component
ETA4056E8A
Public Made by Adomby adom
etasolution Battery Management, ESOP8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/eta4056e8a
1320b26
ETA4056E8A
etasolution · Battery Management · ESOP8
ETA4056E8A from etasolution, in a ESOP8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NTC | input | Battery temperature monitoring input pin for setting valid temperature operating range for charging and discharging. |
| 2 | ISET | bidirectional | Program and monitor charge current via 1% resistor to GND; IC maintains 1V in constant-current mode; disconnect resistor to disable charger. |
| 3 | GND | power_in | Ground reference. |
| 4 | VIN | power_in | Positive input supply; requires bypass with at least 4.7μF capacitor; 16V input standoff voltage. |
| 5 | BAT | output | Charge current output; provides current to battery and regulates float voltage to 4.2V with ±1% accuracy. |
| 6 | STDBY | output | Open-drain output for charge finished flag; low when charging complete, high-impedance during charging. |
| 7 | STAT | output | Open-drain output for in-charging flag; low during charging, high-impedance upon charge cycle completion. |
| 8 | EN | input | Enable/disable charger; drive high or floating to enable, low to disable. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | ESOP8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
ETA4056E8A - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: ESOP8 (KiCad packages3D, STEP)
- 3D model files:
eta4056e8a-etched.step/eta4056e8a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eta4056e8a.step/eta4056e8a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: etasolution datasheet (12 pp, sha256
cf37d241628716ca, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ETA4056E8A
**etasolution** · Battery Management · ESOP8
ETA4056E8A from etasolution, in a ESOP8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NTC | input | Battery temperature monitoring input pin for setting valid temperature operating range for charging and discharging. |
| 2 | ISET | bidirectional | Program and monitor charge current via 1% resistor to GND; IC maintains 1V in constant-current mode; disconnect resistor to disable charger. |
| 3 | GND | power_in | Ground reference. |
| 4 | VIN | power_in | Positive input supply; requires bypass with at least 4.7μF capacitor; 16V input standoff voltage. |
| 5 | BAT | output | Charge current output; provides current to battery and regulates float voltage to 4.2V with ±1% accuracy. |
| 6 | STDBY | output | Open-drain output for charge finished flag; low when charging complete, high-impedance during charging. |
| 7 | STAT | output | Open-drain output for in-charging flag; low during charging, high-impedance upon charge cycle completion. |
| 8 | EN | input | Enable/disable charger; drive high or floating to enable, low to disable. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | etasolution |
| Package | ESOP8 |
| Category | Power Management (PMIC) |
| Pins | 9 |
## CAD (KiCad official)
- Symbol: `ETA4056E8A`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: ESOP8 (KiCad packages3D, STEP)
- 3D model files: `eta4056e8a-etched.step` / `eta4056e8a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `eta4056e8a.step` / `eta4056e8a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [etasolution datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590905150846685184) (12 pp, sha256 `cf37d241628716ca`, retrieved 2026-09-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/eta4056e8a-datasheet.pdf)