main
Ray
Publish 0.1.0
246ad63
ESP32-C61HR8
Espressif Systems · RF and Wireless · QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm
ESP32-C61HR8 from Espressif Systems, in a QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT_2G | bidirectional | RF input/output pin for the 2.4 GHz antenna connection. |
| 2 | VDDA3 | power_in | Input supply for the analog power domain. |
| 3 | VDDA4 | power_in | Input supply for the analog power domain. |
| 4 | CHIP_PU | input | Chip enable: high powers up the chip and low powers it down, and it must not be left floating. |
| 5 | VDDPST1 | power_in | Input supply for the HP digital and part of the LP digital power domains, including the LP IO pins. |
| 6 | XTAL_32K_P | bidirectional | Positive side of the differential 32 kHz clock connection to the external crystal, also usable as GPIO0 and LP_GPIO0. |
| 7 | XTAL_32K_N | bidirectional | Negative side of the differential 32 kHz clock connection to the external crystal, also usable as GPIO1 and ADC1_CH0. |
| 8 | GPIO2 | bidirectional | General-purpose IO with LP_GPIO2 and FSPIQ SPI2 functions, with a default drive strength of 20 mA. |
| 9 | MTMS | bidirectional | JTAG test mode select, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH1. |
| 10 | MTDI | bidirectional | JTAG test data input, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH2. |
| 11 | MTCK | bidirectional | JTAG test clock, also usable as GPIO5 and ADC1_CH3. |
| 12 | MTDO | tri_state | JTAG test data output with high-impedance (T) type, also usable as GPIO6. |
| 13 | SDIO_CMD | bidirectional | SDIO slave command line, powered from VDDPST2 and also usable as GPIO25. |
| 14 | SDIO_CLK | input | SDIO slave clock input, powered from VDDPST2 and also usable as GPIO26. |
| 15 | SDIO_DATA0 | bidirectional | SDIO slave data line 0, powered from VDDPST2 and also usable as GPIO27. |
| 16 | SDIO_DATA1 | bidirectional | SDIO slave data line 1, powered from VDDPST2 and also usable as GPIO28. |
| 17 | SDIO_DATA2 | bidirectional | SDIO slave data line 2, powered from VDDPST2 and also usable as GPIO22. |
| 18 | SDIO_DATA3 | bidirectional | SDIO slave data line 3, powered from VDDPST2 and also usable as GPIO23. |
| 19 | SPICS1 | bidirectional | SPI chip select 1 for the off-package PSRAM interface, also usable as GPIO14; it is not NC on HR8 because the variant has in-package PSRAM. |
| 20 | SPICS0 | bidirectional | SPI chip select 0 for flash access, also usable as GPIO15; it is powered from VDD_SPI or VDDPST2. |
| 21 | VDDPST2 | power_in | Input supply for the HP digital power domain that powers the HP IO pins. |
| 22 | SPIQ | bidirectional | SPI data line (MISO / SIO1) to the in-package flash or PSRAM, also usable as GPIO16. |
| 23 | SPIWP | bidirectional | SPI write protect (SIO2) to the in-package flash or PSRAM, also usable as GPIO17. |
| 24 | VDD_SPI | power_out | Output supplied from VDDPST2 that powers the in-package flash or PSRAM. |
| 25 | SPIHD | bidirectional | SPI hold (SIO3) to the in-package flash or PSRAM, also usable as GPIO19. |
| 26 | SPICLK | output | SPI clock output to the in-package flash or PSRAM, also usable as GPIO20. |
| 27 | SPID | bidirectional | SPI data line (MOSI / SIO0) to the in-package flash or PSRAM, also usable as GPIO21. |
| 28 | USB_D- | bidirectional | USB data negative for the USB Serial/JTAG controller, also usable as GPIO12, with a default drive strength of 40 mA. |
| 29 | USB_D+ | bidirectional | USB data positive for the USB Serial/JTAG controller, also usable as GPIO13, with a default drive strength of 40 mA. |
| 30 | GPIO24 | bidirectional | General-purpose IO powered from VDDPST2. |
| 31 | GPIO8 | bidirectional | Strapping pin for chip boot mode and ROM message printing, also usable as FSPICS0 and as the ZCD0 analog reference pad. |
| 32 | GPIO9 | bidirectional | Strapping pin for chip boot mode, pulled up by default, also usable as the ZCD1 analog test pad. |
| 33 | U0RXD | bidirectional | UART0 receive data, also routable to GPIO10 through IO MUX. |
| 34 | U0TXD | bidirectional | UART0 transmit data, also routable to GPIO11 through IO MUX. |
| 35 | GPIO29 | bidirectional | General-purpose IO powered from VDDPST2. |
| 36 | GPIO7 | bidirectional | Strapping pin for the JTAG signal source, also usable as FSPID SPI2 data input. |
| 37 | VDDA1 | power_in | Input supply for the analog power domain. |
| 38 | XTAL_N | passive | Negative side of the external crystal clock connection to the chip's crystal. |
| 39 | XTAL_P | passive | Positive side of the external crystal clock connection to the chip's crystal. |
| 40 | VDDA2 | power_in | Input supply for the analog power domain. |
| 41 | GND | power_in | External ground connection, serving as the exposed ground pad. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm |
| Category | RF and Wireless |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage on power pins (allowed input voltage) | -0.3 | 3.6 | V | 56 | |||
| Cumulative IO output current | Ioutput | 1500 | mA | 56 | |||
| Storage temperature | TSTORE | -40 | 150 | °C | 56 | ||
| Recommended input voltage | VDDA1, VDDA2, VDDA3P3 | 3 | 3.3 | 3.6 | V | 56 | |
| Recommended input voltage (as input) | VDD_SPI | 1.8 | 3.3 | 3.6 | V | 56 | |
| Cumulative input current | IVDD | 0.5 | A | 56 | |||
| Time reserved for power rails to stabilize before CHIP_PU is pulled high | tST BL | 50 | µs | 25 | |||
| Time reserved for CHIP_PU to stay below VIL_nRST to reset the chip | tRST | 50 | µs | 25 | |||
| VDD_SPI internal resistance RSPI | RSPI | 3 | Ω | VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM | 57 | ||
| Differential nonlinearity (DNL) | DNL | -5 | 5 | LSB | 57 | ||
| Integral nonlinearity (INL) | INL | -5 | 5 | LSB | 57 | ||
| Sampling rate | 2000 | kSPS | 57 | ||||
| ADC total error | -10 | 10 | mV | ATTEN0, effective measurement range of 0 ~ 1000 | 57 | ||
| ADC total error | -12 | 12 | mV | ATTEN2, effective measurement range of 0 ~ 1900 | 57 | ||
| ADC total error | -15 | 15 | mV | ATTEN3, effective measurement range of 0 ~ 3300 | 57 | ||
| TX EVM limit | -24.8 | -10 | dB | 802.11b, 1 Mbps, DSSS | 61 | ||
| TX EVM limit | -26 | -5 | dB | 802.11g, 6 Mbps, OFDM | 62 | ||
| TX EVM limit | -29 | -25 | dB | 802.11g, 54 Mbps, OFDM | 62 | ||
| TX EVM limit | -24.5 | -5 | dB | 802.11n, HT20, MCS0 | 62 | ||
| TX EVM limit | -31.5 | -27 | dB | 802.11n, HT20, MCS7 | 62 | ||
| TX EVM limit | -26.8 | -5 | dB | 802.11n, HT40, MCS0 | 62 | ||
| TX EVM limit | -30.5 | -27 | dB | 802.11n, HT40, MCS7 | 62 |
CAD (KiCad official)
- Symbol:
ESP32-C61HR8 - Footprint:
PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm - 3D model: QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm, generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
esp32-c61hr8-etched.step/esp32-c61hr8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c61hr8.step/esp32-c61hr8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (73 pp, sha256
03027bec333fe7c0, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ESP32-C61HR8
**Espressif Systems** · RF and Wireless · QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm
ESP32-C61HR8 from Espressif Systems, in a QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT_2G | bidirectional | RF input/output pin for the 2.4 GHz antenna connection. |
| 2 | VDDA3 | power_in | Input supply for the analog power domain. |
| 3 | VDDA4 | power_in | Input supply for the analog power domain. |
| 4 | CHIP_PU | input | Chip enable: high powers up the chip and low powers it down, and it must not be left floating. |
| 5 | VDDPST1 | power_in | Input supply for the HP digital and part of the LP digital power domains, including the LP IO pins. |
| 6 | XTAL_32K_P | bidirectional | Positive side of the differential 32 kHz clock connection to the external crystal, also usable as GPIO0 and LP_GPIO0. |
| 7 | XTAL_32K_N | bidirectional | Negative side of the differential 32 kHz clock connection to the external crystal, also usable as GPIO1 and ADC1_CH0. |
| 8 | GPIO2 | bidirectional | General-purpose IO with LP_GPIO2 and FSPIQ SPI2 functions, with a default drive strength of 20 mA. |
| 9 | MTMS | bidirectional | JTAG test mode select, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH1. |
| 10 | MTDI | bidirectional | JTAG test data input, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH2. |
| 11 | MTCK | bidirectional | JTAG test clock, also usable as GPIO5 and ADC1_CH3. |
| 12 | MTDO | tri_state | JTAG test data output with high-impedance (T) type, also usable as GPIO6. |
| 13 | SDIO_CMD | bidirectional | SDIO slave command line, powered from VDDPST2 and also usable as GPIO25. |
| 14 | SDIO_CLK | input | SDIO slave clock input, powered from VDDPST2 and also usable as GPIO26. |
| 15 | SDIO_DATA0 | bidirectional | SDIO slave data line 0, powered from VDDPST2 and also usable as GPIO27. |
| 16 | SDIO_DATA1 | bidirectional | SDIO slave data line 1, powered from VDDPST2 and also usable as GPIO28. |
| 17 | SDIO_DATA2 | bidirectional | SDIO slave data line 2, powered from VDDPST2 and also usable as GPIO22. |
| 18 | SDIO_DATA3 | bidirectional | SDIO slave data line 3, powered from VDDPST2 and also usable as GPIO23. |
| 19 | SPICS1 | bidirectional | SPI chip select 1 for the off-package PSRAM interface, also usable as GPIO14; it is not NC on HR8 because the variant has in-package PSRAM. |
| 20 | SPICS0 | bidirectional | SPI chip select 0 for flash access, also usable as GPIO15; it is powered from VDD_SPI or VDDPST2. |
| 21 | VDDPST2 | power_in | Input supply for the HP digital power domain that powers the HP IO pins. |
| 22 | SPIQ | bidirectional | SPI data line (MISO / SIO1) to the in-package flash or PSRAM, also usable as GPIO16. |
| 23 | SPIWP | bidirectional | SPI write protect (SIO2) to the in-package flash or PSRAM, also usable as GPIO17. |
| 24 | VDD_SPI | power_out | Output supplied from VDDPST2 that powers the in-package flash or PSRAM. |
| 25 | SPIHD | bidirectional | SPI hold (SIO3) to the in-package flash or PSRAM, also usable as GPIO19. |
| 26 | SPICLK | output | SPI clock output to the in-package flash or PSRAM, also usable as GPIO20. |
| 27 | SPID | bidirectional | SPI data line (MOSI / SIO0) to the in-package flash or PSRAM, also usable as GPIO21. |
| 28 | USB_D- | bidirectional | USB data negative for the USB Serial/JTAG controller, also usable as GPIO12, with a default drive strength of 40 mA. |
| 29 | USB_D+ | bidirectional | USB data positive for the USB Serial/JTAG controller, also usable as GPIO13, with a default drive strength of 40 mA. |
| 30 | GPIO24 | bidirectional | General-purpose IO powered from VDDPST2. |
| 31 | GPIO8 | bidirectional | Strapping pin for chip boot mode and ROM message printing, also usable as FSPICS0 and as the ZCD0 analog reference pad. |
| 32 | GPIO9 | bidirectional | Strapping pin for chip boot mode, pulled up by default, also usable as the ZCD1 analog test pad. |
| 33 | U0RXD | bidirectional | UART0 receive data, also routable to GPIO10 through IO MUX. |
| 34 | U0TXD | bidirectional | UART0 transmit data, also routable to GPIO11 through IO MUX. |
| 35 | GPIO29 | bidirectional | General-purpose IO powered from VDDPST2. |
| 36 | GPIO7 | bidirectional | Strapping pin for the JTAG signal source, also usable as FSPID SPI2 data input. |
| 37 | VDDA1 | power_in | Input supply for the analog power domain. |
| 38 | XTAL_N | passive | Negative side of the external crystal clock connection to the chip's crystal. |
| 39 | XTAL_P | passive | Positive side of the external crystal clock connection to the chip's crystal. |
| 40 | VDDA2 | power_in | Input supply for the analog power domain. |
| 41 | GND | power_in | External ground connection, serving as the exposed ground pad. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm |
| Category | RF and Wireless |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage on power pins (allowed input voltage) | | -0.3 | | 3.6 | V | | 56 |
| Cumulative IO output current | Ioutput | | | 1500 | mA | | 56 |
| Storage temperature | TSTORE | -40 | | 150 | °C | | 56 |
| Recommended input voltage | VDDA1, VDDA2, VDDA3P3 | 3 | 3.3 | 3.6 | V | | 56 |
| Recommended input voltage (as input) | VDD_SPI | 1.8 | 3.3 | 3.6 | V | | 56 |
| Cumulative input current | IVDD | 0.5 | | | A | | 56 |
| Time reserved for power rails to stabilize before CHIP_PU is pulled high | tST BL | 50 | | | µs | | 25 |
| Time reserved for CHIP_PU to stay below VIL_nRST to reset the chip | tRST | 50 | | | µs | | 25 |
| VDD_SPI internal resistance RSPI | RSPI | | 3 | | Ω | VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM | 57 |
| Differential nonlinearity (DNL) | DNL | -5 | | 5 | LSB | | 57 |
| Integral nonlinearity (INL) | INL | -5 | | 5 | LSB | | 57 |
| Sampling rate | | | | 2000 | kSPS | | 57 |
| ADC total error | | -10 | | 10 | mV | ATTEN0, effective measurement range of 0 ~ 1000 | 57 |
| ADC total error | | -12 | | 12 | mV | ATTEN2, effective measurement range of 0 ~ 1900 | 57 |
| ADC total error | | -15 | | 15 | mV | ATTEN3, effective measurement range of 0 ~ 3300 | 57 |
| TX EVM limit | | | -24.8 | -10 | dB | 802.11b, 1 Mbps, DSSS | 61 |
| TX EVM limit | | | -26 | -5 | dB | 802.11g, 6 Mbps, OFDM | 62 |
| TX EVM limit | | | -29 | -25 | dB | 802.11g, 54 Mbps, OFDM | 62 |
| TX EVM limit | | | -24.5 | -5 | dB | 802.11n, HT20, MCS0 | 62 |
| TX EVM limit | | | -31.5 | -27 | dB | 802.11n, HT20, MCS7 | 62 |
| TX EVM limit | | | -26.8 | -5 | dB | 802.11n, HT40, MCS0 | 62 |
| TX EVM limit | | | -30.5 | -27 | dB | 802.11n, HT40, MCS7 | 62 |
## CAD (KiCad official)
- Symbol: `ESP32-C61HR8`
- Footprint: `PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm`
- 3D model: QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm, generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `esp32-c61hr8-etched.step` / `esp32-c61hr8-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `esp32-c61hr8.step` / `esp32-c61hr8.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Espressif Systems datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c61_datasheet_en.pdf) (73 pp, sha256 `03027bec333fe7c0`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/esp32-c61hr8-datasheet.pdf)