main
History Download
Ray Publish 0.1.0 9e4f10a

F280025PTQR

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

F280025PTQR from Texas Instruments, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO29 bidirectional General-purpose I/O 29 with alternates including SCIA_TX, EPWM7_B, EQEP1_B and I2CB_SCL; ERRORSTS needs an external pull-down when used.
2 GPIO28 bidirectional General-purpose I/O 28 with alternates including SCIA_RX, EPWM7_A, EQEP1_A and I2CB_SDA; ERRORSTS needs an external pull-down when used.
3 XRSn bidirectional Open-drain device reset input and watchdog reset output with internal pull-up; a 2.2 kΩ to 10 kΩ resistor to VDDIO and a capacitor of 100 nF or less to VSS are recommended.
4 A6,C6 input Shared analog input for ADC-A channel 6 and ADC-C channel 6 (CMPSS-1/CMPSS-3 inputs); the input must stay below VDDA + 0.3 V.
5 A3/C5/VDAC input ADC-A channel 3 and ADC-C channel 5 analog input, and optional external reference for the on-chip CMPSS DAC; at least 1 µF capacitor required on this pin if used as DAC reference.
6 A2/C9 input ADC-A channel 2 and ADC-C channel 9 analog input (also a CMPSS-1 comparator input); the input must stay below VDDA + 0.3 V.
7 A15/C7 input ADC-A channel 15 and ADC-C channel 7 analog input (also CMPSS-1 comparator inputs); the input must stay below VDDA + 0.3 V.
8 A11/C0 input ADC-A channel 11 and ADC-C channel 0 analog input (also CMPSS-1 comparator inputs); the input must stay below VDDA + 0.3 V.
9 A5/C2 input ADC-A channel 5 and ADC-C channel 2 analog input (also CMPSS-3 comparator inputs); the input must stay below VDDA + 0.3 V.
10 A1 input Analog input (CMPSS-1 comparator input 4 and AIO232 digital-input option); the input must stay below VDDA + 0.3 V.
11 A0/C15 input ADC-A channel 0 and ADC-C channel 15 analog input (also CMPSS-3 comparator input); the input must stay below VDDA + 0.3 V.
12 VREFHI input ADC high reference voltage: driven externally in external-reference mode, device-driven in internal-reference mode; place at least 2.2 µF between VREFHI and VREFLO as close to the device as possible and keep below VDDA + 0.3 V.
13 VREFLO input ADC low reference voltage; the datasheet connects it to VSSA when not externally driven.
14 A12/C1 input ADC-A channel 12 and ADC-C channel 1 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V.
15 A7/C3 input ADC-A channel 7 and ADC-C channel 3 analog input (also CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V.
16 A8/C11 input ADC-A channel 8 and ADC-C channel 11 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V.
17 VSSA power_in Analog ground for the ADC, CMPSS and other analog modules.
18 VDDA power_in 3.3 V analog supply; a decoupling capacitor of at least 2.2 µF is required on this pin.
19 A4/C14 input ADC-A channel 4 and ADC-C channel 14 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V.
20 A9/C8 input ADC-A channel 9 and ADC-C channel 8 analog input (also CMPSS-2 and CMPSS-4 comparator inputs); the input must stay below VDDA + 0.3 V.
21 A10/C10 input ADC-A channel 10 and ADC-C channel 10 analog input (also CMPSS-2 comparator inputs); the input must stay below VDDA + 0.3 V.
22 VSS power_in Digital ground; all VSS pins must be connected to the board ground.
23 GPIO13 bidirectional General-purpose I/O 13 with alternates including EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT (open-drain), FSIRXA_CLK, LINB_RX and CANA_TX.
24 GPIO12 bidirectional General-purpose I/O 12 with alternates including EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX, SPIA_CLK, CANA_RX and HIC_INT.
25 GPIO33 bidirectional General-purpose I/O 33 with alternates including I2CA_SCL (open-drain), SPIB_STE, OUTPUTXBAR4, LINA_RX, FSIRXA_CLK, CANA_RX and ADCSOCAO.
26 GPIO16 bidirectional General-purpose I/O 16 with alternates including SPIA_SIMO, OUTPUTXBAR7, EPWM5_A, SCIA_TX, EQEP1_STROBE, PMBUSA_SCL (open-drain) and XCLKOUT.
27 GPIO24 bidirectional General-purpose I/O 24 with alternates including OUTPUTXBAR1, EQEP2_A, SPIB_SIMO, SCIA_TX, PMBUSA_SCL (open-drain) and ERRORSTS, which needs an external pull-down when used.
28 TCK input JTAG test clock with internal pull-up.
29 GPIO37/TDO bidirectional Default JTAG TDO function (general-purpose I/O 37 otherwise); TDO is tri-stated when no JTAG activity occurs, so an internal pull-up should be enabled or an external pull-up added.
30 TMS bidirectional JTAG test mode select with internal pull-up, clocked on the rising edge of TCK; an external 2.2 kΩ pull-up to VDDIO is recommended and the device has no TRSTn pin.
31 GPIO35/TDI bidirectional Default JTAG TDI function (general-purpose I/O 35 otherwise); the internal pull-up is disabled by default, so enable it or add an external pull-up when used as TDI.
32 GPIO32 bidirectional General-purpose I/O 32 with alternates including I2CA_SDA (open-drain), SPIB_CLK, LINA_TX, FSIRXA_D0, CANA_TX, ADCSOCBO and HIC_INT.
33 GPIO18_X2 output Crystal oscillator output X2 when the crystal oscillator is used, otherwise general-purpose I/O 18 (SPIA_CLK, CANA_RX, EPWM6_A and others).
34 GPIO19_X1 input Crystal oscillator or single-ended 3.3 V clock input X1 when the oscillator is used, otherwise general-purpose I/O 19; the device initialization software must configure this pin before enabling the crystal oscillator.
35 VDDIO power_in 3.3 V digital I/O supply; all VDDIO pins must be connected to the same 3.3 V rail.
36 VDD power_in 1.2 V digital logic supply generated by the internal VREG; decoupling capacitors are required on VDD.
37 VSS power_in Digital ground; all VSS pins must be connected to the board ground.
38 GPIO4 bidirectional General-purpose I/O 4 with alternates including EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK, EQEP2_STROBE, FSIRXA_CLK and HIC_NWE.
39 GPIO3 bidirectional General-purpose I/O 3 with alternates including EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL (open-drain), SPIA_CLK, SCIA_RX, I2CB_SCL and CANA_RX.
40 GPIO2 bidirectional General-purpose I/O 2 with alternates including EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA (open-drain), SPIA_SIMO, SCIA_TX, I2CB_SDA and CANA_TX.
41 GPIO1 bidirectional General-purpose I/O 1 with alternates including EPWM1_B, I2CA_SCL (open-drain), SPIA_SOMI, CLB_OUTPUTXBAR7, HIC_A2 and FSITXA_TDM_D1.
42 GPIO0 bidirectional General-purpose I/O 0 with alternates including EPWM1_A, I2CA_SDA (open-drain), SPIA_STE, FSIRXA_CLK, CLB_OUTPUTXBAR8 and HIC_BASESEL1.
43 GPIO7 bidirectional General-purpose I/O 7 with alternates including EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO, FSITXA_CLK, CLB_OUTPUTXBAR2 and HIC_A6.
44 VSS power_in Digital ground; all VSS pins must be connected to the board ground.
45 VDD power_in 1.2 V digital logic supply generated by the internal VREG; decoupling capacitors are required on VDD.
46 VDDIO power_in 3.3 V digital I/O supply; all VDDIO pins must be connected to the same 3.3 V rail.
47 GPIO5 bidirectional General-purpose I/O 5 with alternates including EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE, FSITXA_D1, CLB_OUTPUTXBAR5 and HIC_A7.
48 GPIO6 bidirectional General-purpose I/O 6 with alternates including EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, SPIB_SOMI, FSITXA_D0 and HIC_NBE1.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
电源电压 VDDIO(以 VSS 为基准) VDDIO -0.3 4.6 V 以 VSS 为基准 51
电源电压 VDDA(以 VSSA 为基准) VDDA -0.3 4.6 V 以 VSSA 为基准 51
输入电压 (3.3V) VIN -0.3 4.6 V 51
输出电压 VO -0.3 4.6 V 51
输入钳位电流 - 每个引脚 IIK -20 20 mA VIN < VSS/VSSA 或 VIN > VDDIO/VDDA 51
输入钳位电流 - 所有输入总计 IIKTOTAL -20 20 mA VIN < VSS/VSSA 或 VIN > VDDIO/VDDA 51
数字输出电流(每引脚) IOUT -20 20 mA 51
自然通风温度 TA -40 125 °C 自然通风 51
工作结温 TJ -40 150 °C 51
贮存温度 Tstg -65 150 °C 51
器件电源电压 VDDIO 和 VDDA(启用内部 BOR) VDDIO/VDDA 3.3 3.63 V 启用内部 BOR 52
器件电源电压 VDDIO 和 VDDA(禁用内部 BOR) VDDIO/VDDA 2.8 3.3 3.63 V 禁用内部 BOR 52
结温 TJ -40 145 °C 52
自然通风温度 TA -40 125 °C 52
VDDIO 运行期间电流消耗 IDDIO 35 72 mA 运行期间 54
VDDA 运行期间电流消耗 IDDA 3 5 mA 运行期间 54
VDDIO 空闲模式电流消耗 IDDIO 16 33 mA 空闲模式 54
VDDA 空闲模式电流消耗 IDDA 0.01 0.1 mA 空闲模式 54
VDDIO 待机模式电流消耗 IDDIO 8 22 mA 待机模式 54
VDDA 待机模式电流消耗 IDDA 0.01 0.1 mA 待机模式 54
VDDIO 停机模式电流消耗 IDDIO 1 16 mA 停机模式 54
VDDA 停机模式电流消耗 IDDA 0.01 0.1 mA 停机模式 54
VDDIO 擦除/编程周期电流消耗 IDDIO 72 106 mA 擦除/编程周期; CPU 从 RAM 运行; 100MHz SYSCLK 54
VDDA 擦除/编程周期电流消耗 IDDA 0.1 2.5 mA 擦除/编程周期 54
所有输出引脚的高电平输出阻抗 ROH 45 65 100 Ω 58
所有输出引脚的低电平输出阻抗 ROL 45 60 90 Ω 58
高电平输入电压 VIH 2 V 58
低电平输入电压 VIL 0.8 V 58
低电平输出电压 VOL 0.4 V IOL=IOL 最大值 58
低电平输出电压 VOL 0.2 V IOL = 100µA 58
VDDIO 欠压复位电压 VBOR-VDDIO 2.81 3 V 58
内部稳压器输出 VVREG 1.14 1.2 1.32 V 58
ADC 时钟 ADCCLK(源自 PERx.SYSCLK) ADCCLK 5 50 MHz 111
比较器以输入为基准的失调电压误差 -20 20 mV 低共模,反相输入设置为 50mV 119
比较器迟滞 4 12 20 LSB 1x 119
比较器迟滞 17 24 33 LSB 2x 119
比较器迟滞 25 36 50 LSB 3x 119
比较器迟滞 30 48 67 LSB 4x 119
CMPSS DAC 静态失调电压误差 -25 25 mV 包含以比较器输入为基准的误差 120
CMPSS DAC 静态增益误差 -2 2 FSR 百分比 包含以比较器输入为基准的误差 120
CMPSS DAC 静态 DNL(更正了终点) -1 4 LSB 120
CMPSS DAC 静态 INL(更正了终点) -16 16 LSB 120
CMPSS DAC VDAC 负载 6 8 10 kΩ 当 VDAC 为基准时; 每个有源 CMPSS 模块 120
PMBus 有效低电平输入电压 VIL 0.8 V 145
PMBus 有效高电平输入电压 VIH 2.1 V 145
PMBus 低电平输出电压 VOL 0.4 V Ipullup = 4mA 145
PMBus 必须由输入滤波器抑制的尖峰脉冲宽度 tSP 0 50 ns 145
PMBus 每个引脚上的输入漏电流 Ii -10 10 µA 0.1Vbus < Vi < 0.9Vbus 145

CAD (KiCad official)

  • Symbol: F280025PTQR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: f280025ptqr-etched.step / f280025ptqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f280025ptqr.step / f280025ptqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (245 pp, sha256 0723d8e3e09e1f8b, retrieved 2026-11-10, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF