main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers esp32-c61-wroom-1-n8r2: viewers · Ray
esp32-c61-wroom-1-n8r2-etched.glb esp32-c61-wroom-1-n8r2: factory component page (tier=mfr) · Ray
esp32-c61-wroom-1-n8r2-etched.step esp32-c61-wroom-1-n8r2: factory component page (tier=mfr) · Ray
esp32-c61-wroom-1-n8r2.glb Publish 0.1.0 · Ray
esp32-c61-wroom-1-n8r2.kicad_mod Publish 0.1.0 · Ray
esp32-c61-wroom-1-n8r2.kicad_sym Publish 0.1.0 · Ray
esp32-c61-wroom-1-n8r2.lbr Publish 0.1.0 · Ray
esp32-c61-wroom-1-n8r2.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 29 pins · Ray

ESP32-C61-WROOM-1-N8R2

Espressif Systems · RF and Wireless · 28-SMD Module

ESP32-C61-WROOM-1-N8R2 from Espressif Systems, in a 28-SMD Module. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Footprint from Espressif's KiCad libraries (CC-BY-SA 4.0); the 3D model is Espressif Systems's.

Pinout

Pin Name Type Function
1 GND power_in Ground pin of the module.
2 3V3 power_in Module power supply input; VDD33 is specified at 3.0 V min, 3.3 V typ, 3.6 V max, with absolute maximum −0.3 V to 3.6 V.
3 EN input Chip enable: high enables the chip and low powers it off; do not leave this pin floating.
4 IO4 bidirectional GPIO4 with alternate functions MTDI, LP_GPIO4, ADC1_CH2 and FSPIWP; MTDI is a strapping pin that defaults to floating at reset.
5 IO5 bidirectional GPIO5 with alternate functions MTCK, LP_GPIO5 and ADC1_CH3.
6 IO6 bidirectional GPIO6 with alternate functions MTDO, LP_GPIO6 and FSPICLK.
7 IO7 bidirectional GPIO7 with alternate function FSPID; GPIO7 is a JTAG source strapping pin that defaults to floating at reset.
8 IO0 bidirectional GPIO0 with alternate functions XTAL_32K_P and LP_GPIO0.
9 IO1 bidirectional GPIO1 with alternate functions XTAL_32K_N, LP_GPIO1 and ADC1_CH0.
10 IO8 bidirectional GPIO8 with alternate functions ZCD0 and FSPICS0; GPIO8 is a strapping pin (chip boot mode and ROM message printing) that defaults to floating at reset.
11 IO29 bidirectional GPIO29 general-purpose I/O.
12 NC/IO14 bidirectional Not connected on modules without PSRAM, where it can serve as GPIO14; on this PSRAM module it is used as SPICS1 for embedded SPI PSRAM and cannot be used for other functions.
13 IO12 bidirectional USB_D- (USB Serial/JTAG data) with GPIO12 function.
14 IO13 bidirectional USB_D+ (USB Serial/JTAG data) with GPIO13 function.
15 IO9 bidirectional GPIO9 with alternate function ZCD1; GPIO9 is a strapping pin with internal pull-up at reset and is the analog comparator test pad.
16 IO25 bidirectional GPIO25 with alternate function SDIO_CMD.
17 IO26 bidirectional GPIO26 with alternate function SDIO_CLK.
18 IO27 bidirectional GPIO27 with alternate function SDIO_DATA0.
19 IO28 bidirectional GPIO28 with alternate function SDIO_DATA1.
20 IO22 bidirectional GPIO22 with alternate function SDIO_DATA2.
21 IO23 bidirectional GPIO23 with alternate function SDIO_DATA3.
22 NC unconnected No connection.
23 IO24 bidirectional GPIO24 general-purpose I/O.
24 RX0 bidirectional UART0 receive (U0RXD) with GPIO10 function.
25 TX0 bidirectional UART0 transmit (U0TXD) with GPIO11 function; UART0 is used for firmware download and log output.
26 IO3 bidirectional GPIO3 with alternate functions MTMS, LP_GPIO3, ADC1_CH1 and FSPIHD; MTMS is a strapping pin that defaults to floating at reset.
27 IO2 bidirectional GPIO2 with alternate functions LP_GPIO2 and FSPIQ.
28 GND power_in Ground pin of the module.
29 EPAD power_in Exposed ground pad; soldering it to the base board ground is optional and improves thermal performance, using only the correct amount of solder paste.

Key specifications

Parameter Value
Manufacturer Espressif Systems
Package 28-SMD Module
Category RF and Wireless
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VDD33 -0.3 3.6 V 25
Power supply voltage VDD33 3 3.3 3.6 V 25
Current delivered by external power supply IVDD 0.5 A 25
Operating ambient temperature TA -40 85 °C 85 °C version 25
Low-level input voltage VIL -0.3 V 25
High-level input current IIH 50 nA 25
Low-level input current IIL 50 nA 25
Chip reset voltage VIL_nRST -0.3 V 25
Flash power supply voltage (1.8 V) VCC 1.65 1.8 2 V Power supply voltage (1.8 V) 27
Flash power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V Power supply voltage (3.3 V) 27
Flash maximum clock frequency FC 80 MHz Maximum clock frequency 27
Flash program/erase cycles 100000 cycles Program/erase cycles 27
Flash data retention time TRET 20 years Data retention time 27
Flash page program time TPP 0.8 5 ms Page program time 27
Flash sector erase time (4 KB) TSE 70 500 ms Sector erase time (4 KB) 27
Flash block erase time (32 KB) TBE1 0.2 2 s Block erase time (32 KB) 27
Flash block erase time (64 KB) TBE2 0.3 3 s Block erase time (64 KB) 28
Flash chip erase time (64 Mb) TCE 25 100 s Chip erase time (64 Mb) 28
PSRAM power supply voltage (1.8 V) VCC 1.62 1.8 1.98 V Power supply voltage (1.8 V) 28
PSRAM power supply voltage (3.3 V) VCC 2.7 3.3 3.6 V Power supply voltage (3.3 V) 28
PSRAM maximum clock frequency FC 80 MHz Maximum clock frequency 28

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Solder: Sn-Ag-Cu (SAC305) lead-free solder Temperature (°C) 44

CAD (land: Espressif; 3D: Espressif Systems)

  • Symbol: ESP32-C61-WROOM-1-N8R2
  • Footprint: PCM_Espressif:ESP32-C61-WROOM-1
  • 3D model: 28-SMD Module (Espressif KiCad libraries, STEP)
  • 3D model files: esp32-c61-wroom-1-n8r2-etched.step / esp32-c61-wroom-1-n8r2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); esp32-c61-wroom-1-n8r2.step / esp32-c61-wroom-1-n8r2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Espressif Systems datasheet (48 pp, sha256 024a03c9db133d54, retrieved 2026-11-18)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: Espressif's KiCad libraries (CC-BY-SA 4.0); 3D: Espressif Systems's model.

Datasheet PDF