main
History Download
Ray Publish 0.2.0 51763cc

ESP32-DevKitC

Espressif Systems · development board · ESP32-WROOM-32E · orderable as ESP32-DEVKITC-32D

This page carries the board as a part, so a carrier board or a breakout molecule can place it: the header pinout as a symbol, the header pattern as a footprint, and a 3D model of the board standing on its headers.

Footprint

J2 (19 pins) and J3 (19 pins) at 2.54 mm, from Espressif's dimension drawing. The footprint origin is the centre of the header pattern; F.Fab draws the board (27.94 x 48.26 mm) and the module. The module's antenna runs 6.04 mm past the board edge; the footprint keeps copper out from under that overhang.

Pinout

As printed in Espressif's user guide (current revision). Pin 1 of each header is at the module end.

J2

No. Name Function
1 3V3 3.3 V power supply
2 EN CHIP_PU, Reset
3 VP GPIO36, ADC1_CH0, S_VP
4 VN GPIO39, ADC1_CH3, S_VN
5 IO34 GPIO34, ADC1_CH6, VDET_1
6 IO35 GPIO35, ADC1_CH7, VDET_2
7 IO32 GPIO32, ADC1_CH4, TOUCH_CH9, XTAL_32K_P
8 IO33 GPIO33, ADC1_CH5, TOUCH_CH8, XTAL_32K_N
9 IO25 GPIO25, ADC2_CH8, DAC_1
10 IO26 GPIO26, ADC2_CH9, DAC_2
11 IO27 GPIO27, ADC2_CH7, TOUCH_CH7
12 IO14 GPIO14, ADC2_CH6, TOUCH_CH6, MTMS
13 IO12 GPIO12, ADC2_CH5, TOUCH_CH5, MTDI
14 GND Ground
15 IO13 GPIO13, ADC2_CH4, TOUCH_CH4, MTCK
16 D2 GPIO9, D2
17 D3 GPIO10, D3
18 CMD GPIO11, CMD
19 5V 5 V power supply

J3

No. Name Function
1 GND Ground
2 IO23 GPIO23
3 IO22 GPIO22
4 TX GPIO1, U0TXD
5 RX GPIO3, U0RXD
6 IO21 GPIO21
7 GND Ground
8 IO19 GPIO19
9 IO18 GPIO18
10 IO5 GPIO5
11 IO17 GPIO17
12 IO16 GPIO16
13 IO4 GPIO4, ADC2_CH0, TOUCH_CH0
14 IO0 GPIO0, ADC2_CH1, TOUCH_CH1, Boot
15 IO2 GPIO2, ADC2_CH2, TOUCH_CH2
16 IO15 GPIO15, ADC2_CH3, TOUCH_CH3, MTDO
17 D1 GPIO8, D1
18 D0 GPIO7, D0
19 CLK GPIO6, CLK

3D model

Rebuilt from Espressif's own manufacturing data: the PCB layout plots (esp32_devkitc_v4_pcb_layout.pdf) give every part, its pads (by the plot's own pad designators) and the silkscreen as Espressif drew them; the board edge comes from the plot itself (Espressif's dimension DXF for this kit is silkscreen artwork with no board outline). The plot draws no holes for the through-hole pads, so they are drilled 1.0 mm, the KiCad pin-header drill (a builder choice, stated here). The module is Espressif's ESP32-WROOM-32E model (espressif/kicad-libraries) with its name etched; every other part is a KiCad library model fitted to its pads in the plot (worst fit 0.07 mm), each listed below with where its model came from. J1: Micro-B jack with no maker datasheet, generated from the USB Micro-B receptacle interface and the jack height in Espressif's BOM (S3-DevKitC-1 reference design, USB_5P_MICRO_F_ML), on this board's own land. SW1/SW2: Espressif publishes no part number for DevKitC V4's buttons; model generated on Espressif's land, body size and colour from Espressif's product photo (height 2.5 mm overall is not in any Espressif source: a builder choice). The headers are mounted below the board, pins down, as the kit ships. Solder mask black and silkscreen white, from Espressif's user-guide photo. U3 is not populated on the shipped board (Espressif's ESP32-WROVER land, which the board shares with the ESP32-WROOM land D2 (schematic esp32_devkitc_v4_sch.pdf); the WROOM-32E kit populates D2 only); footprint shown bare on purpose. Two-pad parts are fitted by their land: where a diode and an LED share a land, the land cannot tell which, and the passive values are not read from the schematic.

Documents

Modules: schematic ESP32_DevKitc_V4 (image): two module footprints, D2 "ESP-WROOM-32" and U3 "ESP32_WROVER(NC)"; the board ships with either a WROOM-32 family or a WROVER family module.

Schematic (Espressif)

Loads when you scroll to it. Unloads after 5 minutes in the background.

Dimensions (Espressif)

Loads when you scroll to it. Unloads after 5 minutes in the background.

Parts on the board

Ref Part Page 3D model
C1 (none) KiCad library model, fitted to its plotted pads
C3 (none) KiCad library model, fitted to its plotted pads
C9 (none) KiCad library model, fitted to its plotted pads
C14 (none) KiCad library model, fitted to its plotted pads
C15 (none) KiCad library model, fitted to its plotted pads
C19 (none) KiCad library model, fitted to its plotted pads
C20 (none) KiCad library model, fitted to its plotted pads
C21 (none) KiCad library model, fitted to its plotted pads
C22 (none) KiCad library model, fitted to its plotted pads
D1 (none) KiCad library model, fitted to its plotted pads
D2 adom/esp32-wroom-32e-n4 Espressif's ESP32-WROOM-32E model (espressif/kicad-libraries), name etched
D3 (none) KiCad library model, fitted to its plotted pads
D4 (none) KiCad library model, fitted to its plotted pads
D5 (none) KiCad library model, fitted to its plotted pads
D6 (none) KiCad library model, fitted to its plotted pads
J1 (none) generated: USB Micro-B receptacle interface + Espressif BOM jack height (S3-DevKitC-1 reference design item 16, USB_5P_MICRO_F_ML), on this board's own land
J2 (none) KiCad library model, fitted to its plotted pads
J3 (none) KiCad library model, fitted to its plotted pads
Q1 (none) KiCad library model, fitted to its plotted pads
Q2 (none) KiCad library model, fitted to its plotted pads
R2 (none) KiCad library model, fitted to its plotted pads
R11 (none) KiCad library model, fitted to its plotted pads
R17 (none) KiCad library model, fitted to its plotted pads
R18 (none) KiCad library model, fitted to its plotted pads
R21 (none) KiCad library model, fitted to its plotted pads
R22 (none) KiCad library model, fitted to its plotted pads
R23 (none) KiCad library model, fitted to its plotted pads
R24 (none) KiCad library model, fitted to its plotted pads
R25 (none) KiCad library model, fitted to its plotted pads
R26 (none) KiCad library model, fitted to its plotted pads
SW1 (none) Espressif publishes no part number for DevKitC V4's buttons; model generated on Espressif's land, body size and colour from Espressif's product photo (height 2.5 mm overall is not in any Espressif source: a builder choice)
SW2 (none) Espressif publishes no part number for DevKitC V4's buttons; model generated on Espressif's land, body size and colour from Espressif's product photo (height 2.5 mm overall is not in any Espressif source: a builder choice)
U1 (none) KiCad library model, fitted to its plotted pads
U2 (none) KiCad library model, fitted to its plotted pads
U3 (none) not populated (DNP) (U3 is not populated on the shipped board (Espressif's ESP32-WROVER land, which the board shares with the ESP32-WROOM land D2 (schematic esp32_devkitc_v4_sch.pdf); the WROOM-32E kit populates D2 only); footprint shown bare on purpose.)