main
History Download
Ray esp32-c61hf4: CAD wording names Espressif's KiCad libraries, not KiCad official 6d4018e

ESP32-C61HF4

Espressif Systems · RF and Wireless · 28-SMD Module

ESP32-C61HF4 from Espressif Systems, in a 28-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ANT_2G passive RF input/output pin for the 2.4 GHz antenna.
2 VDDA3 power_in Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ).
3 VDDA4 power_in Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ).
4 CHIP_PU input Chip enable and reset: high powers the chip on, low powers it off, and the pin must not be left floating.
5 VDDPST1 power_in Supply input for the HP digital and part of the LP digital power domains (LP IO), recommended 3.0 V to 3.6 V.
6 XTAL_32K_P bidirectional GPIO0/LP_GPIO0 pin powered by VDDPST1 that also serves as the positive 32 kHz crystal or external slow clock input.
7 XTAL_32K_N bidirectional GPIO1/LP_GPIO1 pin powered by VDDPST1 that also serves as the negative 32 kHz crystal input or ADC1_CH0.
8 GPIO2 bidirectional General-purpose I/O (LP_GPIO2, FSPIQ) powered by VDDPST1.
9 MTMS bidirectional JTAG test mode select, also GPIO3, LP_GPIO3 and ADC1_CH1; strapping pin (floating by default) for SDIO clock edge selection.
10 MTDI bidirectional JTAG test data in, also GPIO4, LP_GPIO4 and ADC1_CH2; strapping pin (floating by default) for SDIO clock edge selection.
11 MTCK bidirectional JTAG test clock, also GPIO5, LP_GPIO5 and ADC1_CH3, powered by VDDPST1.
12 MTDO bidirectional JTAG test data out, also GPIO6, LP_GPIO6 and FSPICLK, powered by VDDPST1.
13 SDIO_CMD bidirectional SDIO slave command line (alternate GPIO25) powered by VDDPST2.
14 SDIO_CLK bidirectional SDIO slave clock input (alternate GPIO26) powered by VDDPST2.
15 SDIO_DATA0 bidirectional SDIO slave data line 0 (alternate GPIO27) powered by VDDPST2.
16 SDIO_DATA1 bidirectional SDIO slave data line 1 (alternate GPIO28) powered by VDDPST2.
17 SDIO_DATA2 bidirectional SDIO slave data line 2 (alternate GPIO22) powered by VDDPST2.
18 SDIO_DATA3 bidirectional SDIO slave data line 3 (alternate GPIO23) powered by VDDPST2.
19 SPICS1 bidirectional SPI chip select 1 (alternate GPIO14) powered by VDD_SPI/VDDPST2, used to access PSRAM; not listed as NC for ESP32-C61HF4.
20 NC no_connect Not connected on ESP32-C61HF4 (the SPICS0 pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
21 VDDPST2 power_in Supply input for the HP digital power domain (HP IO), recommended 3.0 V to 3.6 V and not above 3.3 V when writing eFuses.
22 NC no_connect Not connected on ESP32-C61HF4 (the SPIQ pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
23 NC no_connect Not connected on ESP32-C61HF4 (the SPIWP pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
24 NC no_connect Not connected on ESP32-C61HF4 (the VDD_SPI pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
25 NC no_connect Not connected on ESP32-C61HF4 (the SPIHD pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
26 NC no_connect Not connected on ESP32-C61HF4 (the SPICLK pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
27 NC no_connect Not connected on ESP32-C61HF4 (the SPID pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).'
28 USB_D- bidirectional USB Serial/JTAG data minus (GPIO12) powered by VDDPST2, input enabled after reset.
29 USB_D+ bidirectional USB Serial/JTAG data plus (GPIO13) powered by VDDPST2, input enabled with weak pull-up after reset.
30 GPIO24 bidirectional General-purpose I/O powered by VDDPST2.
31 GPIO8 bidirectional General-purpose I/O (FSPICS0, ZCD0) powered by VDDPST2; strapping pin for boot mode and ROM message printing control.
32 GPIO9 bidirectional General-purpose I/O (ZCD1) powered by VDDPST2; strapping pin for boot mode (pull-up default, 1 = SPI Boot, 0 with GPIO8=1 = Joint Download Boot).
33 U0RXD bidirectional UART0 receive data (GPIO10) powered by VDDPST2, input with weak pull-up enabled after reset.
34 U0TXD bidirectional UART0 transmit data (GPIO11) powered by VDDPST2, input with weak pull-up enabled after reset.
35 GPIO29 bidirectional General-purpose I/O powered by VDDPST2.
36 GPIO7 bidirectional General-purpose I/O (FSPID) powered by VDDPST2; strapping pin for JTAG signal source control with no internal pull resistors.
37 VDDA1 power_in Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ).
38 XTAL_N passive Negative side of the differential external 40 MHz crystal clock input/output.
39 XTAL_P passive Positive side of the differential external 40 MHz crystal clock input/output.
40 VDDA2 power_in Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ).
41 GND power_in External ground connection (exposed pad).

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package 28-SMD Module
Category RF and Wireless
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Allowed input voltage -0.3 3.6 V Input power pins 56
Cumulative IO output current 1500 mA 56
Storage temperature -40 150 °C 56
Recommended input voltage VDDA1, VDDA2, VDDA3P3 3 3.3 3.6 V 56
Recommended input voltage VDDPST1 VDDPST1 3 3.3 3.6 V 56
Recommended input voltage VDD_SPI (as input) VDD_SPI 1.8 3.3 3.6 V 56
Recommended input voltage VDDPST2 VDDPST2 3 3.3 3.6 V 56
Cumulative input current IVDD 0.5 A 56
Differential nonlinearity (DNL) DNL -5 5 LSB 57
Integral nonlinearity (INL) INL -5 5 LSB 57
Sampling rate 2000 kSPS 57
ADC total error -10 10 mV ATTEN0, effective measurement range 0 ~ 1000 57
ADC total error -12 12 mV ATTEN2, effective measurement range 0 ~ 1900 57
ADC total error -15 15 mV ATTEN3, effective measurement range 0 ~ 3300 57
Flash power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V Flash, power supply voltage (3.3 V) 59
Flash maximum clock frequency FC 80 MHz Flash 59
Flash program/erase cycles 100000 cycles Flash 59
Flash data retention time TRET 20 years Flash 59
Flash page program time TPP 0.8 5 ms Flash 59
Flash sector erase time (4 KB) TSE 70 500 ms Flash 59
Flash block erase time (32 KB) TBE1 0.2 2 s Flash 59
Flash block erase time (64 KB) TBE2 0.3 3 s Flash 59
Flash chip erase time (16 Mb) TCE 7 20 s Flash, chip erase 16 Mb 59
Flash chip erase time (32 Mb) TCE 20 60 s Flash, chip erase 32 Mb 59
Flash chip erase time (64 Mb) TCE 25 100 s Flash, chip erase 64 Mb 59
Flash chip erase time (128 Mb) TCE 60 200 s Flash, chip erase 128 Mb 59
Flash chip erase time (256 Mb) TCE 70 300 s Flash, chip erase 256 Mb 59
ESD HBM (Human Body Model) -2000 2000 V JS-001 60
ESD CDM (Charge Device Model) -1000 1000 V JS-002 60
Latch-up current trigger -200 200 mA JESD78, current trigger 60
VDD_SPI output resistance RSPI RSPI 3 Ω VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM 57

CAD (land: Espressif; 3D: generated from the datasheet)

  • Symbol: ESP32-C61HF4
  • Footprint: PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm
  • 3D model: 28-SMD Module, generated on the Espressif land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: esp32-c61hf4-etched.step / esp32-c61hf4-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-c61hf4.step / esp32-c61hf4.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (73 pp, sha256 03027bec333fe7c0, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions.

Datasheet PDF