3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownESP32-C61HR2
Espressif Systems · RF and Wireless · 40-VFQFN Exposed Pad
ESP32-C61HR2 from Espressif Systems, in a 40-VFQFN Exposed Pad. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT_2G | passive | RF input/output pin for the 2.4 GHz antenna connection. |
| 2 | VDDA3 | power_in | Input supply for the analog power domain; this rail must stabilize before CHIP_PU is pulled high. |
| 3 | VDDA4 | power_in | Input supply for the analog power domain; this rail must stabilize before CHIP_PU is pulled high. |
| 4 | CHIP_PU | input | Enable pin: high powers up the chip and low powers it down, and it must not be left floating. |
| 5 | VDDPST1 | power_in | Supplies the HP digital and part of the LP digital power domains, including the LP IO pins. |
| 6 | XTAL_32K_P | bidirectional | Positive terminal of the differential 32 kHz clock connection to the external crystal, also available as GPIO0 and LP_GPIO0. |
| 7 | XTAL_32K_N | bidirectional | Negative terminal of the differential 32 kHz clock connection to the external crystal, also available as GPIO1, LP_GPIO1 and ADC1_CH0. |
| 8 | GPIO2 | bidirectional | General-purpose IO with alternate functions FSPIQ and LP_GPIO2, and a default drive strength of 20 mA. |
| 9 | MTMS | bidirectional | JTAG test mode select, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH1. |
| 10 | MTDI | bidirectional | JTAG test data input, also a strapping pin for the SDIO sampling and driving clock edge, and ADC1_CH2. |
| 11 | MTCK | input | JTAG test clock input, also available as GPIO5, LP_GPIO5 and ADC1_CH3. |
| 12 | MTDO | tri_state | JTAG test data output with high-impedance capability, also available as GPIO6 and FSPICLK. |
| 13 | SDIO_CMD | bidirectional | SDIO slave command line, also available as GPIO25, powered from VDDPST2. |
| 14 | SDIO_CLK | input | SDIO slave clock input, also available as GPIO26, powered from VDDPST2. |
| 15 | SDIO_DATA0 | bidirectional | SDIO slave data line 0, also available as GPIO27, powered from VDDPST2. |
| 16 | SDIO_DATA1 | bidirectional | SDIO slave data line 1, also available as GPIO28, powered from VDDPST2. |
| 17 | SDIO_DATA2 | bidirectional | SDIO slave data line 2, also available as GPIO22, powered from VDDPST2. |
| 18 | SDIO_DATA3 | bidirectional | SDIO slave data line 3, also available as GPIO23, powered from VDDPST2. |
| 19 | SPICS1 | bidirectional | SPI chip select 1 used to access off-package PSRAM, also available as GPIO14. |
| 20 | SPICS0 | tri_state | SPI chip select 0 used to access off-package flash, also available as GPIO15. |
| 21 | VDDPST2 | power_in | Supplies the HP digital power domain and the HP IO pins. |
| 22 | SPIQ | bidirectional | SPI data line used as MISO/SIO1 for off-package flash or PSRAM, also available as GPIO16. |
| 23 | SPIWP | bidirectional | SPI write protect used as SIO2 for off-package flash, also available as GPIO17. |
| 24 | VDD_SPI | power_out | Output supply derived from VDDPST2 that powers the flash or PSRAM, and cannot be used as a digital function pin when used for that purpose. |
| 25 | SPIHD | bidirectional | SPI hold line used as SIO3 for off-package flash, also available as GPIO19. |
| 26 | SPICLK | tri_state | SPI clock output to the flash or PSRAM, also available as GPIO20. |
| 27 | SPID | bidirectional | SPI data line used as MOSI/SIO0 for off-package flash or PSRAM, also available as GPIO21. |
| 28 | USB_D- | bidirectional | USB differential data negative for the USB Serial/JTAG controller, also available as GPIO12 with a default drive strength of 40 mA. |
| 29 | USB_D+ | bidirectional | USB differential data positive for the USB Serial/JTAG controller, also available as GPIO13 with a default drive strength of 40 mA. |
| 30 | GPIO24 | bidirectional | General-purpose IO with a default drive strength of 20 mA. |
| 31 | GPIO8 | bidirectional | Strapping pin for chip boot mode, also available as FSPICS0 and as the ZCD0 comparator reference pad. |
| 32 | GPIO9 | bidirectional | Strapping pin for chip boot mode with an internal weak pull-up enabled, also the ZCD1 comparator test pad. |
| 33 | U0RXD | bidirectional | UART0 receive data input, also available as GPIO10, used by default for UART0 boot and download. |
| 34 | U0TXD | bidirectional | UART0 transmit data output, also available as GPIO11, used by default for UART0 boot and download. |
| 35 | GPIO29 | bidirectional | General-purpose IO. |
| 36 | GPIO7 | bidirectional | Strapping pin for the JTAG signal source, also available as FSPID; it is floating by default. |
| 37 | VDDA1 | power_in | Input supply for the analog power domain. |
| 38 | XTAL_N | passive | External clock input/output connected to the chip's crystal, negative terminal. |
| 39 | XTAL_P | passive | External clock input/output connected to the chip's crystal, positive terminal. |
| 40 | VDDA2 | power_in | Input supply for the analog power domain. |
| 41 | GND | power_in | External ground connection (exposed pad). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | 40-VFQFN Exposed Pad |
| Category | RF and Wireless |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Allowed input voltage (input power pins) | -0.3 | 3.6 | V | 56 | |||
| Cumulative IO output current | Ioutput | 1500 | mA | 56 | |||
| Storage temperature | -40 | 150 | °C | 56 | |||
| VDDA1, VDDA2, VDDA3P3 Recommended input voltage | 3 | 3.3 | 3.6 | V | 56 | ||
| VDDPST1 Recommended input voltage | 3 | 3.3 | 3.6 | V | 56 | ||
| VDD_SPI (as input) Recommended input voltage | 1.8 | 3.3 | 3.6 | V | 56 | ||
| VDDPST2 Recommended input voltage | 3 | 3.3 | 3.6 | V | 56 | ||
| Cumulative input current | IVDD | 0.5 | A | 56 | |||
| Internal resistance RSPI, VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM | RSPI | 3 | Ω | VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM | 57 | ||
| ADC differential nonlinearity (DNL) | DNL | -5 | 5 | LSB | 57 | ||
| ADC integral nonlinearity (INL) | INL | -5 | 5 | LSB | 57 | ||
| ADC sampling rate | 2000 | kSPS | 57 | ||||
| ADC total error, ATTEN0 | -10 | 10 | mV | ATTEN0, effective measurement range of 0 ~ 1000 | 57 | ||
| ADC total error, ATTEN1 | -10 | 10 | mV | ATTEN1, effective measurement range of 0 ~ 1300 | 57 | ||
| ADC total error, ATTEN2 | -12 | 12 | mV | ATTEN2, effective measurement range of 0 ~ 1900 | 57 | ||
| ADC total error, ATTEN3 | -15 | 15 | mV | ATTEN3, effective measurement range of 0 ~ 3300 | 57 | ||
| tST BL time for power rails to stabilize before CHIP_PU pulled high | tST BL | 50 | µs | 25 | |||
| tRST time for CHIP_PU to stay below VIL_nRST to reset the chip | tRST | 50 | µs | 25 | |||
| Power supply voltage (1.8 V) flash | VCC | 1.65 | 1.8 | 2 | V | 59 | |
| Power supply voltage (3.3 V) flash | VCC | 2.7 | 3.3 | 3.6 | V | 59 | |
| Flash maximum clock frequency | FC | 80 | MHz | 59 | |||
| Flash program/erase cycles | 100000 | cycles | 59 | ||||
| Flash data retention time | TRET | 20 | years | 59 | |||
| Flash page program time | TPP | 0.8 | 5 | ms | 59 | ||
| Flash sector erase time (4 KB) | TSE | 70 | 500 | ms | 59 | ||
| Flash block erase time (32 KB) | TBE1 | 0.2 | 2 | s | 59 | ||
| Flash block erase time (64 KB) | TBE2 | 0.3 | 3 | s | 59 | ||
| Flash chip erase time (16 Mb) | TCE | 7 | 20 | s | 59 | ||
| Flash chip erase time (32 Mb) | TCE | 20 | 60 | s | 59 | ||
| Flash chip erase time (64 Mb) | TCE | 25 | 100 | s | 59 | ||
| Flash chip erase time (128 Mb) | TCE | 60 | 200 | s | 59 | ||
| Flash chip erase time (256 Mb) | TCE | 70 | 300 | s | 59 | ||
| Power supply voltage (1.8 V) PSRAM | VCC | 1.62 | 1.8 | 1.98 | V | 59 | |
| Power supply voltage (3.3 V) PSRAM | VCC | 2.7 | 3.3 | 3.6 | V | 59 | |
| PSRAM maximum clock frequency | FC | 80 | MHz | 59 | |||
| Center frequency range of operating channel (Wi-Fi) | 2412 | 2484 | MHz | 61 | |||
| Center frequency range of operating channel (Bluetooth LE) | 2402 | 2480 | MHz | 64 | |||
| RF transmit power range (Bluetooth LE) | -15 | 20 | dBm | 64 | |||
| Sensitivity @30.8% PER, Bluetooth LE 1 Mbps | -98 | dBm | @30.8% PER | 65 | |||
| Maximum received signal @30.8% PER, Bluetooth LE 1 Mbps | 8 | dBm | @30.8% PER | 65 | |||
| Sensitivity @30.8% PER, Bluetooth LE 2 Mbps | -94 | dBm | @30.8% PER | 66 | |||
| Maximum received signal @30.8% PER, Bluetooth LE 2 Mbps | 8 | dBm | @30.8% PER | 66 | |||
| Sensitivity @30.8% PER, Bluetooth LE 125 Kbps | -106 | dBm | @30.8% PER | 67 | |||
| Maximum received signal @30.8% PER, Bluetooth LE 125 Kbps | 8 | dBm | @30.8% PER | 67 | |||
| Sensitivity @30.8% PER, Bluetooth LE 500 Kbps | -102 | dBm | @30.8% PER | 67 | |||
| Maximum received signal @30.8% PER, Bluetooth LE 500 Kbps | 8 | dBm | @30.8% PER | 67 |
CAD (KiCad official)
- Symbol:
ESP32-C61HR2 - Footprint:
PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm - 3D model: 40-VFQFN Exposed Pad, generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
esp32-c61hr2-etched.step/esp32-c61hr2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c61hr2.step/esp32-c61hr2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (73 pp, sha256
03027bec333fe7c0, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).