F280025CPNQR

{
  "schema_version": 1,
  "type": "component",
  "slug": "f280025cpnqr",
  "title": "F280025CPNQR",
  "brief": "Texas Instruments Microcontrollers (MCU/MPU/SOC), LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "f280025cpnqr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "F280025CPNQR",
    "manufacturer": "Texas Instruments",
    "package": "LQFP-80(12x12)",
    "pin_count": 80,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
    "parts": {
      "symbol": "f280025cpnqr.kicad_sym",
      "footprint": "f280025cpnqr.kicad_mod",
      "model_3d": "f280025cpnqr-hero.glb",
      "model_3d_plain": "f280025cpnqr.glb",
      "model_3d_step": "f280025cpnqr-etched.step",
      "model_3d_step_plain": "f280025cpnqr.step",
      "lbr": "f280025cpnqr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2870110",
      "digikey": "296-F280025CPNQRTR-ND",
      "mouser": "595-F280025CPNQR"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T10:15:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-F280025CPNQRTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-F280025CPNQR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GPIO30",
        "type": "bidirectional",
        "description": "General-purpose I/O 30 with alternates CANA_RX, SPIB_SIMO, OUTPUTXBAR7, EQEP1_STROBE, FSIRXA_CLK, EPWM1_A and HIC_D8; the internal pullup is disabled by default."
      },
      {
        "number": "2",
        "name": "GPIO31",
        "type": "bidirectional",
        "description": "General-purpose I/O 31 with alternates CANA_TX, SPIB_SOMI, OUTPUTXBAR8, EQEP1_INDEX, FSIRXA_D1, EPWM1_B and HIC_D10; the internal pullup is disabled by default."
      },
      {
        "number": "3",
        "name": "GPIO29",
        "type": "bidirectional",
        "description": "General-purpose I/O 29 with alternates SCIA_TX, EPWM7_B, OUTPUTXBAR6, EQEP1_B, EQEP2_INDEX, LINA_RX, SPIB_STE, I2CB_SCL and HIC_NCS; ERRORSTS use requires an external pulldown resistor."
      },
      {
        "number": "4",
        "name": "GPIO28",
        "type": "bidirectional",
        "description": "General-purpose I/O 28 with alternates SCIA_RX, EPWM7_A, OUTPUTXBAR5, EQEP1_A, EQEP2_STROBE, LINA_TX, SPIB_CLK, I2CB_SDA and HIC_NOE; ERRORSTS use requires an external pulldown resistor."
      },
      {
        "number": "5",
        "name": "XRSn",
        "type": "bidirectional",
        "description": "Open-drain device reset input and watchdog reset output with internal pullup; connect a 2.2 kΩ to 10 kΩ resistor between XRSn and VDDIO and a capacitor of 100 nF or less to VSS if filtering is used."
      },
      {
        "number": "6",
        "name": "GPIO46",
        "type": "bidirectional",
        "description": "General-purpose I/O 46 with alternates LINA_TX, FSITXA_D1 and HIC_NWE."
      },
      {
        "number": "7",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin; see the power management module section for usage."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin, generated internally by VREG; decoupling capacitance is required on VDD."
      },
      {
        "number": "9",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to board ground."
      },
      {
        "number": "10",
        "name": "A6",
        "type": "input",
        "description": "Analog input A6 (CMPSS-1 comparator inputs and AIO228 alternate); unused analog pins may be left unconnected, tied to VSSA, or tied to VSSA through a resistor."
      },
      {
        "number": "11",
        "name": "C6",
        "type": "input",
        "description": "Analog input C6 (CMPSS-3 comparator input 0 and AIO226 alternate); unused analog pins may be left unconnected, tied to VSSA, or tied to VSSA through a resistor."
      },
      {
        "number": "12",
        "name": "A3/C5/VDAC",
        "type": "input",
        "description": "ADC-A input 3 / ADC-C input 5, and optional external reference for the on-chip CMPSS DAC; an internal capacitor to VSSA is always present, and at least one 1 µF capacitor is required if used as the DAC reference."
      },
      {
        "number": "13",
        "name": "A2/C9",
        "type": "input",
        "description": "ADC-A input 2 / ADC-C input 9 with CMPSS-1 comparator inputs and AIO224 alternate."
      },
      {
        "number": "14",
        "name": "A15/C7",
        "type": "input",
        "description": "ADC-A input 15 / ADC-C input 7 with CMPSS-1 comparator inputs and AIO233 alternate."
      },
      {
        "number": "15",
        "name": "A14/C4",
        "type": "input",
        "description": "ADC-A input 14 / ADC-C input 4 with CMPSS-3 comparator inputs and AIO239 alternate."
      },
      {
        "number": "16",
        "name": "A11/C0",
        "type": "input",
        "description": "ADC-A input 11 / ADC-C input 0 with CMPSS-1 comparator inputs and AIO237 alternate."
      },
      {
        "number": "17",
        "name": "A5/C2",
        "type": "input",
        "description": "ADC-A input 5 / ADC-C input 2 with CMPSS-3 comparator inputs and AIO244 alternate."
      },
      {
        "number": "18",
        "name": "A1",
        "type": "input",
        "description": "Analog input A1 (CMPSS-1 comparator input 4 and AIO232 alternate)."
      },
      {
        "number": "19",
        "name": "A0/C15",
        "type": "input",
        "description": "ADC-A input 0 / ADC-C input 15 with CMPSS-3 comparator input 2 and AIO231 alternate."
      },
      {
        "number": "20",
        "name": "VREFHI",
        "type": "input",
        "description": "ADC high voltage reference: driven externally in external reference mode or by the device in internal reference mode; place at least one 2.2 µF capacitor between VREFHI and VREFLO as close to the device as possible."
      },
      {
        "number": "21",
        "name": "VREFLO",
        "type": "input",
        "description": "ADC low voltage reference, connected to VSSA."
      },
      {
        "number": "22",
        "name": "A12/C1",
        "type": "input",
        "description": "ADC-A input 12 / ADC-C input 1 with CMPSS-2 and CMPSS-4 comparator inputs and AIO238 alternate."
      },
      {
        "number": "23",
        "name": "A7/C3",
        "type": "input",
        "description": "ADC-A input 7 / ADC-C input 3 with CMPSS-4 comparator inputs and AIO245 alternate."
      },
      {
        "number": "24",
        "name": "A8/C11",
        "type": "input",
        "description": "ADC-A input 8 / ADC-C input 11 with CMPSS-2 and CMPSS-4 comparator inputs and AIO241 alternate."
      },
      {
        "number": "25",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground for the ADC and comparator subsystem."
      },
      {
        "number": "26",
        "name": "VDDA",
        "type": "power_in",
        "description": "3.3 V analog supply pin; a minimum of 2.2 µF decoupling capacitor is required on this pin."
      },
      {
        "number": "27",
        "name": "A4/C14",
        "type": "input",
        "description": "ADC-A input 4 / ADC-C input 14 with CMPSS-2 and CMPSS-4 comparator inputs and AIO225 alternate."
      },
      {
        "number": "28",
        "name": "A9/C8",
        "type": "input",
        "description": "ADC-A input 9 / ADC-C input 8 with CMPSS-2 and CMPSS-4 comparator inputs and AIO227 alternate."
      },
      {
        "number": "29",
        "name": "A10/C10",
        "type": "input",
        "description": "ADC-A input 10 / ADC-C input 10 with CMPSS-2 comparator inputs and AIO230 alternate."
      },
      {
        "number": "30",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to board ground."
      },
      {
        "number": "31",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin, generated internally by VREG; decoupling capacitance is required on VDD."
      },
      {
        "number": "32",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin; see the power management module section for usage."
      },
      {
        "number": "33",
        "name": "FLT2",
        "type": "unconnected",
        "description": "Flash test pin 2 reserved for TI; it must be left unconnected (or tied to VSS through 4.7 kΩ or greater)."
      },
      {
        "number": "34",
        "name": "FLT1",
        "type": "unconnected",
        "description": "Flash test pin 1 reserved for TI; it must be left unconnected (or tied to VSS through 4.7 kΩ or greater)."
      },
      {
        "number": "35",
        "name": "GPIO13",
        "type": "bidirectional",
        "description": "General-purpose I/O 13 with alternates EPWM7_B, EQEP1_INDEX, PMBUSA_ALERT (open-drain), FSIRXA_CLK, LINB_RX, SPIA_SOMI, CANA_TX and HIC_D11."
      },
      {
        "number": "36",
        "name": "GPIO12",
        "type": "bidirectional",
        "description": "General-purpose I/O 12 with alternates EPWM7_A, EQEP1_STROBE, PMBUSA_CTL, FSIRXA_D0, LINB_TX, SPIA_CLK, CANA_RX and HIC_INT."
      },
      {
        "number": "37",
        "name": "GPIO11",
        "type": "bidirectional",
        "description": "General-purpose I/O 11 with alternates EPWM6_B, OUTPUTXBAR7, EQEP1_B, SPIA_STE, FSIRXA_D1, LINB_RX, EQEP2_A, SPIA_SIMO and HIC_NBE0."
      },
      {
        "number": "38",
        "name": "GPIO33",
        "type": "bidirectional",
        "description": "General-purpose I/O 33 with alternates I2CA_SCL (open-drain), SPIB_STE, OUTPUTXBAR4, LINA_RX, FSIRXA_CLK, CANA_RX, EQEP2_B, ADCSOCAO and HIC_D0."
      },
      {
        "number": "39",
        "name": "GPIO16",
        "type": "bidirectional",
        "description": "General-purpose I/O 16 with alternates SPIA_SIMO, OUTPUTXBAR7, EPWM5_A, SCIA_TX, EQEP1_STROBE, PMBUSA_SCL, XCLKOUT, EQEP2_B and SPIB_SOMI."
      },
      {
        "number": "40",
        "name": "GPIO17",
        "type": "bidirectional",
        "description": "General-purpose I/O 17 with alternates SPIA_SOMI, OUTPUTXBAR8, EPWM5_B, SCIA_RX, EQEP1_INDEX, PMBUSA_SDA, CANA_TX and HIC_D2."
      },
      {
        "number": "41",
        "name": "GPIO24",
        "type": "bidirectional",
        "description": "General-purpose I/O 24 with alternates OUTPUTXBAR1, EQEP2_A, SPIB_SIMO, LINB_TX, PMBUSA_SCL, SCIA_TX, ERRORSTS (requires an external pulldown resistor when used) and HIC_D3."
      },
      {
        "number": "42",
        "name": "GPIO25",
        "type": "bidirectional",
        "description": "General-purpose I/O 25 with alternates OUTPUTXBAR2, EQEP2_B, EQEP1_A, SPIB_SOMI, FSITXA_D1, PMBUSA_SDA, SCIA_RX and HIC_BASESEL0."
      },
      {
        "number": "43",
        "name": "GPIO26",
        "type": "bidirectional",
        "description": "General-purpose I/O 26 with alternates OUTPUTXBAR3, EQEP2_INDEX, SPIB_CLK, FSITXA_D0, PMBUSA_CTL, I2CA_SDA, HIC_D0 and HIC_A1."
      },
      {
        "number": "44",
        "name": "GPIO27",
        "type": "bidirectional",
        "description": "General-purpose I/O 27 with alternates OUTPUTXBAR4, EQEP2_STROBE, SPIB_STE, FSITXA_CLK, PMBUSA_ALERT (open-drain), I2CA_SCL, HIC_D1 and HIC_A4."
      },
      {
        "number": "45",
        "name": "TCK",
        "type": "input",
        "description": "JTAG test clock input with an internal pullup resistor."
      },
      {
        "number": "46",
        "name": "GPIO37/TDO",
        "type": "output",
        "description": "JTAG test data output (TDO) by default; it is tri-stated when JTAG is inactive, so an internal or external pullup is needed to avoid a floating GPIO input when used as GPIO."
      },
      {
        "number": "47",
        "name": "TMS",
        "type": "bidirectional",
        "description": "JTAG test mode select with an internal pullup; the board should include an external 2.2 kΩ pullup to VDDIO to hold JTAG in reset during normal operation."
      },
      {
        "number": "48",
        "name": "GPIO35/TDI",
        "type": "input",
        "description": "JTAG test data input (TDI) by default; the internal pullup is disabled by default, so enable it or add an external pullup to avoid a floating input when used as TDI."
      },
      {
        "number": "49",
        "name": "GPIO32",
        "type": "bidirectional",
        "description": "General-purpose I/O 32 with alternates I2CA_SDA (open-drain), SPIB_CLK, LINA_TX, FSIRXA_D0, CANA_TX, ADCSOCBO and HIC_INT."
      },
      {
        "number": "50",
        "name": "GPIO18_X2",
        "type": "bidirectional",
        "description": "General-purpose I/O 18, or crystal oscillator output X2 when the crystal oscillator is used; alternates include SPIA_CLK, CANA_RX, EPWM6_A, I2CA_SCL, XCLKOUT and FSITXA_TDM_CLK."
      },
      {
        "number": "51",
        "name": "GPIO19_X1",
        "type": "bidirectional",
        "description": "General-purpose I/O 19, or crystal/single-ended clock input X1; device initialization software must configure this pin before enabling the crystal oscillator, and it can also be driven by a single-ended 3.3 V clock."
      },
      {
        "number": "52",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin; see the power management module section for usage."
      },
      {
        "number": "53",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin, generated internally by VREG; decoupling capacitance is required on VDD."
      },
      {
        "number": "54",
        "name": "GPIO43",
        "type": "bidirectional",
        "description": "General-purpose I/O 43 with alternates OUTPUTXBAR6, PMBUSA_ALERT (open-drain), I2CA_SCL (open-drain), EQEP1_INDEX, CLB_OUTPUTXBAR4 and HIC_A7."
      },
      {
        "number": "55",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to board ground."
      },
      {
        "number": "56",
        "name": "GPIO39",
        "type": "bidirectional",
        "description": "General-purpose I/O 39 with alternates FSIRXA_CLK, EQEP2_INDEX, CLB_OUTPUTXBAR2, SYNCOUT, EQEP1_INDEX and HIC_D7."
      },
      {
        "number": "57",
        "name": "GPIO42",
        "type": "bidirectional",
        "description": "General-purpose I/O 42 with alternates LINA_RX, OUTPUTXBAR5, PMBUSA_CTL, I2CA_SDA (open-drain), EQEP1_STROBE, CLB_OUTPUTXBAR3 and HIC_D2."
      },
      {
        "number": "58",
        "name": "GPIO8",
        "type": "bidirectional",
        "description": "General-purpose I/O 8 with alternates EPWM5_A, ADCSOCAO, EQEP1_STROBE, SCIA_TX, SPIA_SIMO, I2CA_SCL (open-drain), FSITXA_D1 and HIC_A0."
      },
      {
        "number": "59",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "General-purpose I/O 4 with alternates EPWM3_A, OUTPUTXBAR3, CANA_TX, SPIB_CLK, EQEP2_STROBE, FSIRXA_CLK, CLB_OUTPUTXBAR6, HIC_BASESEL2 and HIC_NWE."
      },
      {
        "number": "60",
        "name": "GPIO3",
        "type": "bidirectional",
        "description": "General-purpose I/O 3 with alternates EPWM2_B, OUTPUTXBAR2, PMBUSA_SCL (open-drain), SPIA_CLK, SCIA_RX, FSIRXA_D0, I2CB_SCL (open-drain), CANA_RX and HIC_NOE."
      },
      {
        "number": "61",
        "name": "GPIO2",
        "type": "bidirectional",
        "description": "General-purpose I/O 2 with alternates EPWM2_A, OUTPUTXBAR1, PMBUSA_SDA (open-drain), SPIA_SIMO, SCIA_TX, FSIRXA_D1, I2CB_SDA (open-drain), CANA_TX and HIC_A1."
      },
      {
        "number": "62",
        "name": "GPIO1",
        "type": "bidirectional",
        "description": "General-purpose I/O 1 with alternates EPWM1_B, I2CA_SCL (open-drain), SPIA_SOMI, CLB_OUTPUTXBAR7, HIC_A2 and FSITXA_TDM_D1."
      },
      {
        "number": "63",
        "name": "GPIO0",
        "type": "bidirectional",
        "description": "General-purpose I/O 0 with alternates EPWM1_A, I2CA_SDA (open-drain), SPIA_STE, FSIRXA_CLK, CLB_OUTPUTXBAR8 and HIC_BASESEL1."
      },
      {
        "number": "64",
        "name": "GPIO40",
        "type": "bidirectional",
        "description": "General-purpose I/O 40 with alternates SPIB_SIMO, EPWM2_B, PMBUSA_SDA (open-drain), FSIRXA_D0, EQEP1_A, LINB_TX and HIC_NBE1."
      },
      {
        "number": "65",
        "name": "GPIO23",
        "type": "bidirectional",
        "description": "General-purpose I/O 23 with alternates EQEP1_INDEX, SPIB_STE, LINA_RX, LINB_RX, HIC_A3, EPWM4_B and HIC_D11."
      },
      {
        "number": "66",
        "name": "GPIO41",
        "type": "bidirectional",
        "description": "General-purpose I/O 41 with alternates EPWM2_A, PMBUSA_SCL (open-drain), FSIRXA_D1, EQEP1_B, LINB_RX, HIC_A4, SPIB_SOMI and HIC_D12."
      },
      {
        "number": "67",
        "name": "GPIO22",
        "type": "bidirectional",
        "description": "General-purpose I/O 22 with alternates EQEP1_STROBE, SPIB_CLK, LINA_TX, CLB_OUTPUTXBAR1, LINB_TX, HIC_A5, EPWM4_A and HIC_D13."
      },
      {
        "number": "68",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "General-purpose I/O 7 with alternates EPWM4_B, OUTPUTXBAR5, EQEP1_B, SPIB_SIMO, FSITXA_CLK, CLB_OUTPUTXBAR2, HIC_A6 and HIC_D14."
      },
      {
        "number": "69",
        "name": "GPIO44",
        "type": "bidirectional",
        "description": "General-purpose I/O 44 with alternates OUTPUTXBAR7, EQEP1_A, FSITXA_CLK, CLB_OUTPUTXBAR3, HIC_D7 and HIC_D5."
      },
      {
        "number": "70",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground; all VSS pins must be connected to board ground."
      },
      {
        "number": "71",
        "name": "VDD",
        "type": "power_in",
        "description": "1.2 V digital logic supply pin, generated internally by VREG; decoupling capacitance is required on VDD."
      },
      {
        "number": "72",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3 V digital I/O supply pin; see the power management module section for usage."
      },
      {
        "number": "73",
        "name": "GPIO45",
        "type": "bidirectional",
        "description": "General-purpose I/O 45 with alternates OUTPUTXBAR8, FSITXA_D0, CLB_OUTPUTXBAR4 and HIC_D6."
      },
      {
        "number": "74",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "General-purpose I/O 5 with alternates EPWM3_B, OUTPUTXBAR3, CANA_RX, SPIA_STE, FSITXA_D1, CLB_OUTPUTXBAR5, HIC_A7, HIC_D4 and HIC_D15."
      },
      {
        "number": "75",
        "name": "GPIO9",
        "type": "bidirectional",
        "description": "General-purpose I/O 9 with alternates EPWM5_B, OUTPUTXBAR6, EQEP1_INDEX, SCIA_RX, SPIA_CLK, FSITXA_D0, LINB_RX, HIC_BASESEL0, I2CB_SCL (open-drain) and HIC_NRDY."
      },
      {
        "number": "76",
        "name": "GPIO10",
        "type": "bidirectional",
        "description": "General-purpose I/O 10 with alternates EPWM6_A, ADCSOCBO, EQEP1_A, SPIA_SOMI, I2CA_SDA (open-drain), FSITXA_CLK, LINB_TX, HIC_NWE and FSITXA_TDM_D0."
      },
      {
        "number": "77",
        "name": "GPIO34",
        "type": "bidirectional",
        "description": "General-purpose I/O 34 with alternates OUTPUTXBAR1, PMBUSA_SDA (open-drain), HIC_NBE1, I2CB_SDA (open-drain) and HIC_D9."
      },
      {
        "number": "78",
        "name": "GPIO15",
        "type": "bidirectional",
        "description": "General-purpose I/O 15 with alternates I2CB_SCL (open-drain), OUTPUTXBAR4, PMBUSA_SCL (open-drain), SPIB_STE, EQEP2_B, LINB_RX, EPWM3_B, CLB_OUTPUTXBAR6 and HIC_D12."
      },
      {
        "number": "79",
        "name": "GPIO14",
        "type": "bidirectional",
        "description": "General-purpose I/O 14 with alternates I2CB_SDA (open-drain), OUTPUTXBAR3, PMBUSA_SDA (open-drain), SPIB_CLK, EQEP2_A, LINB_TX, EPWM3_A, CLB_OUTPUTXBAR7 and HIC_D15."
      },
      {
        "number": "80",
        "name": "GPIO6",
        "type": "bidirectional",
        "description": "General-purpose I/O 6 with alternates EPWM4_A, OUTPUTXBAR4, SYNCOUT, EQEP1_A, SPIB_SOMI, FSITXA_D0, FSITXA_D1, HIC_NBE1 and CLB_OUTPUTXBAR8."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN F280025CPNQR is not listed by name in the provided text. The ordering addendum (page 225-226; Pin 12 is shared by A3, C5 and VDAC; VDAC is an optional external CMPSS DAC reference, and an intern; Pins 33 and 34 (FLT2 and FLT1) are TI-reserved flash test pins that must remain unconnected, so they"
        ],
        "pages_sent": 169,
        "cost_usd": 1.0718,
        "at": "2026-10-12T10:15:28"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/tms320f280025c",
        "pages": 245,
        "sha256": "0723d8e3e09e1f8b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 80,
        "described": 80,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "f280025cpnqr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          14,
          14,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f782bdbc6327d920be33e2b9906695d7c3690117933775c3f145eac71f2013ac",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "f280025cpnqr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          14,
          14,
          1.5
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "40c10ca5df65d0682bfdb1ae28aaa98b44d0d9d995ca1b500461a61cbd8dfc07",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "LQFP-80(12x12)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "80"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "f280025cpnqr"
  ],
  "discovery_pitch": "F280025CPNQR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "f280025cpnqr.kicad_sym",
    "f280025cpnqr.kicad_mod",
    "f280025cpnqr.glb",
    "f280025cpnqr.step",
    "f280025cpnqr.lbr",
    "docs/hero.png",
    "docs/f280025cpnqr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "f280025cpnqr-hero.glb",
    "f280025cpnqr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}