug": "f280025ptqr",
"title": "F280025PTQR",
"brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"embedded processors & controllers",
"f280025ptqr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "F280025PTQR",
"manufacturer": "Texas Instruments",
"package": "LQFP-48(7x7)",
"pin_count": 48,
"category": "Embedded Processors & Controllers",
"subcategory": "Microcontrollers (MCU/MPU/SOC)",
"datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
"parts": {
"symbol": "f280025ptqr.kicad_sym",
"footprint": "f280025ptqr.kicad_mod",
"model_3d": "f280025ptqr-hero.glb",
"model_3d_plain": "f280025ptqr-etched.glb",
"model_3d_step": "f280025ptqr-etched.step",
"model_3d_step_plain": "f280025ptqr.step",
"lbr": "f280025ptqr.lbr"
},
"distributor_links": {
"lcsc": "C2868251",
"digikey": "296-F280025PTQRTR-ND",
"mouser": "595-F280025PTQR"
},
"distributor_check": {
"checked_at": "2026-11-10T07:36:45Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-F280025PTQRTR-ND",
"status": "found"
},
"mouser": {
"pn": "595-F280025PTQR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "GPIO29",
"type": "bidirectional",
"description": "General-purpose I/O 29 with alternates including SCIA_TX, EPWM7_B, EQEP1_B and I2CB_SCL; ERRORSTS needs an external pull-down when used."
},
{
"number": "2",
"name": "GPIO28",
"type": "bidirectional",
"description": "General-purpose I/O 28 with alternates including SCIA_RX, EPWM7_A, EQEP1_A and I2CB_SDA; ERRORSTS needs an external pull-down when used."
},
{
"number": "3",
"name": "XRSn",
"type": "bidirectional",
"description": "Open-drain device reset input and watchdog reset output with internal pull-up; a 2.2 kΩ to 10 kΩ resistor to VDDIO and a capacitor of 100 nF or less to VSS are recommended."
},
{
"number": "4",
"name": "A6,C6",
"type": "input",
"description": "Shared analog input for ADC-A channel 6 and ADC-C channel 6 (CMPSS-1/CMPSS-3 inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "5",
"name": "A3/C5/VDAC",
"type": "input",
"description": "ADC-A channel 3 and ADC-C channel 5 analog input, and optional external reference for the on-chip CMPSS DAC; at least 1 µF capacitor required on this pin if used as DAC reference."
},
{
"number": "6",
"name": "A2/C9",
"type": "input",
"description": "ADC-A channel 2 and ADC-C channel 9 analog input (also a CMPSS-1 comparator input); the input must stay below VDDA + 0.3 V."
},
{
"number": "7",
"name": "A15/C7",
"type": "input",
"description": "ADC-A channel 15 and ADC-C channel 7 analog input (also CMPSS-1 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "8",
"name": "A11/C0",
"type": "input",
"description": "ADC-A channel 11 and ADC-C channel 0 analog input (also CMPSS-1 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "9",
"name": "A5/C2",
"type": "input",
"description": "ADC-A channel 5 and ADC-C channel 2 analog input (also CMPSS-3 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "10",
"name": "A1",
"type": "input",
"description": "Analog input (CMPSS-1 comparator input 4 and AIO232 digital-input option); the input must stay below VDDA + 0.3 V."
},
{
"number": "11",
"name": "A0/C15",
"type": "input",
"description": "ADC-A channel 0 and ADC-C channel 15 analog input (also CMPSS-3 comparator input); the input must stay below VDDA + 0.3 V."
},
{
"number": "12",
"name": "VREFHI",
"type": "input",
"description": "ADC high reference voltage: driven externally in external-reference mode, device-driven in internal-reference mode; place at least 2.2 µF between VREFHI and VREFLO as close to the device as possible and keep below VDDA + 0.3 V."
},
{
"number": "13",
"name": "VREFLO",
"type": "input",
"description": "ADC low reference voltage; the datasheet connects it to VSSA when not externally driven."
},
{
"number": "14",
"name": "A12/C1",
"type": "input",
"description": "ADC-A channel 12 and ADC-C channel 1 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "15",
"name": "A7/C3",
"type": "input",
"description": "ADC-A channel 7 and ADC-C channel 3 analog input (also CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "16",
"name": "A8/C11",
"type": "input",
"description": "ADC-A channel 8 and ADC-C channel 11 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "17",
"name": "VSSA",
"type": "power_in",
"description": "Analog ground for the ADC, CMPSS and other analog modules."
},
{
"number": "18",
"name": "VDDA",
"type": "power_in",
"description": "3.3 V analog supply; a decoupling capacitor of at least 2.2 µF is required on this pin."
},
{
"number": "19",
"name": "A4/C14",
"type": "input",
"description": "ADC-A channel 4 and ADC-C channel 14 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "20",
"name": "A9/C8",
"type": "input",
"description": "ADC-A channel 9 and ADC-C channel 8 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "21",
"name": "A10/C10",
"type": "input",
"description": "ADC-A channel 10 and ADC-C channel 10 analog input (also CMPSS-2 comparator inputs); the input must stay below VDDA + 0.3 V."
},
{
"number": "22",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "23",
"name": "GPIO13",
"type": "bidirectional",
"description": "General-purpose I/O 13 with alternates including EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT (open-drain), FSIRXA_CLK, LINB_RX and CANA_TX."
},
{
"number": "24",
"name": "GPIO12",
"type": "bidirectional",
"description": "General-purpose I/O 12 with alternates including EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX, SPIA_CLK, CANA_RX and HIC_INT."
},
{
"number": "25",
"name": "GPIO33",
"type": "bidirectional",
"description": "General-purpose I/O 33 with alternates including I2CA_SCL (open-drain), SPIB_STE, OUTPUTXBAR4, LINA_RX, FSIRXA_CLK, CANA_RX and ADCSOCAO."
},
{
"number": "26",
"name": "GPIO16",
"type": "bidirectional",
"description": "General-purpose I/O 16 with alternates including SPIA_SIMO, OUTPUTXBAR7, EPWM5_A, SCIA_TX, EQEP1_STROBE, PMBUSA_SCL (open-drain) and XCLKOUT."
},
{
"number": "27",
"name": "GPIO24",
"type": "bidirectional",
"description": "General-purpose I/O 24 with alternates including OUTPUTXBAR1, EQEP2_A, SPIB_SIMO, SCIA_TX, PMBUSA_SCL (open-drain) and ERRORSTS, which needs an external pull-down when used."
},
{
"number": "28",
"name": "TCK",
"type": "input",
"description": "JTAG test clock with internal pull-up."
},
{
"number": "29",
"name": "GPIO37/TDO",
"type": "bidirectional",
"description": "Default JTAG TDO function (general-purpose I/O 37 otherwise); TDO is tri-stated when no JTAG activity occurs, so an internal pull-up should be enabled or an external pull-up added."
},
{
"number": "30",
"name": "TMS",
"type": "bidirectional",
"description": "JTAG test mode select with internal pull-up, clocked on the rising edge of TCK; an external 2.2 kΩ pull-up to VDDIO is recommended and the device has no TRSTn pin."
},
{
"number": "31",
"name": "GPIO35/TDI",
"type": "bidirectional",
"description": "Default JTAG TDI function (general-purpose I/O 35 otherwise); the internal pull-up is disabled by default, so enable it or add an external pull-up when used as TDI."
},
{
"number": "32",
"name": "GPIO32",
"type": "bidirectional",
"description": "General-purpose I/O 32 with alternates including I2CA_SDA (open-drain), SPIB_CLK, LINA_TX, FSIRXA_D0, CANA_TX, ADCSOCBO and HIC_INT."
},
{
"number": "33",
"name": "GPIO18_X2",
"type": "output",
"description": "Crystal oscillator output X2 when the crystal oscillator is used, otherwise general-purpose I/O 18 (SPIA_CLK, CANA_RX, EPWM6_A and others)."
},
{
"number": "34",
"name": "GPIO19_X1",
"type": "input",
"description": "Crystal oscillator or single-ended 3.3 V clock input X1 when the oscillator is used, otherwise general-purpose I/O 19; the device initialization software must configure this pin before enabling the crystal oscillator."
},
{
"number": "35",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply; all VDDIO pins must be connected to the same 3.3 V rail."
},
{
"number": "36",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply generated by the internal VREG; decoupling capacitors are required on VDD."
},
{
"number": "37",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "38",
"name": "GPIO4",
"type": "bidirectional",
"description": "General-purpose I/O 4 with alternates including EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK, EQEP2_STROBE, FSIRXA_CLK and HIC_NWE."
},
{
"number": "39",
"name": "GPIO3",
"type": "bidirectional",
"description": "General-purpose I/O 3 with alternates including EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL (open-drain), SPIA_CLK, SCIA_RX, I2CB_SCL and CANA_RX."
},
{
"number": "40",
"name": "GPIO2",
"type": "bidirectional",
"description": "General-purpose I/O 2 with alternates including EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA (open-drain), SPIA_SIMO, SCIA_TX, I2CB_SDA and CANA_TX."
},
{
"number": "41",
"name": "GPIO1",
"type": "bidirectional",
"description": "General-purpose I/O 1 with alternates including EPWM1_B, I2CA_SCL (open-drain), SPIA_SOMI, CLB_OUTPUTXBAR7, HIC_A2 and FSITXA_TDM_D1."
},
{
"number": "42",
"name": "GPIO0",
"type": "bidirectional",
"description": "General-purpose I/O 0 with alternates including EPWM1_A, I2CA_SDA (open-drain), SPIA_STE, FSIRXA_CLK, CLB_OUTPUTXBAR8 and HIC_BASESEL1."
},
{
"number": "43",
"name": "GPIO7",
"type": "bidirectional",
"description": "General-purpose I/O 7 with alternates including EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO, FSITXA_CLK, CLB_OUTPUTXBAR2 and HIC_A6."
},
{
"number": "44",
"name": "VSS",
"type": "power_in",
"description": "Digital ground; all VSS pins must be connected to the board ground."
},
{
"number": "45",
"name": "VDD",
"type": "power_in",
"description": "1.2 V digital logic supply generated by the internal VREG; decoupling capacitors are required on VDD."
},
{
"number": "46",
"name": "VDDIO",
"type": "power_in",
"description": "3.3 V digital I/O supply; all VDDIO pins must be connected to the same 3.3 V rail."
},
{
"number": "47",
"name": "GPIO5",
"type": "bidirectional",
"description": "General-purpose I/O 5 with alternates including EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE, FSITXA_D1, CLB_OUTPUTXBAR5 and HIC_A7."
},
{
"number": "48",
"name": "GPIO6",
"type": "bidirectional",
"description": "General-purpose I/O 6 with alternates including EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, SPIB_SOMI, FSITXA_D0 and HIC_NBE1."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Ordering-table conflict: the 48-pin PT column on the device table (page 8) lists only F280021 (and F; Pages 169-245 of the datasheet were not included; pin-level details come from pages 9-28 provided he; Pins 4 (A6/C6), 5 (A3/C5/VDAC) and 33/34 (GPIO18_X2/GPIO19_X1) are multiplexed with analog or crysta"
],
"pages_sent": 168,
"cost_usd": 1.0119,
"at": "2026-11-10T07:36:35"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
"pages": 245,
"sha256": "0723d8e3e09e1f8b",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 48,
"described": 48,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "f280025ptqr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "f280025ptqr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9,
9,
1.5
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "846a7bb721ecbb66d9d86330dc2dd92e7ce37bf3c5ea364440fae06464b6f5bb",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "PT0048A",
"source_page": 239,
"D": {
"nom_mm": 7,
"range_mm": [
6.8,
7.2
]
},
"E1": {
"nom_mm": 7,
"range_mm": [
6.8,
7.2
]
},
"E": {
"nom_mm": 9,
"range_mm": [
8.8,
9.2
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.6,
"range_mm": [
null,
1.6
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "f280025ptqr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "LQFP-48(7x7)",
"Category": "Embedded Processors & Controllers",
"Pins": "48"
},
"characteristics": {
"version": 1,
"source": "datasheet",
"datasheet_sha256": "0723d8e3e09e1f8b6b3af1f00c1dbbcf561c236561279de25c3696d4caba9fc2",
"rows": [
{
"name": "电源电压 VDDIO(以 VSS 为基准)",
"symbol": "VDDIO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "以 VSS 为基准",
"source_page": 51,
"source": "datasheet"
},
{
"name": "电源电压 VDDA(以 VSSA 为基准)",
"symbol": "VDDA",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "以 VSSA 为基准",
"source_page": 51,
"source": "datasheet"
},
{
"name": "输入电压 (3.3V)",
"symbol": "VIN",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 51,
"source": "datasheet"
},
{
"name": "输出电压",
"symbol": "VO",
"kind": "absolute_maximum",
"unit": "V",
"min": -0.3,
"typ": null,
"max": 4.6,
"conditions": "",
"source_page": 51,
"source": "datasheet"
},
{
"name": "输入钳位电流 - 每个引脚",
"symbol": "IIK",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSS/VSSA 或 VIN > VDDIO/VDDA",
"source_page": 51,
"source": "datasheet"
},
{
"name": "输入钳位电流 - 所有输入总计",
"symbol": "IIKTOTAL",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "VIN < VSS/VSSA 或 VIN > VDDIO/VDDA",
"source_page": 51,
"source": "datasheet"
},
{
"name": "数字输出电流(每引脚)",
"symbol": "IOUT",
"kind": "absolute_maximum",
"unit": "mA",
"min": -20,
"typ": null,
"max": 20,
"conditions": "",
"source_page": 51,
"source": "datasheet"
},
{
"name": "自然通风温度",
"symbol": "TA",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "自然通风",
"source_page": 51,
"source": "datasheet"
},
{
"name": "工作结温",
"symbol": "TJ",
"kind": "absolute_maximum",
"unit": "°C",
"min": -40,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 51,
"source": "datasheet"
},
{
"name": "贮存温度",
"symbol": "Tstg",
"kind": "absolute_maximum",
"unit": "°C",
"min": -65,
"typ": null,
"max": 150,
"conditions": "",
"source_page": 51,
"source": "datasheet"
},
{
"name": "器件电源电压 VDDIO 和 VDDA(启用内部 BOR)",
"symbol": "VDDIO/VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": null,
"typ": 3.3,
"max": 3.63,
"conditions": "启用内部 BOR",
"source_page": 52,
"source": "datasheet"
},
{
"name": "器件电源电压 VDDIO 和 VDDA(禁用内部 BOR)",
"symbol": "VDDIO/VDDA",
"kind": "recommended_operating",
"unit": "V",
"min": 2.8,
"typ": 3.3,
"max": 3.63,
"conditions": "禁用内部 BOR",
"source_page": 52,
"source": "datasheet"
},
{
"name": "结温",
"symbol": "TJ",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 145,
"conditions": "",
"source_page": 52,
"source": "datasheet"
},
{
"name": "自然通风温度",
"symbol": "TA",
"kind": "recommended_operating",
"unit": "°C",
"min": -40,
"typ": null,
"max": 125,
"conditions": "",
"source_page": 52,
"source": "datasheet"
},
{
"name": "VDDIO 运行期间电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 35,
"max": 72,
"conditions": "运行期间",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDA 运行期间电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 3,
"max": 5,
"conditions": "运行期间",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDIO 空闲模式电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 16,
"max": 33,
"conditions": "空闲模式",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDA 空闲模式电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.01,
"max": 0.1,
"conditions": "空闲模式",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDIO 待机模式电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 8,
"max": 22,
"conditions": "待机模式",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDA 待机模式电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.01,
"max": 0.1,
"conditions": "待机模式",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDIO 停机模式电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 1,
"max": 16,
"conditions": "停机模式",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDA 停机模式电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.01,
"max": 0.1,
"conditions": "停机模式",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDIO 擦除/编程周期电流消耗",
"symbol": "IDDIO",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 72,
"max": 106,
"conditions": "擦除/编程周期; CPU 从 RAM 运行; 100MHz SYSCLK",
"source_page": 54,
"source": "datasheet"
},
{
"name": "VDDA 擦除/编程周期电流消耗",
"symbol": "IDDA",
"kind": "electrical",
"unit": "mA",
"min": null,
"typ": 0.1,
"max": 2.5,
"conditions": "擦除/编程周期",
"source_page": 54,
"source": "datasheet"
},
{
"name": "所有输出引脚的高电平输出阻抗",
"symbol": "ROH",
"kind": "electrical",
"unit": "Ω",
"min": 45,
"typ": 65,
"max": 100,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "所有输出引脚的低电平输出阻抗",
"symbol": "ROL",
"kind": "electrical",
"unit": "Ω",
"min": 45,
"typ": 60,
"max": 90,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "高电平输入电压",
"symbol": "VIH",
"kind": "electrical",
"unit": "V",
"min": 2,
"typ": null,
"max": null,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "低电平输入电压",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "低电平输出电压",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "IOL=IOL 最大值",
"source_page": 58,
"source": "datasheet"
},
{
"name": "低电平输出电压",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.2,
"conditions": "IOL = 100µA",
"source_page": 58,
"source": "datasheet"
},
{
"name": "VDDIO 欠压复位电压",
"symbol": "VBOR-VDDIO",
"kind": "electrical",
"unit": "V",
"min": 2.81,
"typ": null,
"max": 3,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "内部稳压器输出",
"symbol": "VVREG",
"kind": "electrical",
"unit": "V",
"min": 1.14,
"typ": 1.2,
"max": 1.32,
"conditions": "",
"source_page": 58,
"source": "datasheet"
},
{
"name": "ADC 时钟 ADCCLK(源自 PERx.SYSCLK)",
"symbol": "ADCCLK",
"kind": "electrical",
"unit": "MHz",
"min": 5,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 111,
"source": "datasheet"
},
{
"name": "比较器以输入为基准的失调电压误差",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -20,
"typ": null,
"max": 20,
"conditions": "低共模,反相输入设置为 50mV",
"source_page": 119,
"source": "datasheet"
},
{
"name": "比较器迟滞",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": 4,
"typ": 12,
"max": 20,
"conditions": "1x",
"source_page": 119,
"source": "datasheet"
},
{
"name": "比较器迟滞",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": 17,
"typ": 24,
"max": 33,
"conditions": "2x",
"source_page": 119,
"source": "datasheet"
},
{
"name": "比较器迟滞",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": 25,
"typ": 36,
"max": 50,
"conditions": "3x",
"source_page": 119,
"source": "datasheet"
},
{
"name": "比较器迟滞",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": 30,
"typ": 48,
"max": 67,
"conditions": "4x",
"source_page": 119,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态失调电压误差",
"symbol": "",
"kind": "electrical",
"unit": "mV",
"min": -25,
"typ": null,
"max": 25,
"conditions": "包含以比较器输入为基准的误差",
"source_page": 120,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态增益误差",
"symbol": "",
"kind": "electrical",
"unit": "FSR 百分比",
"min": -2,
"typ": null,
"max": 2,
"conditions": "包含以比较器输入为基准的误差",
"source_page": 120,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态 DNL(更正了终点)",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": -1,
"typ": null,
"max": 4,
"conditions": "",
"source_page": 120,
"source": "datasheet"
},
{
"name": "CMPSS DAC 静态 INL(更正了终点)",
"symbol": "",
"kind": "electrical",
"unit": "LSB",
"min": -16,
"typ": null,
"max": 16,
"conditions": "",
"source_page": 120,
"source": "datasheet"
},
{
"name": "CMPSS DAC VDAC 负载",
"symbol": "",
"kind": "electrical",
"unit": "kΩ",
"min": 6,
"typ": 8,
"max": 10,
"conditions": "当 VDAC 为基准时; 每个有源 CMPSS 模块",
"source_page": 120,
"source": "datasheet"
},
{
"name": "PMBus 有效低电平输入电压",
"symbol": "VIL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.8,
"conditions": "",
"source_page": 145,
"source": "datasheet"
},
{
"name": "PMBus 有效高电平输入电压",
"symbol": "VIH",
"kind": "electrical",
"unit": "V",
"min": 2.1,
"typ": null,
"max": null,
"conditions": "",
"source_page": 145,
"source": "datasheet"
},
{
"name": "PMBus 低电平输出电压",
"symbol": "VOL",
"kind": "electrical",
"unit": "V",
"min": null,
"typ": null,
"max": 0.4,
"conditions": "Ipullup = 4mA",
"source_page": 145,
"source": "datasheet"
},
{
"name": "PMBus 必须由输入滤波器抑制的尖峰脉冲宽度",
"symbol": "tSP",
"kind": "electrical",
"unit": "ns",
"min": 0,
"typ": null,
"max": 50,
"conditions": "",
"source_page": 145,
"source": "datasheet"
},
{
"name": "PMBus 每个引脚上的输入漏电流",
"symbol": "Ii",
"kind": "electrical",
"unit": "µA",
"min": -10,
"typ": null,
"max": 10,
"conditions": "0.1Vbus < Vi < 0.9Vbus",
"source_page": 145,
"source": "datasheet"
}
]
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"f280025ptqr"
],
"discovery_pitch": "F280025PTQR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"f280025ptqr.kicad_sym",
"f280025ptqr.kicad_mod",
"f280025ptqr.glb",
"f280025ptqr.step",
"f280025ptqr.lbr",
"docs/hero.png",
"docs/f280025ptqr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"f280025ptqr-hero.glb",
"f280025ptqr-hero.overlay.json",
"f280025ptqr-etched.glb"
],
"visibility": {
"public": true
}
}