main
Ray Publish 0.1.0 9e4f10a
{
  "slug": "f280025ptqr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "f280025ptqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "f280025ptqr.kicad_sym",
    "f280025ptqr.kicad_mod",
    "f280025ptqr.glb",
    "f280025ptqr.step",
    "f280025ptqr.lbr",
    "docs/hero.png",
    "docs/f280025ptqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "f280025ptqr-hero.glb",
    "f280025ptqr-hero.overlay.json",
    "f280025ptqr-etched.glb"
  ],
  "component": {
    "mpn": "F280025PTQR",
    "manufacturer": "Texas Instruments",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
    "parts": {
      "symbol": "f280025ptqr.kicad_sym",
      "footprint": "f280025ptqr.kicad_mod",
      "model_3d": "f280025ptqr-hero.glb",
      "model_3d_plain": "f280025ptqr-etched.glb",
      "model_3d_step": "f280025ptqr-etched.step",
      "model_3d_step_plain": "f280025ptqr.step",
      "lbr": "f280025ptqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2868251",
      "digikey": "296-F280025PTQRTR-ND",
      "mouser": "595-F280025PTQR"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T07:36:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-F280025PTQRTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-F280025PTQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GPIO29",
        "type": "bidirectional",
        "description": "General-purpose I/O 29 with alternates including SCIA_TX, EPWM7_B, EQEP1_B and I2CB_SCL; ERRORSTS needs an external pull-down when used."
      },
      {
        "number": "2",
        "name": "GPIO28",
        "type": "bidirectional",
        "description": "General-purpose I/O 28 with alternates including SCIA_RX, EPWM7_A, EQEP1_A and I2CB_SDA; ERRORSTS needs an external pull-down when used."
      },
      {
        "number": "3",
        "name": "XRSn",
        "type": "bidirectional",
        "description": "Open-drain device reset input and watchdog reset output with internal pull-up; a 2.2 kΩ to 10 kΩ resistor to VDDIO and a capacitor of 100 nF or less to VSS are recommended."
      },
      {
        "number": "4",
        "name": "A6,C6",
        "type": "input",
        "description": "Shared analog input for ADC-A channel 6 and ADC-C channel 6 (CMPSS-1/CMPSS-3 inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "5",
        "name": "A3/C5/VDAC",
        "type": "input",
        "description": "ADC-A channel 3 and ADC-C channel 5 analog input, and optional external reference for the on-chip CMPSS DAC; at least 1 µF capacitor required on this pin if used as DAC reference."
      },
      {
        "number": "6",
        "name": "A2/C9",
        "type": "input",
        "description": "ADC-A channel 2 and ADC-C channel 9 analog input (also a CMPSS-1 comparator input); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "7",
        "name": "A15/C7",
        "type": "input",
        "description": "ADC-A channel 15 and ADC-C channel 7 analog input (also CMPSS-1 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "8",
        "name": "A11/C0",
        "type": "input",
        "description": "ADC-A channel 11 and ADC-C channel 0 analog input (also CMPSS-1 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "9",
        "name": "A5/C2",
        "type": "input",
        "description": "ADC-A channel 5 and ADC-C channel 2 analog input (also CMPSS-3 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "10",
        "name": "A1",
        "type": "input",
        "description": "Analog input (CMPSS-1 comparator input 4 and AIO232 digital-input option); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "11",
        "name": "A0/C15",
        "type": "input",
        "description": "ADC-A channel 0 and ADC-C channel 15 analog input (also CMPSS-3 comparator input); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "12",
        "name": "VREFHI",
        "type": "input",
        "description": "ADC high reference voltage: driven externally in external-reference mode, device-driven in internal-reference mode; place at least 2.2 µF between VREFHI and VREFLO as close to the device as possible and keep below VDDA + 0.3 V."
      },
      {
        "number": "13",
        "name": "VREFLO",
        "type": "input",
        "description": "ADC low reference voltage; the datasheet connects it to VSSA when not externally driven."
      },
      {
        "number": "14",
        "name": "A12/C1",
        "type": "input",
        "description": "ADC-A channel 12 and ADC-C channel 1 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "15",
        "name": "A7/C3",
        "type": "input",
        "description": "ADC-A channel 7 and ADC-C channel 3 analog input (also CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "16",
        "name": "A8/C11",
        "type": "input",
        "description": "ADC-A channel 8 and ADC-C channel 11 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "17",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground for the ADC, CMPSS and other analog modules."
      },
      {
        "number": "18",
        "name": "VDDA",
        "type": "power_in",
        "description": "3.3 V analog supply; a decoupling capacitor of at least 2.2 µF is required on this pin."
      },
      {
        "number": "19",
        "name": "A4/C14",
        "type": "input",
        "description": "ADC-A channel 4 and ADC-C channel 14 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "20",
        "name": "A9/C8",
        "type": "input",
        "description": "ADC-A channel 9 and ADC-C channel 8 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "21",
        "name": "A10/C10",
        "type": "input",
        "description": "ADC-A channel 10 and ADC-C channel 10 analog input (also CMPSS-2 comparator inputs); the input must stay below VDDA + 0.3 V."
      },
      {
        "number": "22",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to the board ground."
      },
      {
        "number": "23",
        "name": "GPIO13",
        "type": "bidirectional",
        "description": "General-purpose I/O 13 with alternates including EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT (open-drain), FSIRXA_CLK, LINB_RX and CANA_TX."
      },
      {
        "number": "24",
        "name": "GPIO12",
        "type": "bidirectional",
        "description": "General-purpose I/O 12 with alternates including EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX, SPIA_CLK, CANA_RX and HIC_INT."
      },
      {
        "number": "25",
        "name": "GPIO33",
        "type": "bidirectional",
        "description": "General-purpose I/O 33 with alternates including I2CA_SCL (open-drain), SPIB_STE, OUTPUTXBAR4, LINA_RX, FSIRXA_CLK, CANA_RX and ADCSOCAO."
      },
      {
        "number": "26",
        "name": "GPIO16",
        "type": "bidirectional",
        "description": "General-purpose I/O 16 with alternates including SPIA_SIMO, OUTPUTXBAR7, EPWM5_A, SCIA_TX, EQEP1_STROBE, PMBUSA_SCL (open-drain) and XCLKOUT."
      },
      {
        "number": "27",
        "name": "GPIO24",
        "type": "bidirectional",
        "description": "General-purpose I/O 24 with alternates including OUTPUTXBAR1, EQEP2_A, SPIB_SIMO, SCIA_TX, PMBUSA_SCL (open-drain) and ERRORSTS, which needs an external pull-down when used."
      },
      {
        "number": "28",
        "name": "TCK",
        "type": "input",
        "description": "JTAG test clock with internal pull-up."
      },
      {
        "number": "29",
        "name": "GPIO37/TDO",
        "type": "bidirectional",
        "description": "Default JTAG TDO function (general-purpose I/O 37 otherwise); TDO is tri-stated when no JTAG activity occurs, so an internal pull-up should be enabled or an external pull-up added."
      },
      {
        "number": "30",
        "name": "TMS",
        "type": "bidirectional",
        "description": "JTAG test mode select with internal pull-up, clocked on the rising edge of TCK; an external 2.2 kΩ pull-up to VDDIO is recommended and the device has no TRSTn pin."
      },
      {
        "number": "31",
        "name": "GPIO35/TDI",
        "type": "bidirectional",
        "description": "Default JTAG TDI function (general-purpose I/O 35 otherwise); the internal pull-up is disabled by default, so enable it or add an external pull-up when used as TDI."
      },
      {
        "number": "32",
        "name": "GPIO32",
        "type": "bidirectional",
        "description": "General-purpose I/O 32 with alternates including I2CA_SDA (open-drain), SPIB_CLK, LINA_TX, FSIRXA_D0, CANA_TX, ADCSOCBO and HIC_INT."
      },
      {
        "number": "33",
        "name": "GPIO18_X2",
        "type": "output",
        "description": "Crystal oscillator output X2 when the crystal oscillator is used, otherwise general-purpose I/O 18 (SPIA_CLK, CANA_RX, EPWM6_A and others)."
      },
      {
        "number": "34",
        "name": "GPIO19_X1",
        "type": "input",
        "description": "Crystal oscillator or single-ended 3.3 V clock input X1 when the oscillator is used, otherwise general-purpose I/O 19; the device initialization software must configure this pin before enabling the crystal oscillator."
      },
      {
        "number": "35",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply; all VDDIO pins must be connected to the same 3.3 V rail."
      },
      {
        "number": "36",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply generated by the internal VREG; decoupling capacitors are required on VDD."
      },
      {
        "number": "37",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to the board ground."
      },
      {
        "number": "38",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "General-purpose I/O 4 with alternates including EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK, EQEP2_STROBE, FSIRXA_CLK and HIC_NWE."
      },
      {
        "number": "39",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "General-purpose I/O 3 with alternates including EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL (open-drain), SPIA_CLK, SCIA_RX, I2CB_SCL and CANA_RX."
      },
      {
        "number": "40",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "General-purpose I/O 2 with alternates including EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA (open-drain), SPIA_SIMO, SCIA_TX, I2CB_SDA and CANA_TX."
      },
      {
        "number": "41",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "General-purpose I/O 1 with alternates including EPWM1_B, I2CA_SCL (open-drain), SPIA_SOMI, CLB_OUTPUTXBAR7, HIC_A2 and FSITXA_TDM_D1."
      },
      {
        "number": "42",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "General-purpose I/O 0 with alternates including EPWM1_A, I2CA_SDA (open-drain), SPIA_STE, FSIRXA_CLK, CLB_OUTPUTXBAR8 and HIC_BASESEL1."
      },
      {
        "number": "43",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "General-purpose I/O 7 with alternates including EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO, FSITXA_CLK, CLB_OUTPUTXBAR2 and HIC_A6."
      },
      {
        "number": "44",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to the board ground."
      },
      {
        "number": "45",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply generated by the internal VREG; decoupling capacitors are required on VDD."
      },
      {
        "number": "46",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply; all VDDIO pins must be connected to the same 3.3 V rail."
      },
      {
        "number": "47",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "General-purpose I/O 5 with alternates including EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE, FSITXA_D1, CLB_OUTPUTXBAR5 and HIC_A7."
      },
      {
        "number": "48",
        "name": "GPIO6",
        "type": "bidirectional",
        "description": "General-purpose I/O 6 with alternates including EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, SPIB_SOMI, FSITXA_D0 and HIC_NBE1."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Ordering-table conflict: the 48-pin PT column on the device table (page 8) lists only F280021 (and F; Pages 169-245 of the datasheet were not included; pin-level details come from pages 9-28 provided he; Pins 4 (A6/C6), 5 (A3/C5/VDAC) and 33/34 (GPIO18_X2/GPIO19_X1) are multiplexed with analog or crysta"
        ],
        "pages_sent": 168,
        "cost_usd": 1.0119,
        "at": "2026-11-10T07:36:35"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
        "pages": 245,
        "sha256": "0723d8e3e09e1f8b",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "f280025ptqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "f280025ptqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "846a7bb721ecbb66d9d86330dc2dd92e7ce37bf3c5ea364440fae06464b6f5bb",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "PT0048A",
      "source_page": 239,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.8,
          7.2
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          8.8,
          9.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "f280025ptqr.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}