Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

F2800156QPNRQ1

TI(德州仪器) · IC · LQFP-80(12x12)

F2800156QPNRQ1 from TI(德州仪器), in a LQFP-80(12x12). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GPIO30 bidirectional General-purpose input/output 30 with digital mux functions (Table 5-6).
2 GPIO31 bidirectional General-purpose input/output 31 with digital mux functions (Table 5-6).
3 GPIO29 bidirectional General-purpose input/output 29 with digital mux functions (Table 5-6).
4 A16/C16,GPIO28 bidirectional ADC-A input 16 / ADC-C input 16 analog pin that is also GPIO28 (AGPIO) with full digital input and output.
5 XRSn bidirectional Device reset pin with an always-active internal pullup.
6 GPIO46 bidirectional General-purpose input/output 46 with LINA_TX, MCAN_TX and PMBUSA_SDA mux options.
7 VDDIO power_in 3.3-V digital I/O power pin; all VDDIO pins must be connected.
8 VDD power_in 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits.
9 VSS power_in Digital ground; connect to board ground.
10 A6,GPIO228 bidirectional ADC-A input 6 bonded with GPIO228 (AGPIO) with full digital input and output.
11 C6,GPIO226 bidirectional ADC-C input 6 bonded with GPIO226 (AGPIO) with full digital input and output.
12 A3/C5,GPIO242 bidirectional ADC-A input 3 / ADC-C input 5 analog pin that is also GPIO242 (AGPIO), with CMPSS-3 inputs.
13 A2/C9,GPIO224 bidirectional ADC-A input 2 / ADC-C input 9 analog pin that is also GPIO224 (AGPIO), with CMPSS-1 inputs.
14 A15/C7 input ADC-A input 15 / ADC-C input 7 analog pin, also usable as digital input AIO233.
15 C4/A14 input ADC-C input 4 / ADC-A input 14 analog pin, also usable as digital input AIO239.
16 A11/C0 input ADC-A input 11 / ADC-C input 0 analog pin, also usable as digital input AIO237.
17 A5/C2 input ADC-A input 5 / ADC-C input 2 analog pin with CMPSS-3 inputs, also digital input AIO244.
18 A1 input ADC-A input 1 with CMPSS-1 positive input 4, also digital input AIO232.
19 A0/C15/CMP1_DACL input ADC-A input 0 / ADC-C input 15 / CMPSS-1 low DAC output, also digital input AIO231.
20 VREFHI input ADC high reference pin; tie to VDDA if the ADC is not used.
21 VREFLO input ADC low reference pin; tie to VSSA if unused.
22 A12/C1 input ADC-A input 12 / ADC-C input 1 analog pin, also digital input AIO238.
23 A7/C3 input ADC-A input 7 / ADC-C input 3 analog pin, also digital input AIO245.
24 A8/C11 input ADC-A input 8 / ADC-C input 11 analog pin, also digital input AIO241.
25 VSSA power_in Analog ground; tie to VSS if no separate analog ground is used.
26 VDDA power_in 3.3-V analog power pin needing a minimum 2.2-µF decoupling capacitor; tie to VDDIO if no dedicated analog supply.
27 A4/C14 input ADC-A input 4 / ADC-C input 14 analog pin with CMPSS-2/4 inputs, also digital input AIO225.
28 C8/A9,GPIO227 bidirectional ADC-C input 8 / ADC-A input 9 analog pin that is also GPIO227 (AGPIO).
29 A10/C10,GPIO230 bidirectional ADC-A input 10 / ADC-C input 10 analog pin that is also GPIO230 (AGPIO).
30 VSS power_in Digital ground; connect to board ground.
31 GPIO48 bidirectional General-purpose input/output 48 with OUTPUTXBAR3, CANA_TX, MCAN_TX, SCIA_TX and PMBUSA_SDA mux options.
32 GPIO49 bidirectional General-purpose input/output 49 with OUTPUTXBAR4, CANA_RX, MCAN_RX, SCIA_RX and LINA_RX mux options.
33 A17/C17,GPIO20 bidirectional ADC-A input 17 / ADC-C input 17 analog pin that is also GPIO20 (AGPIO) with eQEP1_A, CANA_TX and SPIA_SIMO mux options.
34 A18/C18,GPIO21 bidirectional ADC-A input 18 / ADC-C input 18 analog pin that is also GPIO21 (AGPIO) with eQEP1_B, CANA_RX and SPIA_SOMI mux options.
35 A19/C19,GPIO13 bidirectional ADC-A input 19 / ADC-C input 19 analog pin that is also GPIO13 (AGPIO) with ePWM7_B and MCAN_TX mux options.
36 A20/C20,GPIO12 bidirectional ADC-A input 20 / ADC-C input 20 analog pin that is also GPIO12 (AGPIO) with ePWM7_A and MCAN_RX mux options.
37 GPIO11 bidirectional General-purpose input/output 11 with ePWM6_B, CANA_RX and OUTPUTXBAR7 mux options.
38 GPIO33 bidirectional General-purpose input/output 33 with digital mux functions.
39 GPIO16 bidirectional General-purpose input/output 16 with SPIA_SIMO, ePWM5_A, SCIA_TX and XCLKOUT mux options.
40 GPIO17 bidirectional General-purpose input/output 17 with SPIA_SOMI, ePWM5_B, SCIA_RX and CANA_TX mux options.
41 GPIO24 bidirectional General-purpose input/output 24 with OUTPUTXBAR1, SPIA_STE, ePWM4_A and ERRORSTS (requires external pulldown) mux options.
42 GPIO25 bidirectional General-purpose input/output 25 with OUTPUTXBAR2, eQEP2_B, PMBUSA_SDA and SCIA_RX mux options.
43 GPIO26 bidirectional General-purpose input/output 26 with OUTPUTXBAR3, eQEP2_INDEX, PMBUSA_CTL and I2CA_SDA mux options.
44 GPIO27 bidirectional General-purpose input/output 27 with OUTPUTXBAR4, eQEP2_STROBE, PMBUSA_ALERT and I2CA_SCL mux options.
45 TCK input JTAG test clock with an always-active internal pullup; may be left unconnected or pulled up if unused.
46 GPIO37/TDO bidirectional GPIO37 defaulting to JTAG TDO output, tri-stated without JTAG activity, so enable the internal pullup or add an external pullup.
47 TMS input JTAG test mode select with an always-active internal pullup; use a pullup resistor if unused.
48 GPIO35/TDI bidirectional GPIO35 defaulting to JTAG TDI input; enable the internal pullup or add an external pullup to avoid a floating input.
49 GPIO32 bidirectional General-purpose input/output 32 with digital mux functions.
50 GPIO18,X2 bidirectional GPIO18 with SPIA_CLK, SCIB_TX, CANA_RX and XCLKOUT mux options; also crystal oscillator output X2.
51 GPIO19,X1 bidirectional GPIO19 with SPIA_STE, SCIB_RX, CANA_TX and ExtR options; also crystal input or single-ended 3.3-V clock input X1.
52 VDDIO power_in 3.3-V digital I/O power pin; all VDDIO pins must be connected.
53 VDD power_in 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits.
54 GPIO43 bidirectional General-purpose input/output 43 with OUTPUTXBAR6, PMBUSA_ALERT, I2CA_SCL and SCIC_TX mux options.
55 VSS power_in Digital ground; connect to board ground.
56 VREGENZ input Internal VREG enable with internal pulldown; tie low to VSS to enable the internal VREG or high to VDDIO to use an external supply.
57 GPIO42 bidirectional General-purpose input/output 42 with LINA_RX, OUTPUTXBAR5, PMBUSA_CTL, I2CA_SDA and SCIC_RX mux options; located near the PMM so avoid negative noise.
58 GPIO8 bidirectional General-purpose input/output 8 with ePWM5_A, ADCSOCAO, SCIA_TX and SPIA_SIMO mux options; located near the PMM.
59 GPIO4 bidirectional General-purpose input/output 4 with digital mux functions; located near the PMM so avoid negative noise.
60 GPIO3 bidirectional General-purpose input/output 3 with digital mux functions; located near the PMM so avoid negative noise.
61 GPIO2 bidirectional General-purpose input/output 2 with digital mux functions; located near the PMM so avoid negative noise.
62 GPIO1 bidirectional General-purpose input/output 1 with digital mux functions; located near the PMM so avoid negative noise.
63 GPIO0 bidirectional General-purpose input/output 0 with digital mux functions; located near the PMM so avoid negative noise.
64 GPIO40 bidirectional General-purpose input/output 40 with ePWM2_B, PMBUSA_SDA, SCIB_TX and eQEP1_A mux options.
65 GPIO23 bidirectional General-purpose input/output 23 with eQEP1_INDEX, SCIB_RX, LINA_RX and ePWM4_B mux options.
66 GPIO41 bidirectional General-purpose input/output 41 with ePWM2_A, PMBUSA_SCL, SCIB_RX and eQEP1_B mux options.
67 GPIO22 bidirectional General-purpose input/output 22 with eQEP1_STROBE, SCIB_TX, LINA_TX and ePWM4_A mux options.
68 GPIO7 bidirectional General-purpose input/output 7 with digital mux functions.
69 GPIO44 bidirectional General-purpose input/output 44 with OUTPUTXBAR7, eQEP1_A, PMBUSA_SDA and PMBUSA_CTL mux options.
70 VSS power_in Digital ground; connect to board ground.
71 VDD power_in 1.2-V digital logic power pin; all VDD pins must be connected and not used to bias external circuits.
72 VDDIO power_in 3.3-V digital I/O power pin; all VDDIO pins must be connected.
73 GPIO45 bidirectional General-purpose input/output 45 with OUTPUTXBAR8 and PMBUSA_ALERT mux options.
74 GPIO5 bidirectional General-purpose input/output 5 with digital mux functions.
75 GPIO9 bidirectional General-purpose input/output 9 with ePWM5_B, SCIB_TX, OUTPUTXBAR6 and SCIA_RX mux options.
76 GPIO10 bidirectional General-purpose input/output 10 with ePWM6_A, ADCSOCBO, eQEP1_A and SCIB_TX mux options.
77 GPIO34 bidirectional General-purpose input/output 34 with digital mux functions.
78 GPIO15 bidirectional General-purpose input/output 15 with SCIB_RX, I2CB_SCL, OUTPUTXBAR4 and PMBUSA_SCL mux options.
79 GPIO14 bidirectional General-purpose input/output 14 with SCIB_TX, I2CB_SDA, OUTPUTXBAR3 and PMBUSA_SDA mux options.
80 GPIO6 bidirectional General-purpose input/output 6 with SYNCOUT mux option and other digital mux functions.

Key specifications

Parameter Value
Manufacturer TI(德州仪器)
Package LQFP-80(12x12)
Category
Pins 80

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage VDD -0.3 1.5 V with respect to VSS 47
VDDIO supply voltage VDDIO -0.3 4.6 V with respect to VSS 47
VDDA supply voltage VDDA -0.3 4.6 V with respect to VSSA 47
Input voltage VIN -0.3 4.6 V VIN (3.3 V) 47
Output voltage VO -0.3 4.6 V 47
Input clamp current per pin IIK -20 20 mA VIN < VSS/VSSA; VIN > VDDIO/VDDA 47
Input clamp current total for all pins IIKTOTAL -20 20 mA VIN < VSS/VSSA; VIN > VDDIO/VDDA 47
Digital output current per pin IOUT -20 20 mA 47
Operating junction temperature TJ -40 155 °C 47
Storage temperature Tstg -65 150 °C 47
ESD HBM V(ESD) -2000 2000 V HBM, AEC Q100-002, all pins, 80-pin PN 48
ESD CDM all pins V(ESD) -500 500 V CDM, AEC Q100-011, all pins, 80-pin PN 48
ESD CDM corner pins V(ESD) -750 750 V CDM, corner pins 1, 20, 21, 40, 41, 60, 61, 80 on 80-pin PN 48
Device supply voltage VDDIO and VDDA, BOR disabled VDDIO, VDDA 2.8 3.3 3.63 V Internal BOR disabled 48
Device supply voltage VDDIO and VDDA, BOR enabled VDDIO, VDDA 3.3 3.63 V Internal BOR enabled; min is VBOR-VDDIO(MAX) + VBOR-GB 48
Device supply voltage VDD VDD 1.14 1.2 1.32 V 48
Junction temperature TJ -40 140 °C F280015xS, F280015xQ parts 48
Free-air temperature TA -40 125 °C F280015xS, F280015xQ parts 48
Low-level output voltage VOL 0.4 V IOL = IOL MAX 59
Low-level output voltage VOL 0.2 V IOL = 100 µA 59
High-level output source current for all output pins IOH -4 mA 59
Low-level output sink current for all output pins IOL 4 mA 59
High-level output impedance for all output pins ROH 50 65 96 Ω VOH=VDDS-0.4V 59
Low-level output impedance for all output pins ROL 48 60 84 Ω VOL=0.4V 59
High-level input voltage VIH 2 V 59
Low-level input voltage VIL 0.8 V 59
Weak pulldown resistance RPULLDOWN 22.66 31.49 61.55 kΩ 59
Weak pullup resistance RPULLUP 19.89 29.45 53.63 kΩ 59
Internal voltage regulator output VVREG 1.152 1.2 1.248 V 71
VDDIO brown out reset voltage on ramp down VBOR-VDDIO-DOWN 2.81 3 V After XRSn release 71
Supply ramp rate of 3.3V rails SRVDD33 20 100 mV/us VDDIO, VDDA 71
Total nominal VDD capacitance, internal VREG CVDD TOTAL 10 22 uF Internal VREG 71
Frequency, X1/X2 from external crystal or resonator f(XTAL) 10 20 MHz 79
Frequency, X1 from external oscillator f(X1) 10 25 MHz 79
Frequency, device (system) clock f(SYSCLK) 2 120 MHz 80
Hold time for boot-mode pins th(boot-mode) 1.5 ms 74
Pulse duration, XRSn low on warm reset tw(RSL2) 3.2 µs 74
Junction-to-case thermal resistance, top RΘJC 17.7 °C/W PN package 60
Junction-to-board thermal resistance RΘJB 36.5 °C/W PN package 60
Junction-to-free air thermal resistance RΘJA 56.7 °C/W High k PCB, PN package 60
Junction-to-package top Psi JT 0.8 °C/W PN package 60
Junction-to-board Psi JB 36 °C/W PN package 60
VDDIO current, operating mode IDDIO 71.22 mA 125 ℃, VREG enabled, CPU running from RAM, PLL at max SYSCLK 49
VDDA current, operating mode IDDA 2.5 mA 125 ℃, VREG enabled 49

CAD (KiCad official)

  • Symbol: F2800156QPNRQ1
  • Footprint: Package_QFP:LQFP-80_12x12mm_P0.5mm
  • 3D model: LQFP-80(12x12) (KiCad packages3D, STEP)
  • 3D model files: f2800156qpnrq1-etched.step / f2800156qpnrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f2800156qpnrq1.step / f2800156qpnrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TI(德州仪器) datasheet (252 pp, sha256 e5e9c14e326ac962, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF