ETA3512FSG

{
 "schema": "adom.pads/1",
 "slug": "eta3512fsg",
 "footprint": "SOT-563",
 "generated_from": {
  "footprint": "SOT-563@sha256:787def5a43a0ae8e",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -0.7125,
   -0.5
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-563@sha256:787def5a43a0ae8e"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.7125,
    -0.5
   ],
   "rot": 0.0,
   "size": [
    0.675,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "FB",
   "type": "input",
   "description": "Feedback input. Connect an external resistor divider from VOUT to FB and GND to set the output voltage per VOUT = 0.6V x (1 + R1/R2). Internal reference VREF = 0.6V typical (0.594-0.606V at 25 C).",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-563.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.7125,
    0.0
   ],
   "rot": 0.0,
   "size": [
    0.675,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground return. Reference for input, output, and control signals.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-563.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.7125,
    0.5
   ],
   "rot": 0.0,
   "size": [
    0.675,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "IN",
   "type": "power_in",
   "description": "Supply voltage input, 2.5V to 5.5V (7.5V abs max). Bypass with a 10uF ceramic capacitor to GND placed as close as possible to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-563.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.7125,
    0.5
   ],
   "rot": 0.0,
   "size": [
    0.675,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "SW",
   "type": "power_out",
   "description": "Switching node, drain connection of the internal high-side and low-side power MOSFETs. Connect a 1uH inductor between SW and the regulator output. High-side Rds(on) = 100 mOhm typ, low-side Rds(on) = 60 mOhm typ; high-side current limit 4.5A typ.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-563.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.7125,
    0.0
   ],
   "rot": 0.0,
   "size": [
    0.675,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "EN",
   "type": "input",
   "description": "Enable input. Drive high (>=1.2V rising) to enable the converter, low (<=0.4V falling) to disable/shutdown. EN input current ~1uA at VEN=2V. Do not float.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-563.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.7125,
    -0.5
   ],
   "rot": 0.0,
   "size": [
    0.675,
    0.35
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "PG",
   "type": "output",
   "description": "Power Good open-drain output. High impedance when the output voltage is within regulation (approximately 90% to 120% of the FB threshold, 5% hysteresis); pulled low otherwise. Requires an external pull-up resistor (e.g. 100k to VIN or logic rail).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-563.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}