ESP32-DevKitC
Espressif Systems · development board · ESP32-WROOM-32E · orderable as ESP32-DEVKITC-32D
This page carries the board as a part, so a carrier board or a breakout molecule can place it: the header pinout as a symbol, the header pattern as a footprint, and a 3D model of the board standing on its headers.
Footprint
J2 (19 pins) and J3 (19 pins) at 2.54 mm, from Espressif's dimension drawing. The footprint origin is the centre of the header pattern; F.Fab draws the board (27.94 x 48.26 mm) and the module. The module's antenna runs 6.04 mm past the board edge; the footprint keeps copper out from under that overhang.
Pinout
As printed in Espressif's user guide (current revision). Pin 1 of each header is at the module end.
J2
| No. | Name | Function |
|---|---|---|
| 1 | 3V3 | 3.3 V power supply |
| 2 | EN | CHIP_PU, Reset |
| 3 | VP | GPIO36, ADC1_CH0, S_VP |
| 4 | VN | GPIO39, ADC1_CH3, S_VN |
| 5 | IO34 | GPIO34, ADC1_CH6, VDET_1 |
| 6 | IO35 | GPIO35, ADC1_CH7, VDET_2 |
| 7 | IO32 | GPIO32, ADC1_CH4, TOUCH_CH9, XTAL_32K_P |
| 8 | IO33 | GPIO33, ADC1_CH5, TOUCH_CH8, XTAL_32K_N |
| 9 | IO25 | GPIO25, ADC2_CH8, DAC_1 |
| 10 | IO26 | GPIO26, ADC2_CH9, DAC_2 |
| 11 | IO27 | GPIO27, ADC2_CH7, TOUCH_CH7 |
| 12 | IO14 | GPIO14, ADC2_CH6, TOUCH_CH6, MTMS |
| 13 | IO12 | GPIO12, ADC2_CH5, TOUCH_CH5, MTDI |
| 14 | GND | Ground |
| 15 | IO13 | GPIO13, ADC2_CH4, TOUCH_CH4, MTCK |
| 16 | D2 | GPIO9, D2 |
| 17 | D3 | GPIO10, D3 |
| 18 | CMD | GPIO11, CMD |
| 19 | 5V | 5 V power supply |
J3
| No. | Name | Function |
|---|---|---|
| 1 | GND | Ground |
| 2 | IO23 | GPIO23 |
| 3 | IO22 | GPIO22 |
| 4 | TX | GPIO1, U0TXD |
| 5 | RX | GPIO3, U0RXD |
| 6 | IO21 | GPIO21 |
| 7 | GND | Ground |
| 8 | IO19 | GPIO19 |
| 9 | IO18 | GPIO18 |
| 10 | IO5 | GPIO5 |
| 11 | IO17 | GPIO17 |
| 12 | IO16 | GPIO16 |
| 13 | IO4 | GPIO4, ADC2_CH0, TOUCH_CH0 |
| 14 | IO0 | GPIO0, ADC2_CH1, TOUCH_CH1, Boot |
| 15 | IO2 | GPIO2, ADC2_CH2, TOUCH_CH2 |
| 16 | IO15 | GPIO15, ADC2_CH3, TOUCH_CH3, MTDO |
| 17 | D1 | GPIO8, D1 |
| 18 | D0 | GPIO7, D0 |
| 19 | CLK | GPIO6, CLK |
3D model
Rebuilt from Espressif's own manufacturing data: the PCB layout plots (esp32_devkitc_v4_pcb_layout.pdf) give every part, its pads (by the plot's own pad designators) and the silkscreen as Espressif drew them; the board edge comes from the plot itself (Espressif's dimension DXF for this kit is silkscreen artwork with no board outline). The plot draws no holes for the through-hole pads, so they are drilled 1.0 mm, the KiCad pin-header drill (a builder choice, stated here). The module is Espressif's ESP32-WROOM-32E model (espressif/kicad-libraries) with its name etched; every other part is a KiCad library model fitted to its pads in the plot (worst fit 0.07 mm), each listed below with where its model came from. J1: Micro-B jack with no maker datasheet, generated from the USB Micro-B receptacle interface and the jack height in Espressif's BOM (S3-DevKitC-1 reference design, USB_5P_MICRO_F_ML), on this board's own land. SW1/SW2: Espressif publishes no part number for DevKitC V4's buttons; model generated on Espressif's land, body size and colour from Espressif's product photo (height 2.5 mm overall is not in any Espressif source: a builder choice). The headers are mounted below the board, pins down, as the kit ships. Solder mask black and silkscreen white, from Espressif's user-guide photo. U3 is not populated on the shipped board (Espressif's ESP32-WROVER land, which the board shares with the ESP32-WROOM land D2 (schematic esp32_devkitc_v4_sch.pdf); the WROOM-32E kit populates D2 only); footprint shown bare on purpose. Two-pad parts are fitted by their land: where a diode and an LED share a land, the land cannot tell which, and the passive values are not read from the schematic.
Documents
- User guide (Espressif, web)
- Module datasheet (ESP32-WROOM-32E, v2.1): docs/esp32-devkitc-module-esp32-wroom-32e-datasheet.pdf, from Espressif
- Module datasheet (ESP32-WROVER-E, v2.4): docs/esp32-devkitc-module-esp32-wrover-e-datasheet.pdf, from Espressif
- Schematic: docs/esp32-devkitc-schematic.pdf, from Espressif
- Dimensions: docs/esp32-devkitc-dimensions.pdf, from Espressif
Modules: schematic ESP32_DevKitc_V4 (image): two module footprints, D2 "ESP-WROOM-32" and U3 "ESP32_WROVER(NC)"; the board ships with either a WROOM-32 family or a WROVER family module.
Schematic (Espressif)
Dimensions (Espressif)
Parts on the board
| Ref | Part | Page | 3D model |
|---|---|---|---|
| C1 | (none) | KiCad library model, fitted to its plotted pads | |
| C3 | (none) | KiCad library model, fitted to its plotted pads | |
| C9 | (none) | KiCad library model, fitted to its plotted pads | |
| C14 | (none) | KiCad library model, fitted to its plotted pads | |
| C15 | (none) | KiCad library model, fitted to its plotted pads | |
| C19 | (none) | KiCad library model, fitted to its plotted pads | |
| C20 | (none) | KiCad library model, fitted to its plotted pads | |
| C21 | (none) | KiCad library model, fitted to its plotted pads | |
| C22 | (none) | KiCad library model, fitted to its plotted pads | |
| D1 | (none) | KiCad library model, fitted to its plotted pads | |
| D2 | adom/esp32-wroom-32e-n4 | Espressif's ESP32-WROOM-32E model (espressif/kicad-libraries), name etched | |
| D3 | (none) | KiCad library model, fitted to its plotted pads | |
| D4 | (none) | KiCad library model, fitted to its plotted pads | |
| D5 | (none) | KiCad library model, fitted to its plotted pads | |
| D6 | (none) | KiCad library model, fitted to its plotted pads | |
| J1 | (none) | generated: USB Micro-B receptacle interface + Espressif BOM jack height (S3-DevKitC-1 reference design item 16, USB_5P_MICRO_F_ML), on this board's own land | |
| J2 | (none) | KiCad library model, fitted to its plotted pads | |
| J3 | (none) | KiCad library model, fitted to its plotted pads | |
| Q1 | (none) | KiCad library model, fitted to its plotted pads | |
| Q2 | (none) | KiCad library model, fitted to its plotted pads | |
| R2 | (none) | KiCad library model, fitted to its plotted pads | |
| R11 | (none) | KiCad library model, fitted to its plotted pads | |
| R17 | (none) | KiCad library model, fitted to its plotted pads | |
| R18 | (none) | KiCad library model, fitted to its plotted pads | |
| R21 | (none) | KiCad library model, fitted to its plotted pads | |
| R22 | (none) | KiCad library model, fitted to its plotted pads | |
| R23 | (none) | KiCad library model, fitted to its plotted pads | |
| R24 | (none) | KiCad library model, fitted to its plotted pads | |
| R25 | (none) | KiCad library model, fitted to its plotted pads | |
| R26 | (none) | KiCad library model, fitted to its plotted pads | |
| SW1 | (none) | Espressif publishes no part number for DevKitC V4's buttons; model generated on Espressif's land, body size and colour from Espressif's product photo (height 2.5 mm overall is not in any Espressif source: a builder choice) | |
| SW2 | (none) | Espressif publishes no part number for DevKitC V4's buttons; model generated on Espressif's land, body size and colour from Espressif's product photo (height 2.5 mm overall is not in any Espressif source: a builder choice) | |
| U1 | (none) | KiCad library model, fitted to its plotted pads | |
| U2 | (none) | KiCad library model, fitted to its plotted pads | |
| U3 | (none) | not populated (DNP) (U3 is not populated on the shipped board (Espressif's ESP32-WROVER land, which the board shares with the ESP32-WROOM land D2 (schematic esp32_devkitc_v4_sch.pdf); the WROOM-32E kit populates D2 only); footprint shown bare on purpose.) |