main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers f0424ntgk8: viewers rendered from the public page · Ray
f0424ntgk8-etched.glb f0424ntgk8: factory component page (tier=mfr) · Ray
f0424ntgk8-etched.step f0424ntgk8: factory component page (tier=mfr) · Ray
f0424ntgk8-hero.glb f0424ntgk8: hero GLB from the etched model (keeps the MPN mark) · Ray
f0424ntgk8-hero.overlay.json f0424ntgk8: hero GLB from the etched model (keeps the MPN mark) · Ray
f0424ntgk8.glb Publish 0.1.0 · Ray
f0424ntgk8.kicad_mod Publish 0.1.0 · Ray
f0424ntgk8.kicad_sym Publish 0.1.0 · Ray
f0424ntgk8.lbr Publish 0.1.0 · Ray
f0424ntgk8.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

F0424NTGK8

RENESAS · RF Amplifiers · DFN-8-EP(2x2)

F0424NTGK8 from RENESAS, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Power supply for the amplifier, which must be bypassed with a capacitor placed as close to the pin as possible; the datasheet gives a VCC pin range of 3.15 V to 5.25 V.
2 RFIN input RF input internally matched to 50 Ω, and an external DC block is required.
3 NC unconnected No connection; the pin can be left unconnected, tied to VCC, or tied to GND, and IDT recommends connecting it to GND.
4 RSET passive Main amplifier current bias setting resistor pin, which must be connected to GND.
5 RDSET passive Distortion amplifier current bias setting resistor pin, which must be connected to GND.
6 STBY input Standby control: logic LOW or unconnected gives normal operation, logic HIGH puts the device in STBY mode, with logic input high threshold VIH of 1.07 V and low threshold VIL of 0.8 V.
7 RFOUT output RF output internally matched to 50 Ω, and an external DC block is required.
8 i.c. passive Internally connected pin that must be connected directly to ground.
9 EPAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer RENESAS
Package DFN-8-EP(2x2)
Category RF & Radio
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VCC 3.15 5.25 V VCC pins 6
Operating Temperature Range (exposed paddle) TEPAD -40 105 °C Exposed paddle temperature 6
RF Frequency Range fRF 600 5000 MHz Operating range 6
VCC to GND VCC -0.3 5.5 V 6
STBY VSTBY -0.3 3.6 V 6
STBY Minus VCC Voltage (voltage difference) VSTBY-VCC 0.3 V 6
RFIN Externally Applied DC Current IRFIN -1 1 mA 6
RSET Pin Maximum DC Current IPIN4 -1 1 mA 6
RDSET Pin Maximum DC Current IPIN5 -1 1 mA 6
RF Input Power (RFOUT) Maximum PMAX_IN 20 dBm Present for 24 Hours 6
Continuous Power Dissipation PDISS 0.6 W 6
Junction Temperature TJMAX 140 °C 6
Storage Temperature Range TSTOR -65 150 °C 6
Lead Temperature 260 °C Soldering, 10s 6
Electrostatic Discharge, HBM 2000 V JEDEC/ESDA JS-001-2012 (Class 2) 6
Electrostatic Discharge, CDM 1000 V JEDEC 22-C101F (Class C3) 6
Junction-to-Ambient Thermal Resistance θJA 93 °C/W 9
Junction-to-Case Thermal Resistance (case = exposed paddle) θJC-BOT 27 °C/W Case is defined as the exposed paddle 9
Logic Input High Threshold (5V supply) VIH 1.07 V 7
Logic Input Low Threshold (5V supply) VIL 0.8 V 7
Logic Current (5V supply) IIH, IIL -10 100 µA Applied STBY voltage = 3.6V 7
Supply Current (5V supply) ICC 70 80 mA 7
Standby Current (5V supply) ICC_STBY 2 3 mA 7
Settling Time (5V supply) tSETTLE 0.25 µs 50% STBY control to within ±0.5dB of final power level 7
RF Input Return Loss (5V supply) RLIN 13 dB 7
RF Output Return Loss (5V supply) RLOUT 12 dB 7
Gain (5V supply) G 16 17.3 dB fRF = 2600MHz 7
Gain Flatness (5V supply) GVAR -0.15 0.15 dB fRF = 700MHz, ±100MHz 7
Gain Flatness (5V supply) GVAR -0.1 0.1 dB fRF = 1900MHz, ±100MHz 7
Gain Flatness (5V supply) GVAR -0.19 0.19 dB fRF = 4900MHz, ±100MHz 7
Gain Variation over Temperature (5V supply) GTEMP -0.2 0.2 dB TEPAD = -40°C to +105°C 7
Noise Figure (5V supply) NF 2.3 2.7 dB fRF = 2600MHz 7
Noise Figure Variation over Temperature (5V supply) NFTEMP -0.4 0.4 dB TEPAD = -40°C to +105°C 7
Output Third-Order Intercept Point (5V supply) OIP3 35 40 dBm fRF = 2600MHz, 5MHz tone separation 7
Output Third-Order Intercept Point Variation over Temperature (5V supply) OIP3VAR -1.2 0.26 dB fRF = 2600MHz, 5MHz tone separation, TEPAD = -40°C to +105°C 7
Output P1dB Compression (5V supply) OP1dB 20 21 dBm fRF = 2600MHz 8
Output P1dB Compression (5V supply) OP1dB 20 dBm fRF = 3500MHz 8
Output P1dB Compression (5V supply) OP1dB 18 dBm fRF = 4900MHz 8
Reverse Isolation (5V supply) REVISO 24 dB 8
Logic Input High Threshold (3.3V supply) VIH 1.07 V 8
Logic Input Low Threshold (3.3V supply) VIL 0.8 V 8
Logic Current (3.3V supply) IIH, IIL -10 100 µA Applied STBY voltage = 3.6V 8
Settling Time (3.3V supply) tSETTLE 0.25 µs 50% STBY control to within ±0.5dB of final power level 8
RF Input Return Loss (3.3V supply) RLIN 13 dB 8
RF Output Return Loss (3.3V supply) RLOUT 12 dB 8
Gain Flatness (3.3V supply) GVAR -0.15 0.15 dB fRF = 700MHz, ±100MHz 8
Gain Flatness (3.3V supply) GVAR -0.1 0.1 dB fRF = 1900MHz, ±100MHz 8
Gain Flatness (3.3V supply) GVAR -0.2 0.2 dB fRF = 3500MHz, ± 100MHz 8
Gain Flatness (3.3V supply) GVAR -0.17 0.17 dB fRF = 4900MHz, ± 100MHz 8
Gain Variation over Temperature (3.3V supply) GTEMP -0.2 0.2 dB TEPAD = -40°C to +105°C 8
Noise Figure Variation over Temperature (3.3V supply) NFTEMP -0.4 0.5 dB TEPAD = -40°C to +105°C 9
Reverse Isolation (3.3V supply) REVISO 24 dB 9
Supply Current (3.3V supply) ICC 70 mA 8
Standby Current (3.3V supply) ICC_STBY 2 mA 8
Pull-down Resistor on STBY pin (5V supply) RSTBY 50 kΩ 7

CAD (KiCad official)

  • Symbol: F0424NTGK8
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: f0424ntgk8-etched.step / f0424ntgk8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); f0424ntgk8.step / f0424ntgk8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (24 pp, sha256 f9af2136073c4acf, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF