main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs eta4056e8a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers eta4056e8a: viewers · Ray
eta4056e8a-etched.fit.json eta4056e8a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eta4056e8a-etched.glb eta4056e8a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eta4056e8a-etched.step eta4056e8a: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
eta4056e8a.glb Publish 0.1.0 · Ray
eta4056e8a.kicad_mod Publish 0.1.0 · Ray
eta4056e8a.kicad_sym Publish 0.1.0 · Ray
eta4056e8a.lbr Publish 0.1.0 · Ray
eta4056e8a.step Publish 0.1.0 · Ray
package.json eta4056e8a: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json eta4056e8a: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/eta4056e8a · Ray

ETA4056E8A

etasolution · Battery Management · ESOP8

ETA4056E8A from etasolution, in a ESOP8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NTC input Battery temperature monitoring input pin for setting valid temperature operating range for charging and discharging.
2 ISET bidirectional Program and monitor charge current via 1% resistor to GND; IC maintains 1V in constant-current mode; disconnect resistor to disable charger.
3 GND power_in Ground reference.
4 VIN power_in Positive input supply; requires bypass with at least 4.7μF capacitor; 16V input standoff voltage.
5 BAT output Charge current output; provides current to battery and regulates float voltage to 4.2V with ±1% accuracy.
6 STDBY output Open-drain output for charge finished flag; low when charging complete, high-impedance during charging.
7 STAT output Open-drain output for in-charging flag; low during charging, high-impedance upon charge cycle completion.
8 EN input Enable/disable charger; drive high or floating to enable, low to disable.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer etasolution
Package ESOP8
Category Power Management (PMIC)
Pins 9

CAD (KiCad official)

  • Symbol: ETA4056E8A
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: ESOP8 (KiCad packages3D, STEP)
  • 3D model files: eta4056e8a-etched.step / eta4056e8a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); eta4056e8a.step / eta4056e8a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: etasolution datasheet (12 pp, sha256 cf37d241628716ca, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF