main
History Download
Ray Publish 0.1.0 a35c7e0

ESP32-C61HR2

Espressif Systems · RF and Wireless · 40-VFQFN Exposed Pad

ESP32-C61HR2 from Espressif Systems, in a 40-VFQFN Exposed Pad. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANT_2G passive RF input/output pin for the 2.4 GHz antenna connection.
2 VDDA3 power_in Input supply for the analog power domain; this rail must stabilize before CHIP_PU is pulled high.
3 VDDA4 power_in Input supply for the analog power domain; this rail must stabilize before CHIP_PU is pulled high.
4 CHIP_PU input Enable pin: high powers up the chip and low powers it down, and it must not be left floating.
5 VDDPST1 power_in Supplies the HP digital and part of the LP digital power domains, including the LP IO pins.
6 XTAL_32K_P bidirectional Positive terminal of the differential 32 kHz clock connection to the external crystal, also available as GPIO0 and LP_GPIO0.
7 XTAL_32K_N bidirectional Negative terminal of the differential 32 kHz clock connection to the external crystal, also available as GPIO1, LP_GPIO1 and ADC1_CH0.
8 GPIO2 bidirectional General-purpose IO with alternate functions FSPIQ and LP_GPIO2, and a default drive strength of 20 mA.
9 MTMS bidirectional JTAG test mode select, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH1.
10 MTDI bidirectional JTAG test data input, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH2.
11 MTCK input JTAG test clock input, also available as GPIO5, LP_GPIO5 and ADC1_CH3.
12 MTDO tri_state JTAG test data output with high-impedance capability, also available as GPIO6 and FSPICLK.
13 SDIO_CMD bidirectional SDIO slave command line, also available as GPIO25, powered from VDDPST2.
14 SDIO_CLK input SDIO slave clock input, also available as GPIO26, powered from VDDPST2.
15 SDIO_DATA0 bidirectional SDIO slave data line 0, also available as GPIO27, powered from VDDPST2.
16 SDIO_DATA1 bidirectional SDIO slave data line 1, also available as GPIO28, powered from VDDPST2.
17 SDIO_DATA2 bidirectional SDIO slave data line 2, also available as GPIO22, powered from VDDPST2.
18 SDIO_DATA3 bidirectional SDIO slave data line 3, also available as GPIO23, powered from VDDPST2.
19 SPICS1 bidirectional SPI chip select 1 used to access off-package PSRAM, also available as GPIO14.
20 SPICS0 tri_state SPI chip select 0 used to access off-package flash, also available as GPIO15.
21 VDDPST2 power_in Supplies the HP digital power domain and the HP IO pins.
22 SPIQ bidirectional SPI data line used as MISO/SIO1 for off-package flash or PSRAM, also available as GPIO16.
23 SPIWP bidirectional SPI write protect used as SIO2 for off-package flash, also available as GPIO17.
24 VDD_SPI power_out Output supply derived from VDDPST2 that powers the flash or PSRAM, and cannot be used as a digital function pin when used for that purpose.
25 SPIHD bidirectional SPI hold line used as SIO3 for off-package flash, also available as GPIO19.
26 SPICLK tri_state SPI clock output to the flash or PSRAM, also available as GPIO20.
27 SPID bidirectional SPI data line used as MOSI/SIO0 for off-package flash or PSRAM, also available as GPIO21.
28 USB_D- bidirectional USB differential data negative for the USB Serial/JTAG controller, also available as GPIO12 with a default drive strength of 40 mA.
29 USB_D+ bidirectional USB differential data positive for the USB Serial/JTAG controller, also available as GPIO13 with a default drive strength of 40 mA.
30 GPIO24 bidirectional General-purpose IO with a default drive strength of 20 mA.
31 GPIO8 bidirectional Strapping pin for chip boot mode, also available as FSPICS0 and as the ZCD0 comparator reference pad.
32 GPIO9 bidirectional Strapping pin for chip boot mode with an internal weak pull-up enabled, also the ZCD1 comparator test pad.
33 U0RXD bidirectional UART0 receive data input, also available as GPIO10, used by default for UART0 boot and download.
34 U0TXD bidirectional UART0 transmit data output, also available as GPIO11, used by default for UART0 boot and download.
35 GPIO29 bidirectional General-purpose IO.
36 GPIO7 bidirectional Strapping pin for the JTAG signal source, also available as FSPID; it is floating by default.
37 VDDA1 power_in Input supply for the analog power domain.
38 XTAL_N passive External clock input/output connected to the chip's crystal, negative terminal.
39 XTAL_P passive External clock input/output connected to the chip's crystal, positive terminal.
40 VDDA2 power_in Input supply for the analog power domain.
41 GND power_in External ground connection (exposed pad).

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package 40-VFQFN Exposed Pad
Category RF and Wireless
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Allowed input voltage (input power pins) -0.3 3.6 V 56
Cumulative IO output current Ioutput 1500 mA 56
Storage temperature -40 150 °C 56
VDDA1, VDDA2, VDDA3P3 Recommended input voltage 3 3.3 3.6 V 56
VDDPST1 Recommended input voltage 3 3.3 3.6 V 56
VDD_SPI (as input) Recommended input voltage 1.8 3.3 3.6 V 56
VDDPST2 Recommended input voltage 3 3.3 3.6 V 56
Cumulative input current IVDD 0.5 A 56
Internal resistance RSPI, VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM RSPI 3 Ω VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM 57
ADC differential nonlinearity (DNL) DNL -5 5 LSB 57
ADC integral nonlinearity (INL) INL -5 5 LSB 57
ADC sampling rate 2000 kSPS 57
ADC total error, ATTEN0 -10 10 mV ATTEN0, effective measurement range of 0 ~ 1000 57
ADC total error, ATTEN1 -10 10 mV ATTEN1, effective measurement range of 0 ~ 1300 57
ADC total error, ATTEN2 -12 12 mV ATTEN2, effective measurement range of 0 ~ 1900 57
ADC total error, ATTEN3 -15 15 mV ATTEN3, effective measurement range of 0 ~ 3300 57
tST BL time for power rails to stabilize before CHIP_PU pulled high tST BL 50 µs 25
tRST time for CHIP_PU to stay below VIL_nRST to reset the chip tRST 50 µs 25
Power supply voltage (1.8 V) flash VCC 1.65 1.8 2 V 59
Power supply voltage (3.3 V) flash VCC 2.7 3.3 3.6 V 59
Flash maximum clock frequency FC 80 MHz 59
Flash program/erase cycles 100000 cycles 59
Flash data retention time TRET 20 years 59
Flash page program time TPP 0.8 5 ms 59
Flash sector erase time (4 KB) TSE 70 500 ms 59
Flash block erase time (32 KB) TBE1 0.2 2 s 59
Flash block erase time (64 KB) TBE2 0.3 3 s 59
Flash chip erase time (16 Mb) TCE 7 20 s 59
Flash chip erase time (32 Mb) TCE 20 60 s 59
Flash chip erase time (64 Mb) TCE 25 100 s 59
Flash chip erase time (128 Mb) TCE 60 200 s 59
Flash chip erase time (256 Mb) TCE 70 300 s 59
Power supply voltage (1.8 V) PSRAM VCC 1.62 1.8 1.98 V 59
Power supply voltage (3.3 V) PSRAM VCC 2.7 3.3 3.6 V 59
PSRAM maximum clock frequency FC 80 MHz 59
Center frequency range of operating channel (Wi-Fi) 2412 2484 MHz 61
Center frequency range of operating channel (Bluetooth LE) 2402 2480 MHz 64
RF transmit power range (Bluetooth LE) -15 20 dBm 64
Sensitivity @30.8% PER, Bluetooth LE 1 Mbps -98 dBm @30.8% PER 65
Maximum received signal @30.8% PER, Bluetooth LE 1 Mbps 8 dBm @30.8% PER 65
Sensitivity @30.8% PER, Bluetooth LE 2 Mbps -94 dBm @30.8% PER 66
Maximum received signal @30.8% PER, Bluetooth LE 2 Mbps 8 dBm @30.8% PER 66
Sensitivity @30.8% PER, Bluetooth LE 125 Kbps -106 dBm @30.8% PER 67
Maximum received signal @30.8% PER, Bluetooth LE 125 Kbps 8 dBm @30.8% PER 67
Sensitivity @30.8% PER, Bluetooth LE 500 Kbps -102 dBm @30.8% PER 67
Maximum received signal @30.8% PER, Bluetooth LE 500 Kbps 8 dBm @30.8% PER 67

CAD (KiCad official)

  • Symbol: ESP32-C61HR2
  • Footprint: PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm
  • 3D model: 40-VFQFN Exposed Pad, generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: esp32-c61hr2-etched.step / esp32-c61hr2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-c61hr2.step / esp32-c61hr2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (73 pp, sha256 03027bec333fe7c0, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF