Made with kicad-footprint-generator 10.0 · KiCad file format 20260206
ESP32-C61HF4
Espressif Systems · RF and Wireless · 28-SMD Module
ESP32-C61HF4 from Espressif Systems, in a 28-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT_2G | passive | RF input/output pin for the 2.4 GHz antenna. |
| 2 | VDDA3 | power_in | Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ). |
| 3 | VDDA4 | power_in | Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ). |
| 4 | CHIP_PU | input | Chip enable and reset: high powers the chip on, low powers it off, and the pin must not be left floating. |
| 5 | VDDPST1 | power_in | Supply input for the HP digital and part of the LP digital power domains (LP IO), recommended 3.0 V to 3.6 V. |
| 6 | XTAL_32K_P | bidirectional | GPIO0/LP_GPIO0 pin powered by VDDPST1 that also serves as the positive 32 kHz crystal or external slow clock input. |
| 7 | XTAL_32K_N | bidirectional | GPIO1/LP_GPIO1 pin powered by VDDPST1 that also serves as the negative 32 kHz crystal input or ADC1_CH0. |
| 8 | GPIO2 | bidirectional | General-purpose I/O (LP_GPIO2, FSPIQ) powered by VDDPST1. |
| 9 | MTMS | bidirectional | JTAG test mode select, also GPIO3, LP_GPIO3 and ADC1_CH1; strapping pin (floating by default) for SDIO clock edge selection. |
| 10 | MTDI | bidirectional | JTAG test data in, also GPIO4, LP_GPIO4 and ADC1_CH2; strapping pin (floating by default) for SDIO clock edge selection. |
| 11 | MTCK | bidirectional | JTAG test clock, also GPIO5, LP_GPIO5 and ADC1_CH3, powered by VDDPST1. |
| 12 | MTDO | bidirectional | JTAG test data out, also GPIO6, LP_GPIO6 and FSPICLK, powered by VDDPST1. |
| 13 | SDIO_CMD | bidirectional | SDIO slave command line (alternate GPIO25) powered by VDDPST2. |
| 14 | SDIO_CLK | bidirectional | SDIO slave clock input (alternate GPIO26) powered by VDDPST2. |
| 15 | SDIO_DATA0 | bidirectional | SDIO slave data line 0 (alternate GPIO27) powered by VDDPST2. |
| 16 | SDIO_DATA1 | bidirectional | SDIO slave data line 1 (alternate GPIO28) powered by VDDPST2. |
| 17 | SDIO_DATA2 | bidirectional | SDIO slave data line 2 (alternate GPIO22) powered by VDDPST2. |
| 18 | SDIO_DATA3 | bidirectional | SDIO slave data line 3 (alternate GPIO23) powered by VDDPST2. |
| 19 | SPICS1 | bidirectional | SPI chip select 1 (alternate GPIO14) powered by VDD_SPI/VDDPST2, used to access PSRAM; not listed as NC for ESP32-C61HF4. |
| 20 | NC | no_connect | Not connected on ESP32-C61HF4 (the SPICS0 pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 21 | VDDPST2 | power_in | Supply input for the HP digital power domain (HP IO), recommended 3.0 V to 3.6 V and not above 3.3 V when writing eFuses. |
| 22 | NC | no_connect | Not connected on ESP32-C61HF4 (the SPIQ pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 23 | NC | no_connect | Not connected on ESP32-C61HF4 (the SPIWP pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 24 | NC | no_connect | Not connected on ESP32-C61HF4 (the VDD_SPI pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 25 | NC | no_connect | Not connected on ESP32-C61HF4 (the SPIHD pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 26 | NC | no_connect | Not connected on ESP32-C61HF4 (the SPICLK pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 27 | NC | no_connect | Not connected on ESP32-C61HF4 (the SPID pin of the off-package-flash variants). Espressif: 'For ESP32-C61HF4, SPICS0, SPIQ, SPIWP, VDD_SPI, SPIHD, SPICLK, and SPID pins are not connected (NC).' |
| 28 | USB_D- | bidirectional | USB Serial/JTAG data minus (GPIO12) powered by VDDPST2, input enabled after reset. |
| 29 | USB_D+ | bidirectional | USB Serial/JTAG data plus (GPIO13) powered by VDDPST2, input enabled with weak pull-up after reset. |
| 30 | GPIO24 | bidirectional | General-purpose I/O powered by VDDPST2. |
| 31 | GPIO8 | bidirectional | General-purpose I/O (FSPICS0, ZCD0) powered by VDDPST2; strapping pin for boot mode and ROM message printing control. |
| 32 | GPIO9 | bidirectional | General-purpose I/O (ZCD1) powered by VDDPST2; strapping pin for boot mode (pull-up default, 1 = SPI Boot, 0 with GPIO8=1 = Joint Download Boot). |
| 33 | U0RXD | bidirectional | UART0 receive data (GPIO10) powered by VDDPST2, input with weak pull-up enabled after reset. |
| 34 | U0TXD | bidirectional | UART0 transmit data (GPIO11) powered by VDDPST2, input with weak pull-up enabled after reset. |
| 35 | GPIO29 | bidirectional | General-purpose I/O powered by VDDPST2. |
| 36 | GPIO7 | bidirectional | General-purpose I/O (FSPID) powered by VDDPST2; strapping pin for JTAG signal source control with no internal pull resistors. |
| 37 | VDDA1 | power_in | Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ). |
| 38 | XTAL_N | passive | Negative side of the differential external 40 MHz crystal clock input/output. |
| 39 | XTAL_P | passive | Positive side of the differential external 40 MHz crystal clock input/output. |
| 40 | VDDA2 | power_in | Analog power domain supply input, recommended 3.0 V to 3.6 V (3.3 V typ). |
| 41 | GND | power_in | External ground connection (exposed pad). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Espressif Systems |
| Package | 28-SMD Module |
| Category | RF and Wireless |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Allowed input voltage | -0.3 | 3.6 | V | Input power pins | 56 | ||
| Cumulative IO output current | 1500 | mA | 56 | ||||
| Storage temperature | -40 | 150 | °C | 56 | |||
| Recommended input voltage VDDA1, VDDA2, VDDA3P3 | 3 | 3.3 | 3.6 | V | 56 | ||
| Recommended input voltage VDDPST1 | VDDPST1 | 3 | 3.3 | 3.6 | V | 56 | |
| Recommended input voltage VDD_SPI (as input) | VDD_SPI | 1.8 | 3.3 | 3.6 | V | 56 | |
| Recommended input voltage VDDPST2 | VDDPST2 | 3 | 3.3 | 3.6 | V | 56 | |
| Cumulative input current | IVDD | 0.5 | A | 56 | |||
| Differential nonlinearity (DNL) | DNL | -5 | 5 | LSB | 57 | ||
| Integral nonlinearity (INL) | INL | -5 | 5 | LSB | 57 | ||
| Sampling rate | 2000 | kSPS | 57 | ||||
| ADC total error | -10 | 10 | mV | ATTEN0, effective measurement range 0 ~ 1000 | 57 | ||
| ADC total error | -12 | 12 | mV | ATTEN2, effective measurement range 0 ~ 1900 | 57 | ||
| ADC total error | -15 | 15 | mV | ATTEN3, effective measurement range 0 ~ 3300 | 57 | ||
| Flash power supply voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | Flash, power supply voltage (3.3 V) | 59 |
| Flash maximum clock frequency | FC | 80 | MHz | Flash | 59 | ||
| Flash program/erase cycles | 100000 | cycles | Flash | 59 | |||
| Flash data retention time | TRET | 20 | years | Flash | 59 | ||
| Flash page program time | TPP | 0.8 | 5 | ms | Flash | 59 | |
| Flash sector erase time (4 KB) | TSE | 70 | 500 | ms | Flash | 59 | |
| Flash block erase time (32 KB) | TBE1 | 0.2 | 2 | s | Flash | 59 | |
| Flash block erase time (64 KB) | TBE2 | 0.3 | 3 | s | Flash | 59 | |
| Flash chip erase time (16 Mb) | TCE | 7 | 20 | s | Flash, chip erase 16 Mb | 59 | |
| Flash chip erase time (32 Mb) | TCE | 20 | 60 | s | Flash, chip erase 32 Mb | 59 | |
| Flash chip erase time (64 Mb) | TCE | 25 | 100 | s | Flash, chip erase 64 Mb | 59 | |
| Flash chip erase time (128 Mb) | TCE | 60 | 200 | s | Flash, chip erase 128 Mb | 59 | |
| Flash chip erase time (256 Mb) | TCE | 70 | 300 | s | Flash, chip erase 256 Mb | 59 | |
| ESD HBM (Human Body Model) | -2000 | 2000 | V | JS-001 | 60 | ||
| ESD CDM (Charge Device Model) | -1000 | 1000 | V | JS-002 | 60 | ||
| Latch-up current trigger | -200 | 200 | mA | JESD78, current trigger | 60 | ||
| VDD_SPI output resistance RSPI | RSPI | 3 | Ω | VDD_SPI powered by VDD3P3_RTC via RSPI for 3.3 V flash/PSRAM | 57 |
CAD (land: Espressif; 3D: generated from the datasheet)
- Symbol:
ESP32-C61HF4 - Footprint:
PCM_Espressif:QFN-40-1EP_5x5mm_P0.4mm_EP3.3x3.3mm - 3D model: 28-SMD Module, generated on the Espressif land (body 5 x 5 mm, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
esp32-c61hf4-etched.step/esp32-c61hf4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);esp32-c61hf4.step/esp32-c61hf4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Espressif Systems datasheet (73 pp, sha256
03027bec333fe7c0, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions.