Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ESP32-C61HR8

Espressif Systems · RF and Wireless · QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm

ESP32-C61HR8 from Espressif Systems, in a QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANT_2G bidirectional RF input/output pin for the 2.4 GHz antenna connection.
2 VDDA3 power_in Input supply for the analog power domain.
3 VDDA4 power_in Input supply for the analog power domain.
4 CHIP_PU input Chip enable: high powers up the chip and low powers it down, and it must not be left floating.
5 VDDPST1 power_in Input supply for the HP digital and part of the LP digital power domains, including the LP IO pins.
6 XTAL_32K_P bidirectional Positive side of the differential 32 kHz clock connection to the external crystal, also usable as GPIO0 and LP_GPIO0.
7 XTAL_32K_N bidirectional Negative side of the differential 32 kHz clock connection to the external crystal, also usable as GPIO1 and ADC1_CH0.
8 GPIO2 bidirectional General-purpose IO with LP_GPIO2 and FSPIQ SPI2 functions, with a default drive strength of 20 mA.
9 MTMS bidirectional JTAG test mode select, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH1.
10 MTDI bidirectional JTAG test data input, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH2.
11 MTCK bidirectional JTAG test clock, also usable as GPIO5 and ADC1_CH3.
12 MTDO tri_state JTAG test data output with high-impedance (T) type, also usable as GPIO6.
13 SDIO_CMD bidirectional SDIO slave command line, powered from VDDPST2 and also usable as GPIO25.
14 SDIO_CLK input SDIO slave clock input, powered from VDDPST2 and also usable as GPIO26.
15 SDIO_DATA0 bidirectional SDIO slave data line 0, powered from VDDPST2 and also usable as GPIO27.
16 SDIO_DATA1 bidirectional SDIO slave data line 1, powered from VDDPST2 and also usable as GPIO28.
17 SDIO_DATA2 bidirectional SDIO slave data line 2, powered from VDDPST2 and also usable as GPIO22.
18 SDIO_DATA3 bidirectional SDIO slave data line 3, powered from VDDPST2 and also usable as GPIO23.
19 SPICS1 bidirectional SPI chip select 1 for the off-package PSRAM interface, also usable as GPIO14; it is not NC on HR8 because the variant has in-package PSRAM.
20 SPICS0 bidirectional SPI chip select 0 for flash access, also usable as GPIO15; it is powered from VDD_SPI or VDDPST2.
21 VDDPST2 power_in Input supply for the HP digital power domain that powers the HP IO pins.
22 SPIQ bidirectional SPI data line (MISO / SIO1) to the in-package flash or PSRAM, also usable as GPIO16.
23 SPIWP bidirectional SPI write protect (SIO2) to the in-package flash or PSRAM, also usable as GPIO17.
24 VDD_SPI power_out Output supplied from VDDPST2 that powers the in-package flash or PSRAM.
25 SPIHD bidirectional SPI hold (SIO3) to the in-package flash or PSRAM, also usable as GPIO19.
26 SPICLK output SPI clock output to the in-package flash or PSRAM, also usable as GPIO20.
27 SPID bidirectional SPI data line (MOSI / SIO0) to the in-package flash or PSRAM, also usable as GPIO21.
28 USB_D- bidirectional USB data negative for the USB Serial/JTAG controller, also usable as GPIO12, with a default drive strength of 40 mA.
29 USB_D+ bidirectional USB data positive for the USB Serial/JTAG controller, also usable as GPIO13, with a default drive strength of 40 mA.
30 GPIO24 bidirectional General-purpose IO powered from VDDPST2.
31 GPIO8 bidirectional Strapping pin for chip boot mode and ROM message printing, also usable as FSPICS0 and as the ZCD0 analog reference pad.
32 GPIO9 bidirectional Strapping pin for chip boot mode, pulled up by default, also usable as the ZCD1 analog test pad.
33 U0RXD bidirectional UART0 receive data, also routable to GPIO10 through IO MUX.
34 U0TXD bidirectional UART0 transmit data, also routable to GPIO11 through IO MUX.
35 GPIO29 bidirectional General-purpose IO powered from VDDPST2.
36 GPIO7 bidirectional Strapping pin for the JTAG signal source, also usable as FSPID SPI2 data input.
37 VDDA1 power_in Input supply for the analog power domain.
38 XTAL_N passive Negative side of the external crystal clock connection to the chip's crystal.
39 XTAL_P passive Positive side of the external crystal clock connection to the chip's crystal.
40 VDDA2 power_in Input supply for the analog power domain.
41 GND power_in External ground connection, serving as the exposed ground pad.

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm
Category RF and Wireless
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage on power pins (allowed input voltage) -0.3 3.6 V 56
Cumulative IO output current Ioutput 1500 mA 56
Storage temperature TSTORE -40 150 °C 56
Recommended input voltage VDDA1, VDDA2, VDDA3P3 3 3.3 3.6 V 56
Recommended input voltage (as input) VDD_SPI 1.8 3.3 3.6 V 56
Cumulative input current IVDD 0.5 A 56
Time reserved for power rails to stabilize before CHIP_PU is pulled high tST BL 50 µs 25
Time reserved for CHIP_PU to stay below VIL_nRST to reset the chip tRST 50 µs 25
VDD_SPI internal resistance RSPI RSPI 3 Ω VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM 57
Differential nonlinearity (DNL) DNL -5 5 LSB 57
Integral nonlinearity (INL) INL -5 5 LSB 57
Sampling rate 2000 kSPS 57
ADC total error -10 10 mV ATTEN0, effective measurement range of 0 ~ 1000 57
ADC total error -12 12 mV ATTEN2, effective measurement range of 0 ~ 1900 57
ADC total error -15 15 mV ATTEN3, effective measurement range of 0 ~ 3300 57
TX EVM limit -24.8 -10 dB 802.11b, 1 Mbps, DSSS 61
TX EVM limit -26 -5 dB 802.11g, 6 Mbps, OFDM 62
TX EVM limit -29 -25 dB 802.11g, 54 Mbps, OFDM 62
TX EVM limit -24.5 -5 dB 802.11n, HT20, MCS0 62
TX EVM limit -31.5 -27 dB 802.11n, HT20, MCS7 62
TX EVM limit -26.8 -5 dB 802.11n, HT40, MCS0 62
TX EVM limit -30.5 -27 dB 802.11n, HT40, MCS7 62

CAD (KiCad official)

  • Symbol: ESP32-C61HR8
  • Footprint: PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm
  • 3D model: QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm, generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: esp32-c61hr8-etched.step / esp32-c61hr8-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-c61hr8.step / esp32-c61hr8.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (73 pp, sha256 03027bec333fe7c0, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF