component
F2800156QPNRQ1
Public Made by Adomby adom
TI(德州仪器) , LQFP-80(12x12). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
6da29ae
F2800156QPNRQ1
TI(德州仪器) · IC · LQFP-80(12x12)
F2800156QPNRQ1 from TI(德州仪器), in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO30 | bidirectional | General-purpose input/output 30 with digital mux functions (Table 5-6). |
| 2 | GPIO31 | bidirectional | General-purpose input/output 31 with digital mux functions (Table 5-6). |
| 3 | GPIO29 | bidirectional | General-purpose input/output 29 with digital mux functions (Table 5-6). |
| 4 | A16/C16,GPIO28 | bidirectional | ADC-A input 16 / ADC-C input 16 analog pin that is also GPIO28 (AGPIO) with full digital input and output. |
| 5 | XRSn | bidirectional | Device reset pin with an always-active internal pullup. |
| 6 | GPIO46 | bidirectional | General-purpose input/output 46 with LINA_TX, MCAN_TX and PMBUSA_SDA mux options. |
| 7 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 8 | VDD | power_in | 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits. |
| 9 | VSS | power_in | Digital ground; connect to board ground. |
| 10 | A6,GPIO228 | bidirectional | ADC-A input 6 bonded with GPIO228 (AGPIO) with full digital input and output. |
| 11 | C6,GPIO226 | bidirectional | ADC-C input 6 bonded with GPIO226 (AGPIO) with full digital input and output. |
| 12 | A3/C5,GPIO242 | bidirectional | ADC-A input 3 / ADC-C input 5 analog pin that is also GPIO242 (AGPIO), with CMPSS-3 inputs. |
| 13 | A2/C9,GPIO224 | bidirectional | ADC-A input 2 / ADC-C input 9 analog pin that is also GPIO224 (AGPIO), with CMPSS-1 inputs. |
| 14 | A15/C7 | input | ADC-A input 15 / ADC-C input 7 analog pin, also usable as digital input AIO233. |
| 15 | C4/A14 | input | ADC-C input 4 / ADC-A input 14 analog pin, also usable as digital input AIO239. |
| 16 | A11/C0 | input | ADC-A input 11 / ADC-C input 0 analog pin, also usable as digital input AIO237. |
| 17 | A5/C2 | input | ADC-A input 5 / ADC-C input 2 analog pin with CMPSS-3 inputs, also digital input AIO244. |
| 18 | A1 | input | ADC-A input 1 with CMPSS-1 positive input 4, also digital input AIO232. |
| 19 | A0/C15/CMP1_DACL | input | ADC-A input 0 / ADC-C input 15 / CMPSS-1 low DAC output, also digital input AIO231. |
| 20 | VREFHI | input | ADC high reference pin; tie to VDDA if the ADC is not used. |
| 21 | VREFLO | input | ADC low reference pin; tie to VSSA if unused. |
| 22 | A12/C1 | input | ADC-A input 12 / ADC-C input 1 analog pin, also digital input AIO238. |
| 23 | A7/C3 | input | ADC-A input 7 / ADC-C input 3 analog pin, also digital input AIO245. |
| 24 | A8/C11 | input | ADC-A input 8 / ADC-C input 11 analog pin, also digital input AIO241. |
| 25 | VSSA | power_in | Analog ground; tie to VSS if no separate analog ground is used. |
| 26 | VDDA | power_in | 3.3-V analog power pin needing a minimum 2.2-µF decoupling capacitor; tie to VDDIO if no dedicated analog supply. |
| 27 | A4/C14 | input | ADC-A input 4 / ADC-C input 14 analog pin with CMPSS-2/4 inputs, also digital input AIO225. |
| 28 | C8/A9,GPIO227 | bidirectional | ADC-C input 8 / ADC-A input 9 analog pin that is also GPIO227 (AGPIO). |
| 29 | A10/C10,GPIO230 | bidirectional | ADC-A input 10 / ADC-C input 10 analog pin that is also GPIO230 (AGPIO). |
| 30 | VSS | power_in | Digital ground; connect to board ground. |
| 31 | GPIO48 | bidirectional | General-purpose input/output 48 with OUTPUTXBAR3, CANA_TX, MCAN_TX, SCIA_TX and PMBUSA_SDA mux options. |
| 32 | GPIO49 | bidirectional | General-purpose input/output 49 with OUTPUTXBAR4, CANA_RX, MCAN_RX, SCIA_RX and LINA_RX mux options. |
| 33 | A17/C17,GPIO20 | bidirectional | ADC-A input 17 / ADC-C input 17 analog pin that is also GPIO20 (AGPIO) with eQEP1_A, CANA_TX and SPIA_SIMO mux options. |
| 34 | A18/C18,GPIO21 | bidirectional | ADC-A input 18 / ADC-C input 18 analog pin that is also GPIO21 (AGPIO) with eQEP1_B, CANA_RX and SPIA_SOMI mux options. |
| 35 | A19/C19,GPIO13 | bidirectional | ADC-A input 19 / ADC-C input 19 analog pin that is also GPIO13 (AGPIO) with ePWM7_B and MCAN_TX mux options. |
| 36 | A20/C20,GPIO12 | bidirectional | ADC-A input 20 / ADC-C input 20 analog pin that is also GPIO12 (AGPIO) with ePWM7_A and MCAN_RX mux options. |
| 37 | GPIO11 | bidirectional | General-purpose input/output 11 with ePWM6_B, CANA_RX and OUTPUTXBAR7 mux options. |
| 38 | GPIO33 | bidirectional | General-purpose input/output 33 with digital mux functions. |
| 39 | GPIO16 | bidirectional | General-purpose input/output 16 with SPIA_SIMO, ePWM5_A, SCIA_TX and XCLKOUT mux options. |
| 40 | GPIO17 | bidirectional | General-purpose input/output 17 with SPIA_SOMI, ePWM5_B, SCIA_RX and CANA_TX mux options. |
| 41 | GPIO24 | bidirectional | General-purpose input/output 24 with OUTPUTXBAR1, SPIA_STE, ePWM4_A and ERRORSTS (requires external pulldown) mux options. |
| 42 | GPIO25 | bidirectional | General-purpose input/output 25 with OUTPUTXBAR2, eQEP2_B, PMBUSA_SDA and SCIA_RX mux options. |
| 43 | GPIO26 | bidirectional | General-purpose input/output 26 with OUTPUTXBAR3, eQEP2_INDEX, PMBUSA_CTL and I2CA_SDA mux options. |
| 44 | GPIO27 | bidirectional | General-purpose input/output 27 with OUTPUTXBAR4, eQEP2_STROBE, PMBUSA_ALERT and I2CA_SCL mux options. |
| 45 | TCK | input | JTAG test clock with an always-active internal pullup; may be left unconnected or pulled up if unused. |
| 46 | GPIO37/TDO | bidirectional | GPIO37 defaulting to JTAG TDO output, tri-stated without JTAG activity, so enable the internal pullup or add an external pullup. |
| 47 | TMS | input | JTAG test mode select with an always-active internal pullup; use a pullup resistor if unused. |
| 48 | GPIO35/TDI | bidirectional | GPIO35 defaulting to JTAG TDI input; enable the internal pullup or add an external pullup to avoid a floating input. |
| 49 | GPIO32 | bidirectional | General-purpose input/output 32 with digital mux functions. |
| 50 | GPIO18,X2 | bidirectional | GPIO18 with SPIA_CLK, SCIB_TX, CANA_RX and XCLKOUT mux options; also crystal oscillator output X2. |
| 51 | GPIO19,X1 | bidirectional | GPIO19 with SPIA_STE, SCIB_RX, CANA_TX and ExtR options; also crystal input or single-ended 3.3-V clock input X1. |
| 52 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 53 | VDD | power_in | 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits. |
| 54 | GPIO43 | bidirectional | General-purpose input/output 43 with OUTPUTXBAR6, PMBUSA_ALERT, I2CA_SCL and SCIC_TX mux options. |
| 55 | VSS | power_in | Digital ground; connect to board ground. |
| 56 | VREGENZ | input | Internal VREG enable with internal pulldown; tie low to VSS to enable the internal VREG or high to VDDIO to use an external supply. |
| 57 | GPIO42 | bidirectional | General-purpose input/output 42 with LINA_RX, OUTPUTXBAR5, PMBUSA_CTL, I2CA_SDA and SCIC_RX mux options; located near the PMM so avoid negative noise. |
| 58 | GPIO8 | bidirectional | General-purpose input/output 8 with ePWM5_A, ADCSOCAO, SCIA_TX and SPIA_SIMO mux options; located near the PMM. |
| 59 | GPIO4 | bidirectional | General-purpose input/output 4 with digital mux functions; located near the PMM so avoid negative noise. |
| 60 | GPIO3 | bidirectional | General-purpose input/output 3 with digital mux functions; located near the PMM so avoid negative noise. |
| 61 | GPIO2 | bidirectional | General-purpose input/output 2 with digital mux functions; located near the PMM so avoid negative noise. |
| 62 | GPIO1 | bidirectional | General-purpose input/output 1 with digital mux functions; located near the PMM so avoid negative noise. |
| 63 | GPIO0 | bidirectional | General-purpose input/output 0 with digital mux functions; located near the PMM so avoid negative noise. |
| 64 | GPIO40 | bidirectional | General-purpose input/output 40 with ePWM2_B, PMBUSA_SDA, SCIB_TX and eQEP1_A mux options. |
| 65 | GPIO23 | bidirectional | General-purpose input/output 23 with eQEP1_INDEX, SCIB_RX, LINA_RX and ePWM4_B mux options. |
| 66 | GPIO41 | bidirectional | General-purpose input/output 41 with ePWM2_A, PMBUSA_SCL, SCIB_RX and eQEP1_B mux options. |
| 67 | GPIO22 | bidirectional | General-purpose input/output 22 with eQEP1_STROBE, SCIB_TX, LINA_TX and ePWM4_A mux options. |
| 68 | GPIO7 | bidirectional | General-purpose input/output 7 with digital mux functions. |
| 69 | GPIO44 | bidirectional | General-purpose input/output 44 with OUTPUTXBAR7, eQEP1_A, PMBUSA_SDA and PMBUSA_CTL mux options. |
| 70 | VSS | power_in | Digital ground; connect to board ground. |
| 71 | VDD | power_in | 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits. |
| 72 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 73 | GPIO45 | bidirectional | General-purpose input/output 45 with OUTPUTXBAR8 and PMBUSA_ALERT mux options. |
| 74 | GPIO5 | bidirectional | General-purpose input/output 5 with digital mux functions. |
| 75 | GPIO9 | bidirectional | General-purpose input/output 9 with ePWM5_B, SCIB_TX, OUTPUTXBAR6 and SCIA_RX mux options. |
| 76 | GPIO10 | bidirectional | General-purpose input/output 10 with ePWM6_A, ADCSOCBO, eQEP1_A and SCIB_TX mux options. |
| 77 | GPIO34 | bidirectional | General-purpose input/output 34 with digital mux functions. |
| 78 | GPIO15 | bidirectional | General-purpose input/output 15 with SCIB_RX, I2CB_SCL, OUTPUTXBAR4 and PMBUSA_SCL mux options. |
| 79 | GPIO14 | bidirectional | General-purpose input/output 14 with SCIB_TX, I2CB_SDA, OUTPUTXBAR3 and PMBUSA_SDA mux options. |
| 80 | GPIO6 | bidirectional | General-purpose input/output 6 with SYNCOUT mux option and other digital mux functions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | LQFP-80(12x12) |
| Category | |
| Pins | 80 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage | VDD | -0.3 | 1.5 | V | with respect to VSS | 47 | |
| VDDIO supply voltage | VDDIO | -0.3 | 4.6 | V | with respect to VSS | 47 | |
| VDDA supply voltage | VDDA | -0.3 | 4.6 | V | with respect to VSSA | 47 | |
| Input voltage | VIN | -0.3 | 4.6 | V | VIN (3.3 V) | 47 | |
| Output voltage | VO | -0.3 | 4.6 | V | 47 | ||
| Input clamp current per pin | IIK | -20 | 20 | mA | VIN < VSS/VSSA; VIN > VDDIO/VDDA | 47 | |
| Input clamp current total for all pins | IIKTOTAL | -20 | 20 | mA | VIN < VSS/VSSA; VIN > VDDIO/VDDA | 47 | |
| Digital output current per pin | IOUT | -20 | 20 | mA | 47 | ||
| Operating junction temperature | TJ | -40 | 155 | °C | 47 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 47 | ||
| ESD HBM | V(ESD) | -2000 | 2000 | V | HBM, AEC Q100-002, all pins, 80-pin PN | 48 | |
| ESD CDM all pins | V(ESD) | -500 | 500 | V | CDM, AEC Q100-011, all pins, 80-pin PN | 48 | |
| ESD CDM corner pins | V(ESD) | -750 | 750 | V | CDM, corner pins 1, 20, 21, 40, 41, 60, 61, 80 on 80-pin PN | 48 | |
| Device supply voltage VDDIO and VDDA, BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 48 |
| Device supply voltage VDDIO and VDDA, BOR enabled | VDDIO, VDDA | 3.3 | 3.63 | V | Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB | 48 | |
| Device supply voltage VDD | VDD | 1.14 | 1.2 | 1.32 | V | 48 | |
| Junction temperature | TJ | -40 | 140 | °C | F280015xS, F280015xQ parts | 48 | |
| Free-air temperature | TA | -40 | 125 | °C | F280015xS, F280015xQ parts | 48 | |
| Low-level output voltage | VOL | 0.4 | V | IOL = IOL MAX | 59 | ||
| Low-level output voltage | VOL | 0.2 | V | IOL = 100 µA | 59 | ||
| High-level output source current for all output pins | IOH | -4 | mA | 59 | |||
| Low-level output sink current for all output pins | IOL | 4 | mA | 59 | |||
| High-level output impedance for all output pins | ROH | 50 | 65 | 96 | Ω | VOH=VDDS-0.4V | 59 |
| Low-level output impedance for all output pins | ROL | 48 | 60 | 84 | Ω | VOL=0.4V | 59 |
| High-level input voltage | VIH | 2 | V | 59 | |||
| Low-level input voltage | VIL | 0.8 | V | 59 | |||
| Weak pulldown resistance | RPULLDOWN | 22.66 | 31.49 | 61.55 | kΩ | 59 | |
| Weak pullup resistance | RPULLUP | 19.89 | 29.45 | 53.63 | kΩ | 59 | |
| Internal voltage regulator output | VVREG | 1.152 | 1.2 | 1.248 | V | 71 | |
| VDDIO brown out reset voltage on ramp down | VBOR-VDDIO-DOWN | 2.81 | 3 | V | After XRSn release | 71 | |
| Supply ramp rate of 3.3V rails | SRVDD33 | 20 | 100 | mV/us | VDDIO, VDDA | 71 | |
| Total nominal VDD capacitance, internal VREG | CVDD TOTAL | 10 | 22 | uF | Internal VREG | 71 | |
| Frequency, X1/X2 from external crystal or resonator | f(XTAL) | 10 | 20 | MHz | 79 | ||
| Frequency, X1 from external oscillator | f(X1) | 10 | 25 | MHz | 79 | ||
| Frequency, device (system) clock | f(SYSCLK) | 2 | 120 | MHz | 80 | ||
| Hold time for boot-mode pins | th(boot-mode) | 1.5 | ms | 74 | |||
| Pulse duration, XRSn low on warm reset | tw(RSL2) | 3.2 | µs | 74 | |||
| Junction-to-case thermal resistance, top | RΘJC | 17.7 | °C/W | PN package | 60 | ||
| Junction-to-board thermal resistance | RΘJB | 36.5 | °C/W | PN package | 60 | ||
| Junction-to-free air thermal resistance | RΘJA | 56.7 | °C/W | High k PCB, PN package | 60 | ||
| Junction-to-package top | Psi JT | 0.8 | °C/W | PN package | 60 | ||
| Junction-to-board | Psi JB | 36 | °C/W | PN package | 60 | ||
| VDDIO current, operating mode | IDDIO | 71.22 | mA | 125 ℃, VREG enabled, CPU running from RAM, PLL at max SYSCLK | 49 | ||
| VDDA current, operating mode | IDDA | 2.5 | mA | 125 ℃, VREG enabled | 49 |
CAD (KiCad official)
- Symbol:
F2800156QPNRQ1 - Footprint:
Package_QFP:LQFP-80_12x12mm_P0.5mm - 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files:
f2800156qpnrq1-etched.step/f2800156qpnrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);f2800156qpnrq1.step/f2800156qpnrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TI(德州仪器) datasheet (252 pp, sha256
e5e9c14e326ac962, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# F2800156QPNRQ1
**TI(德州仪器)** · IC · LQFP-80(12x12)
F2800156QPNRQ1 from TI(德州仪器), in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO30 | bidirectional | General-purpose input/output 30 with digital mux functions (Table 5-6). |
| 2 | GPIO31 | bidirectional | General-purpose input/output 31 with digital mux functions (Table 5-6). |
| 3 | GPIO29 | bidirectional | General-purpose input/output 29 with digital mux functions (Table 5-6). |
| 4 | A16/C16,GPIO28 | bidirectional | ADC-A input 16 / ADC-C input 16 analog pin that is also GPIO28 (AGPIO) with full digital input and output. |
| 5 | XRSn | bidirectional | Device reset pin with an always-active internal pullup. |
| 6 | GPIO46 | bidirectional | General-purpose input/output 46 with LINA_TX, MCAN_TX and PMBUSA_SDA mux options. |
| 7 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 8 | VDD | power_in | 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits. |
| 9 | VSS | power_in | Digital ground; connect to board ground. |
| 10 | A6,GPIO228 | bidirectional | ADC-A input 6 bonded with GPIO228 (AGPIO) with full digital input and output. |
| 11 | C6,GPIO226 | bidirectional | ADC-C input 6 bonded with GPIO226 (AGPIO) with full digital input and output. |
| 12 | A3/C5,GPIO242 | bidirectional | ADC-A input 3 / ADC-C input 5 analog pin that is also GPIO242 (AGPIO), with CMPSS-3 inputs. |
| 13 | A2/C9,GPIO224 | bidirectional | ADC-A input 2 / ADC-C input 9 analog pin that is also GPIO224 (AGPIO), with CMPSS-1 inputs. |
| 14 | A15/C7 | input | ADC-A input 15 / ADC-C input 7 analog pin, also usable as digital input AIO233. |
| 15 | C4/A14 | input | ADC-C input 4 / ADC-A input 14 analog pin, also usable as digital input AIO239. |
| 16 | A11/C0 | input | ADC-A input 11 / ADC-C input 0 analog pin, also usable as digital input AIO237. |
| 17 | A5/C2 | input | ADC-A input 5 / ADC-C input 2 analog pin with CMPSS-3 inputs, also digital input AIO244. |
| 18 | A1 | input | ADC-A input 1 with CMPSS-1 positive input 4, also digital input AIO232. |
| 19 | A0/C15/CMP1_DACL | input | ADC-A input 0 / ADC-C input 15 / CMPSS-1 low DAC output, also digital input AIO231. |
| 20 | VREFHI | input | ADC high reference pin; tie to VDDA if the ADC is not used. |
| 21 | VREFLO | input | ADC low reference pin; tie to VSSA if unused. |
| 22 | A12/C1 | input | ADC-A input 12 / ADC-C input 1 analog pin, also digital input AIO238. |
| 23 | A7/C3 | input | ADC-A input 7 / ADC-C input 3 analog pin, also digital input AIO245. |
| 24 | A8/C11 | input | ADC-A input 8 / ADC-C input 11 analog pin, also digital input AIO241. |
| 25 | VSSA | power_in | Analog ground; tie to VSS if no separate analog ground is used. |
| 26 | VDDA | power_in | 3.3-V analog power pin needing a minimum 2.2-µF decoupling capacitor; tie to VDDIO if no dedicated analog supply. |
| 27 | A4/C14 | input | ADC-A input 4 / ADC-C input 14 analog pin with CMPSS-2/4 inputs, also digital input AIO225. |
| 28 | C8/A9,GPIO227 | bidirectional | ADC-C input 8 / ADC-A input 9 analog pin that is also GPIO227 (AGPIO). |
| 29 | A10/C10,GPIO230 | bidirectional | ADC-A input 10 / ADC-C input 10 analog pin that is also GPIO230 (AGPIO). |
| 30 | VSS | power_in | Digital ground; connect to board ground. |
| 31 | GPIO48 | bidirectional | General-purpose input/output 48 with OUTPUTXBAR3, CANA_TX, MCAN_TX, SCIA_TX and PMBUSA_SDA mux options. |
| 32 | GPIO49 | bidirectional | General-purpose input/output 49 with OUTPUTXBAR4, CANA_RX, MCAN_RX, SCIA_RX and LINA_RX mux options. |
| 33 | A17/C17,GPIO20 | bidirectional | ADC-A input 17 / ADC-C input 17 analog pin that is also GPIO20 (AGPIO) with eQEP1_A, CANA_TX and SPIA_SIMO mux options. |
| 34 | A18/C18,GPIO21 | bidirectional | ADC-A input 18 / ADC-C input 18 analog pin that is also GPIO21 (AGPIO) with eQEP1_B, CANA_RX and SPIA_SOMI mux options. |
| 35 | A19/C19,GPIO13 | bidirectional | ADC-A input 19 / ADC-C input 19 analog pin that is also GPIO13 (AGPIO) with ePWM7_B and MCAN_TX mux options. |
| 36 | A20/C20,GPIO12 | bidirectional | ADC-A input 20 / ADC-C input 20 analog pin that is also GPIO12 (AGPIO) with ePWM7_A and MCAN_RX mux options. |
| 37 | GPIO11 | bidirectional | General-purpose input/output 11 with ePWM6_B, CANA_RX and OUTPUTXBAR7 mux options. |
| 38 | GPIO33 | bidirectional | General-purpose input/output 33 with digital mux functions. |
| 39 | GPIO16 | bidirectional | General-purpose input/output 16 with SPIA_SIMO, ePWM5_A, SCIA_TX and XCLKOUT mux options. |
| 40 | GPIO17 | bidirectional | General-purpose input/output 17 with SPIA_SOMI, ePWM5_B, SCIA_RX and CANA_TX mux options. |
| 41 | GPIO24 | bidirectional | General-purpose input/output 24 with OUTPUTXBAR1, SPIA_STE, ePWM4_A and ERRORSTS (requires external pulldown) mux options. |
| 42 | GPIO25 | bidirectional | General-purpose input/output 25 with OUTPUTXBAR2, eQEP2_B, PMBUSA_SDA and SCIA_RX mux options. |
| 43 | GPIO26 | bidirectional | General-purpose input/output 26 with OUTPUTXBAR3, eQEP2_INDEX, PMBUSA_CTL and I2CA_SDA mux options. |
| 44 | GPIO27 | bidirectional | General-purpose input/output 27 with OUTPUTXBAR4, eQEP2_STROBE, PMBUSA_ALERT and I2CA_SCL mux options. |
| 45 | TCK | input | JTAG test clock with an always-active internal pullup; may be left unconnected or pulled up if unused. |
| 46 | GPIO37/TDO | bidirectional | GPIO37 defaulting to JTAG TDO output, tri-stated without JTAG activity, so enable the internal pullup or add an external pullup. |
| 47 | TMS | input | JTAG test mode select with an always-active internal pullup; use a pullup resistor if unused. |
| 48 | GPIO35/TDI | bidirectional | GPIO35 defaulting to JTAG TDI input; enable the internal pullup or add an external pullup to avoid a floating input. |
| 49 | GPIO32 | bidirectional | General-purpose input/output 32 with digital mux functions. |
| 50 | GPIO18,X2 | bidirectional | GPIO18 with SPIA_CLK, SCIB_TX, CANA_RX and XCLKOUT mux options; also crystal oscillator output X2. |
| 51 | GPIO19,X1 | bidirectional | GPIO19 with SPIA_STE, SCIB_RX, CANA_TX and ExtR options; also crystal input or single-ended 3.3-V clock input X1. |
| 52 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 53 | VDD | power_in | 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits. |
| 54 | GPIO43 | bidirectional | General-purpose input/output 43 with OUTPUTXBAR6, PMBUSA_ALERT, I2CA_SCL and SCIC_TX mux options. |
| 55 | VSS | power_in | Digital ground; connect to board ground. |
| 56 | VREGENZ | input | Internal VREG enable with internal pulldown; tie low to VSS to enable the internal VREG or high to VDDIO to use an external supply. |
| 57 | GPIO42 | bidirectional | General-purpose input/output 42 with LINA_RX, OUTPUTXBAR5, PMBUSA_CTL, I2CA_SDA and SCIC_RX mux options; located near the PMM so avoid negative noise. |
| 58 | GPIO8 | bidirectional | General-purpose input/output 8 with ePWM5_A, ADCSOCAO, SCIA_TX and SPIA_SIMO mux options; located near the PMM. |
| 59 | GPIO4 | bidirectional | General-purpose input/output 4 with digital mux functions; located near the PMM so avoid negative noise. |
| 60 | GPIO3 | bidirectional | General-purpose input/output 3 with digital mux functions; located near the PMM so avoid negative noise. |
| 61 | GPIO2 | bidirectional | General-purpose input/output 2 with digital mux functions; located near the PMM so avoid negative noise. |
| 62 | GPIO1 | bidirectional | General-purpose input/output 1 with digital mux functions; located near the PMM so avoid negative noise. |
| 63 | GPIO0 | bidirectional | General-purpose input/output 0 with digital mux functions; located near the PMM so avoid negative noise. |
| 64 | GPIO40 | bidirectional | General-purpose input/output 40 with ePWM2_B, PMBUSA_SDA, SCIB_TX and eQEP1_A mux options. |
| 65 | GPIO23 | bidirectional | General-purpose input/output 23 with eQEP1_INDEX, SCIB_RX, LINA_RX and ePWM4_B mux options. |
| 66 | GPIO41 | bidirectional | General-purpose input/output 41 with ePWM2_A, PMBUSA_SCL, SCIB_RX and eQEP1_B mux options. |
| 67 | GPIO22 | bidirectional | General-purpose input/output 22 with eQEP1_STROBE, SCIB_TX, LINA_TX and ePWM4_A mux options. |
| 68 | GPIO7 | bidirectional | General-purpose input/output 7 with digital mux functions. |
| 69 | GPIO44 | bidirectional | General-purpose input/output 44 with OUTPUTXBAR7, eQEP1_A, PMBUSA_SDA and PMBUSA_CTL mux options. |
| 70 | VSS | power_in | Digital ground; connect to board ground. |
| 71 | VDD | power_in | 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits. |
| 72 | VDDIO | power_in | 3.3-V digital I/O power pin; all VDDIO pins must be connected. |
| 73 | GPIO45 | bidirectional | General-purpose input/output 45 with OUTPUTXBAR8 and PMBUSA_ALERT mux options. |
| 74 | GPIO5 | bidirectional | General-purpose input/output 5 with digital mux functions. |
| 75 | GPIO9 | bidirectional | General-purpose input/output 9 with ePWM5_B, SCIB_TX, OUTPUTXBAR6 and SCIA_RX mux options. |
| 76 | GPIO10 | bidirectional | General-purpose input/output 10 with ePWM6_A, ADCSOCBO, eQEP1_A and SCIB_TX mux options. |
| 77 | GPIO34 | bidirectional | General-purpose input/output 34 with digital mux functions. |
| 78 | GPIO15 | bidirectional | General-purpose input/output 15 with SCIB_RX, I2CB_SCL, OUTPUTXBAR4 and PMBUSA_SCL mux options. |
| 79 | GPIO14 | bidirectional | General-purpose input/output 14 with SCIB_TX, I2CB_SDA, OUTPUTXBAR3 and PMBUSA_SDA mux options. |
| 80 | GPIO6 | bidirectional | General-purpose input/output 6 with SYNCOUT mux option and other digital mux functions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | LQFP-80(12x12) |
| Category | |
| Pins | 80 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage | VDD | -0.3 | | 1.5 | V | with respect to VSS | 47 |
| VDDIO supply voltage | VDDIO | -0.3 | | 4.6 | V | with respect to VSS | 47 |
| VDDA supply voltage | VDDA | -0.3 | | 4.6 | V | with respect to VSSA | 47 |
| Input voltage | VIN | -0.3 | | 4.6 | V | VIN (3.3 V) | 47 |
| Output voltage | VO | -0.3 | | 4.6 | V | | 47 |
| Input clamp current per pin | IIK | -20 | | 20 | mA | VIN < VSS/VSSA; VIN > VDDIO/VDDA | 47 |
| Input clamp current total for all pins | IIKTOTAL | -20 | | 20 | mA | VIN < VSS/VSSA; VIN > VDDIO/VDDA | 47 |
| Digital output current per pin | IOUT | -20 | | 20 | mA | | 47 |
| Operating junction temperature | TJ | -40 | | 155 | °C | | 47 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 47 |
| ESD HBM | V(ESD) | -2000 | | 2000 | V | HBM, AEC Q100-002, all pins, 80-pin PN | 48 |
| ESD CDM all pins | V(ESD) | -500 | | 500 | V | CDM, AEC Q100-011, all pins, 80-pin PN | 48 |
| ESD CDM corner pins | V(ESD) | -750 | | 750 | V | CDM, corner pins 1, 20, 21, 40, 41, 60, 61, 80 on 80-pin PN | 48 |
| Device supply voltage VDDIO and VDDA, BOR disabled | VDDIO, VDDA | 2.8 | 3.3 | 3.63 | V | Internal BOR disabled | 48 |
| Device supply voltage VDDIO and VDDA, BOR enabled | VDDIO, VDDA | | 3.3 | 3.63 | V | Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB | 48 |
| Device supply voltage VDD | VDD | 1.14 | 1.2 | 1.32 | V | | 48 |
| Junction temperature | TJ | -40 | | 140 | °C | F280015xS, F280015xQ parts | 48 |
| Free-air temperature | TA | -40 | | 125 | °C | F280015xS, F280015xQ parts | 48 |
| Low-level output voltage | VOL | | | 0.4 | V | IOL = IOL MAX | 59 |
| Low-level output voltage | VOL | | | 0.2 | V | IOL = 100 µA | 59 |
| High-level output source current for all output pins | IOH | -4 | | | mA | | 59 |
| Low-level output sink current for all output pins | IOL | | | 4 | mA | | 59 |
| High-level output impedance for all output pins | ROH | 50 | 65 | 96 | Ω | VOH=VDDS-0.4V | 59 |
| Low-level output impedance for all output pins | ROL | 48 | 60 | 84 | Ω | VOL=0.4V | 59 |
| High-level input voltage | VIH | 2 | | | V | | 59 |
| Low-level input voltage | VIL | | | 0.8 | V | | 59 |
| Weak pulldown resistance | RPULLDOWN | 22.66 | 31.49 | 61.55 | kΩ | | 59 |
| Weak pullup resistance | RPULLUP | 19.89 | 29.45 | 53.63 | kΩ | | 59 |
| Internal voltage regulator output | VVREG | 1.152 | 1.2 | 1.248 | V | | 71 |
| VDDIO brown out reset voltage on ramp down | VBOR-VDDIO-DOWN | 2.81 | | 3 | V | After XRSn release | 71 |
| Supply ramp rate of 3.3V rails | SRVDD33 | 20 | | 100 | mV/us | VDDIO, VDDA | 71 |
| Total nominal VDD capacitance, internal VREG | CVDD TOTAL | 10 | | 22 | uF | Internal VREG | 71 |
| Frequency, X1/X2 from external crystal or resonator | f(XTAL) | 10 | | 20 | MHz | | 79 |
| Frequency, X1 from external oscillator | f(X1) | 10 | | 25 | MHz | | 79 |
| Frequency, device (system) clock | f(SYSCLK) | 2 | | 120 | MHz | | 80 |
| Hold time for boot-mode pins | th(boot-mode) | 1.5 | | | ms | | 74 |
| Pulse duration, XRSn low on warm reset | tw(RSL2) | 3.2 | | | µs | | 74 |
| Junction-to-case thermal resistance, top | RΘJC | | 17.7 | | °C/W | PN package | 60 |
| Junction-to-board thermal resistance | RΘJB | | 36.5 | | °C/W | PN package | 60 |
| Junction-to-free air thermal resistance | RΘJA | | 56.7 | | °C/W | High k PCB, PN package | 60 |
| Junction-to-package top | Psi JT | | 0.8 | | °C/W | PN package | 60 |
| Junction-to-board | Psi JB | | 36 | | °C/W | PN package | 60 |
| VDDIO current, operating mode | IDDIO | | 71.22 | | mA | 125 ℃, VREG enabled, CPU running from RAM, PLL at max SYSCLK | 49 |
| VDDA current, operating mode | IDDA | | 2.5 | | mA | 125 ℃, VREG enabled | 49 |
## CAD (KiCad official)
- Symbol: `F2800156QPNRQ1`
- Footprint: `Package_QFP:LQFP-80_12x12mm_P0.5mm`
- 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
- 3D model files: `f2800156qpnrq1-etched.step` / `f2800156qpnrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `f2800156qpnrq1.step` / `f2800156qpnrq1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TI(德州仪器) datasheet](https://www.ti.com/lit/ds/symlink/tms320f2800154-q1.pdf?ts=1701298430020) (252 pp, sha256 `e5e9c14e326ac962`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/f2800156qpnrq1-datasheet.pdf)